Used Eurocomach Es 85 Zt With 3 Buckets for sale (68,901)

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Laodsyz E T Sopfx Am Nea Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: ready for operation (used), Grundfos SPK8-5/3 A-W-A-AUUV exchange pump D3HNH0403P31126 SN: MK116551 with MG71B2-14FT85-C pump motor No. 85805103,used, good condition, 100% functional, scope of delivery according to photos Ljdpfx Amemq H R Sj Nsaa

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8985870A, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Lsdex Erygjpfx Am Noaa

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 31 859 520, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Lsdpfxjx Eru Rj Am Njaa

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8592093A, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Lajdpfsx Erx Nex Am Nja

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC main spindle drive SN:230902-761859-015, used, normal signs of use, 100% functional, delivery as per photos. Laedpfx Amex Etxde Nea

Condition: ready for operation (used), Heidenhain 359 002-05 interface board SN: 71 324 859 B, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery scope as per photos. Laodpjx Ervzefx Am Nsa

Condition: ready for operation (used), Heidenhain AE LC 281 ID 721 856-02 read head SN 55 349 541, cable length 3 m, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laedpox Dwrcjfx Am Nea

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8533139A, the item has been completely overhauled and comes with a 3-month warranty, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. Lsdpfex Dwrpox Am Noaa

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Ljdpfx Aewyhy Esm Neaa Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Ledjugqvfepfx Am Noaa Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles Laodpfxow U H Sbs Am Noa * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: Lodewx Dbpopfx Am Neaa - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS Lajdpfxswt Iyle Am Noa * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Lajdpoxtwfnsfx Am Noa

Condition: new, Vertical stainless steel storage tank, diameter 2,5 m height 6m with 4 legs, manhole, agitator, 10,6 kW motor, air filter... Lodpfjik Hd Iox Am Noaa

Condition: used, axle configuration: 3 axles, first registration: 08/2008, total length: 13,700 mm, total width: 655,350 mm, suspension: air, tire size: 205/65R17,5, color: other, Year of construction: 2008, Equipment: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 3, Unladen weight: 9,000 kg, Gross weight: 41,800 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2008, Low-loader type: Semi low-loader, Load platform length: 950 cm, Gooseneck length: 380 cm, Ramp length: 300 cm, Extendable chassis: center, Axle make: BPW = Further Information = General Information Cab: Day Registration: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin mounted; Tyre tread left inner: 9 mm; Tyre tread left outer: 8 mm; Tyre tread right inner: 9 mm; Tyre tread right outer: 7 mm Axle 2: Twin mounted; Tyre tread left inner: 6 mm; Tyre tread left outer: 7 mm; Tyre tread right inner: 10 mm; Tyre tread right outer: 10 mm Axle 3: Twin mounted; Steering; Tyre tread left inner: 11 mm; Tyre tread left outer: 10 mm; Tyre tread right inner: 7 mm; Tyre tread right outer: 6 mm Weights Unladen weight: 9,000 kg Payload: 32,800 kg Gross vehicle weight: 41,800 kg Functional Load platform height: 85 cm Environment Emission class: Euro 0 Condition Laodpfoxtkncjx Am Nea General condition: moderate Technical condition: moderate Visual condition: moderate Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing selection • Recognizable quality • Competitive pricing • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • The security of 'recognized quality' • And more… Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2019, operating hours: 3,302 h, 2019 | Case CX210D with 2 excavator buckets | Used Tracked Excavator | 3302 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 69400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 65 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Very good overall condition with some normal wear marks on contact elements and moving points (track pads, pins, bushings, buckets), but nothing concerning. All cylinders (boom, stick, bucket) are working properly without any apparent leaks. The undercarriage, frame, and track frame are structurally sound, with no cracks or major deformations. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40520 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Laedey Eqf Eepfx Am Nja ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), power: 10 kW (13.60 HP), fuel type: electric, color: blue, Year of construction: 2023, operating hours: 455 h, Technical information Track width: 23 cm Drive: Track Empty weight: 1.950 kg Ljdpoyt A Uvsfx Am Neaa Functional Bucket capacity: 0,04 m³ CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: SY001PCC21068 Other information Delivery terms: EXW Transport dimensions (LxWxH): 3,624x1,35x2,41 Production country: CN Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Auto / hydraulic quick coupler - Auto lubrication system - Battery disconnector - Ditching/grading bucket - Hammer hydr. function - Hydraulic adjustable boom - Rotating beacon - Rubber tracks

