Used Evotec Srs 1300 for sale (2,615)

Condition: used, Year of construction: 2001, Thermo-lamination system Manufacturer: BÜRKLE Lasdpfezuzt Ssx Acfsf Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding. Lajdpfezuzqdjx Acfef

Condition: good (used), Saw blade diameter: 1310 mm Cutting diameter: 440 mm Machine weight: approx. 7.5 tons Lsdpfx Aozvawxecfjaf

Condition: new, cutting diameter 1100 mm saw band length 12000 x 67 mm cutting width 1,6 mm Capacity 90° - round 1100 mm Capacity 90° - rectangle 1100 x 1100 mm Capacity 90° - square 1100 x 1300 mm Laodoymf Ncopfx Acfsf total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 12.000 kg dimensions of the machine ca. 3300 x 3000 x 5300 mm The KSS 1100 X 1300 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table, which is 1 metre long.

Condition: new, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Lasdjymf Ryepfx Acfef Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 total power requirement 7,5kW / 3100 Nm Lajdpfey S Duiex Acfef weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 1996, machine/vehicle number: A9611003/0100, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left Lodpfx Acjyyyhujfjaf - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 Laedpfx Aexrb Rfecfsf - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 610082, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm Ledpfx Aezubpaocfeaf - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Year of construction: 2026, condition: new, functionality: fully functional, Achieve high efficiency with precision! The core cutter (standard 76 mm / 3 inches) features an automatic core magazine. The menu is in German. Laedpfx Acozt Rxhsfsf Process-controlled feeding of the core material and precise cutting to pre-programmed width and number of cores. Additional core adapters are available in 25 / 40 / 50 / 101.2 mm.

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. Lasdpfx Ajzd U D Njcfof 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Laodpfx Aoyddy Ijcfef

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Lsdpfx Aey Uydfecfoaf

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Lajdoygw Sijpfx Acfof

Condition: ready for operation (used), Year of construction: 2007, A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible. Ljdpey Ax Tbefx Acfoaf

Condition: ready for operation (used), Year of construction: 2018, Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Ledpfxswg E Aks Acfeaf

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Lajdsyddyzspfx Acfjf

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Ljdpfx Acjyddzfefsaf

Condition: ready for operation (used), Year of construction: 1992, An FTH Fördertechnik bag palletizing system is available. Formation: 5-bag, palletizing capacity: approx. 1500 bags/h, pallet dimensions X/Y 1: 1200mm/800mm, pallet dimensions X/Y 2: 1200mm/1000mm, stacking pattern: variable, overall system dimensions X/Y: approx. 12600mm/5700mm. An on-site inspection is possible. Laedpfx Acoxd Avaefef

Condition: used, Technical specifications: Lodpfxszvmr Ne Acfjaf Max. cutting height: 370 mm Max. cutting width: 780 mm Wheel diameter: 800 mm Max. belt width: 40 mm Min. belt width: 15 mm Working table dimensions: 1100x950 mm Working table tilt angle: 0-25° Dust extraction port diameter: 100 mm Safety switch Motor power: 4 kW Voltage: 400 V Overall dimensions: Length: 1400 mm Width: 950 mm Height: 2500 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Equipment Laodpfx Asd Idlaecfsf • drying tower upward • infeed left at the bottom • outfeed 90° at the top

Year of construction: 1999, condition: good (used), Built in 1999 Sheet size: max 420 x 300 mm min 170 x 140 mm Cover size: max 420 x 640 mm min 170 x 290 mm Book thickness: max 45 mm min 2 mm Cover thickness 100 - 350 g/qm Speed max: 960 c/h Dimensions: 3050 x 180 x 1600 mm Stromart 400/50 V/Hz Weight 1600 kg Laedpfohcw Rmsx Acfef Equipment: - 4 clamps - hot glue basin with side gluing - cover feeder with 4-up scoring - dust extraction - belt delivery - unloader

Condition: used, mileage: 323,400 km, power: 324 kW (440.52 HP), first registration: 03/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro6, total width: 2,500 mm, total height: 3,630 mm, loading space volume: 22 m³, loading space length: 5,650 mm, loading space width: 2,400 mm, loading space height: 1,600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * MAN TGS with tipper body and rear-mounted crane * Bordmatik on the left (2 cylinders) * Crane: Hiab Jonsered 1300 RS 83 * Hydraulic grab: KG 25-2-1000 * High seat control (Euro control) * Chassis with leaf suspension * Rear axle differential locks * Rear axle as AP axles * Trailer brake system * D 50 trailer coupling * Duomatic brake connection * 2-circuit trailer hydraulics * Centrally positioned cab * Rotating beacons * Electric windows and mirrors * Air horns * Sun visor * Seat heating * Auxiliary heater * Automatic climate control Lajdewhtxijpfx Acfsf * Refrigerator * CB radio * Air-suspended driver’s seat * and much more. * Subject to errors and prior sale.

Condition: used, Year of construction: 1967, total height: 2,000 mm, total width: 1,500 mm, total length: 1,800 mm, Colour: Grey Ledeyym Riopfx Acfsaf Empty weight: 3.000 kg - Year: 1967 - Documentation available: Yes - CE certificate present: No - Serial number: 2166 - Drive system: Conventional - Horizontal/vertical: vertical - Power [kW]: 4.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 900 - Y-axis travel [mm]: 220 - Z-axis travel [mm]: 380 - B-axis rotation [°]: 360 - Table length [mm]: 1300 - Table width [mm]: 300 - Tool holder: ISO40 - Main spindle power [kW]: 3.5 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1360 - Transport dimensions: 1800mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Ledpfxjzghrls Acfeaf Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.