Used Evg Polybend 2-16 for sale (84,710)

Condition: used, Technical specifications: Max. planing width: 160 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom: 3 kW right: 3 kW left: 3 kW top: 5.5 kW bottom: 4 kW right: 4 kW Each spindle has its own motor Toothed roller above the first cutterhead Number of steel feed rollers: 4 Number of rubber feed rollers: 4 Diameter of dust extraction port: 4 x 120 mm Variable feed rate adjustment: 6-18 m/min - 1.2 kW Work table lubrication pump Electric lifting of the machine body - 1.5 kW Power supply: 400 V Total power: 25 kW Overall dimensions: Length: 4100 mm Width: 1600 mm Height: 1500 mm Ibsdsziagmspfx Acpec

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition Ibedpey N Dukofx Acpoc

Condition: ready for operation (used), * Brand: Krupp Ibsdpfx Acjywmd Djpec * Type: DU 14 * Surface: 7000 x 1600 mm - 2 decks * Incl.: 30 kW E-motor and springs

Condition: ready for operation (used), * Brand: Svedala * Surface: 6000 x 1600 mm - 2 decks Ijdpfeywl Riex Acpsbc * Driving: E-motor 18,5 kW * incl.: springsupports and new springs.

Condition: like new (used), Robot mounted on a two-segment track, with each segment measuring 6 m in length, allowing a total travel distance of 12 m at a height of 3 m, supported by special columns. The track can also be installed on the floor, but this requires minor modifications. Year of manufacture: 2022 Serial number: 1306063 Payload: 16 kg Reach: 2013 mm Weight: 296 kg Isdpozzbcaefx Acpobc Controller: KR C4

Condition: used, overall weight: 16,000 kg, axle configuration: 2 axles, first registration: 03/2008, Year of construction: 2008, Equipment: ABS, tail-lift, ACKERMANN TRAILER – LBW 2 TON – INSULATED WALLS – GOOD TIRES – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * Type: EAF 16-7.3 * DISC BRAKE * MERCEDES AXLES * AIR SUSPENSION * INSULATED WALLS * NEW BODY * 7.20 M LONG * 2.40 M HIGH * 2.45 M WIDE * TIRE SIZE 385/55R19.5 Iodpezxvv Nefx Acpjbc * GOOD TIRES * MAX. PERMISSIBLE TOTAL WEIGHT: 16,000 KG * UNLADEN WEIGHT: 5,050 KG * PAYLOAD: 10,950 KG * EXPORT SALES ONLY WITH A DEPOSIT OF MIN. 500 – 2000 * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIA LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. A deposit of at least 500.00 / 1,000.00 will be charged for sales to EU and third countries. Subject to change, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and does not therefore constitute guaranteed characteristics.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * On Stock: 2 pieces * 1x Surface: 5000 x 1400 mm - 2 decks * 1x Surface: 5000 x 1600 mm - 2 decks Ibjdpfx Asywngyocpsc * Incl.: E-motor and springs.

Condition: ready for operation (used), * Brand: Gfa Iodpeywl Smofx Acpjbc * Surface: 4200 x 1600 mm - 2 decks

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Iedpfx Asx D I Alecpsbc • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets Isdpsz H H A Tefx Acpsbc M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: good (used), Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR16-2-F Foundry Year of manufacture: 2012 Operating hours: approx. 11,000 hours Iedpfxjtukiqo Acpjbc Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka controller KRC2ed05 Year of manufacture: 2009 Weight: 207 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connecting cables 7m/15m 61026ä

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Ibodpfx Acozuzvgspec Goedhart Freon evaporator full cascading refrigeration pack included in a container More photos and spec upon request

Condition: used, Year of construction: 1999, Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement. Isdpfx Acsz N Ha Ejpebc

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 Ibodpfx Acjz Ikq Djpsc EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Ibjdpfx Aez Rn A Docpjc Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with loading magazine Iemca CH 220/32 Year of manufacture: 1998 Ibsdpfx Acsz Hcciopsc Technical data: Spindle bore: 16 mm Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim Iedpfxjzhtfmj Acpobc See pictures

Condition: new, number 55 Positionen 16 mm condition neu weight 23 kg Ibjdpfsgarhyex Acpjc Set 2 55 pieces, 16mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Prism: 4 x 160645.1.N Bolt: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: good (used), Year of construction: 2015, Industrial robot Manufacturer: Kuka Type: KR16-2 Year of manufacture: 2014/2015 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka KRC4 controller Year of manufacture: 2015 Weight: 145 kg Software version: V8.3.40 Kuka touch panel Ijdpfx Acoi Ezwbjpebc Kuka connecting cables 51026

Condition: used, ABB Robot IRB 2400/16 Type B Ijdjznkmbopfx Acpsbc M2004 Industrial Robot IRC 5 Robot 2 units in stock.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Ibodoz Ixpuepfx Acpsc Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231493, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 12 mm Ibodpfx Acez Iruwopsc - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Type: KR30L16-2 (SafeRobot) Isdpfx Acon Uv S Aopebc Year of manufacture: 2011 Reach: 3102 mm Weight: 700 kg Payload: 16 kg Kuka controller KRC2ed05 (SafeRobot) Weight: 185 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka teach pendant: KCP2 Kuka connection cables: 7 m / 15 m 61026

Condition: used, Year of construction: 1997, functionality: fully functional, load capacity: 1,000 kg, opening width: 1,250 mm, overall weight: 860 kg, For sale is a stack turner in very good condition and fully functional. Ibodpfx Ajz Ai Hvocpec

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MMFE 422132/35, Müller Martini 3631 CB-16, manufactured in 2001, compensating collator and stacker designed for the automatic stacking of bound books and printed materials. Maximum size: 450 x 340 mm (varies by model version, up to 470 x 320 mm) Minimum size: 140 x 100 mm Product thickness: 3–70 mm Maximum speed: Up to 18,000 pieces per hour The machine is currently in production. The CPU battery needs to be replaced. After purchase, the machine will be dismantled and packed for delivery. The machine will be taken out of production in early 2027. Ijdpfxjz Dftfs Acpjbc Do not hesitate to contact us for more information.