Condition: used, axle configuration: 3 axles, first registration: 02/2015, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,010 mm, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = Additional information = Axle configuration Tyre size: 385/65 R 22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 3: Tyre tread left: 35%; Tyre tread right: 35% Weights Unladen weight: 920 kg Payload: 38,080 kg Gross vehicle weight: 39,000 kg Functionality Loading platform height: 120 cm Refrigeration engine: Diesel and electric Condition Damage: None Laedpsy Al Thjfx Am Nsa Identification Registration number: OT-87-LN

Condition: used, Year of construction: 2008, operating hours: 10,526 h, 2008 | Hitachi ZX350LC-3 with standard earth boom and long-front boom | Used Demolition Excavator | 10526 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 72800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 50 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Some small repairs to be anticipated, maintenance followed with complete history: handlers, numerous hoses, seals, belts... An excavation boom and a long demolition arm approximately 14 m in length. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40542 Equippo" is commonly used when looking up more details online. Laodsy Azpxopfx Am Nsa 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 221,533 km, power: 155 kW (210.74 HP), first registration: 10/2017, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: white, gearing type: automatic, emission class: euro6, total width: 3,000 mm, total height: 3,000 mm, loading space length: 6,520 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2017, Equipment: ABS, crane, electronic stability program (ESP), parking heater, soot filter, Mercedes Benz 1221 Flatbed + HIAB 077 ES.3 Crane HIAB - Year of manufacture 2017 * 3x Hydraulic extension * 2x Hydraulic outriggers * 1x Radio remote control Flatbed: Length: 6520 mm Width: 2489 mm Height: 600 mm Lsdpfx Amoxir N Ts Njaa Equipment details: * Automatic transmission * Engine brake * Digital tachograph * Radio-CD-AUX * Auxiliary heater * Electric windows Lane assist + Adaptive cruise control Speed control: Cruise control We are happy to assist you with financing/leasing through our partners. All data provided without guarantee. Subject to errors and prior sale.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2001, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total length: 13,950 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,310 mm, color: white, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - Air suspension - Toolbox = Notes = HEAVY DUTY PACTON / JUMBO 13.60 METER CLOSED BOX WITH FULL STEEL CHASSIS, WOODEN FLOOR, BPW AXLES & DRUM BRAKES!! BPW - ECO AXLES!! DRUM BRAKES!! ABS BRAKING SYSTEM!! DIMENSIONS: LENGTH x WIDTH x HEIGHT; Approx. 13.60 x 2.48 x 2.65 M (INTERNAL) WOODEN FLOOR!! ADDITIONAL STORAGE COMPARTMENTS IN FLOOR!! Lsdsv Awktspfx Am Neaa ALUMINIUM REAR DOORS!! MORE TRAILERS (ALL TYPES) IN STOCK FOR SALE, > 75 TRUCKS/TRAILERS AVAILABLE!! SHIPPING, LOADING, STACKING OR TRANSIT REGISTRATION? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO VISIT OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Axle configuration Tyre size: 385/65R22.5 Axle manufacturer: BPW ECO Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 8,090 kg Payload: 31,410 kg gross vehicle weight: 39,500 kg Functionality Body manufacturer: JUMBO 13.60 METER PLYWOOD BOX WITH ALUMINIUM DOORS Condition Technical condition: very good Visual condition: good Identification Registration number: OG-79-LR Further information Contact Sales Department or Erik Engel for further information.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Lsdpfsy Ehl Ejx Am Nsaa Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: used, axle configuration: 3 axles, first registration: 01/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,770 mm, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - Cooling/freezing unit - Air suspension - Disc brakes = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Tyre tread left: 40%; Tyre tread right: 40% Rear axle 3: Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 8,780 kg Payload: 32,220 kg Gross vehicle weight: 41,000 kg Functional Loading platform height: 120 cm Laodpfx Amjyz A Iaj Nja Refrigeration unit engine: Diesel and electric (14,985 operating hours diesel; 1,297 electric) Condition Damage: none Identification Registration number: OR-45-SB