Used Fasti 2040 X 4 for sale (90,940)

Condition: new, Year of construction: 2026, machine/vehicle number: P786, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, pressing force: 60 t, stroke length: 215 mm, operating speed: 280 mm/s, reverse speed: 170 mm/s, table length: 1,550 mm, throat depth: 255 mm, distance table to ram: 400 mm, clearance between the columns: 1,200 mm, oil tank capacity: 120 l, overall weight: 6,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Small, powerful all-rounder! Also suitable for multi-station operation! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet construction, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability and efficiency, together with easy operation, allows us to meet the highest requirements and accuracies in the bending process. Press force: 600 kN (60 t) Working length: 1,550 mm Distance between uprights: 1,200 mm Installation height: 400 mm Overhang: 255 mm Bledpoz Hnz Defx Ahmsn Ram stroke: 215 mm Lower bed height above floor: 947 mm Rapid traverse max.: 250 mm/s Pressing traverse max.: 9.8 mm/s Retract traverse max.: 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 5.5 kW Hydraulic oil tank capacity: 120 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 7 t Description: > Machine body: Steel S 355 N Design based on FEM analysis Side stands with two pressure tubes Floor-standing 2-component structural paint RAL 7004 / 7016 > Hydraulics & upper beam Proportional valve control, electronically monitored cylinder synchronization Press beam stress-relieved annealed, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC, fully hardened Bottom: narrow table, single V (13 × 20) Reinforced lower bed, no mechanical deflection required > Support arms 2 aluminum support arms at the front, approx. 600 mm, with tilting stops Can be moved on ball bearing linear guide Height-adjustable for dies from 55 to 100 mm > Back gauge 2-axis X-axis 950 mm, 300 mm/s, ± 0.01 mm R-axis 200 mm, 150 mm/s, ± 0.01 mm Z-axis manual with quick clamp, 2 stop fingers > Control system: Delem DA 66S 24″ touchscreen on swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety CE-compliant, Pilz safety PLC TFS laser light curtain, moving with the ram Rear light curtain > Control technology Back gauge with AC servo technology Compensation for side stand deflection and temperature-related stand expansion Dynamic press force control, LED work area lighting including lighting behind the machine

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Blodoygv S Uspfx Ahmjn Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Blodpfx Ajyzc Iaehmsn Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Blodpfxoz Ebbzj Ahmen Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Documentation CE marking

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Rapid Water Level Control – adjustable water level (raise/lower) Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Pump hours: 0 The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Bedpfx Aown El Ujhmeln Delivery and installation can be discussed if required.

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Stroke: 200 mm Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Accessories: Segmented AMADA tools, new Lateral safety devices Condition: The machine is in very good overall condition Bjdpfx Asznl U Tjhmjln Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Bedpfx Ahozdak Asmjln Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused -CE marking Blodpfxsziviks Ahmon -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry Blodpezt Sxvofx Ahmsn

Condition: good (used), Equipment: type plate available, Ystral Type X 11,000 S/LDT-4-154P Disperser based on the rotor-stator principle on a stand, without control unit Blodpfx Ahjzp Nvwemjn The YSTRAL disperser is designed for the production of emulsions and suspensions in the medium-viscosity range. It meets high requirements for fine dispersion, even in the medium-viscosity range, and is used for batches up to 2,000 liters. Drive: 2,910 RPM / 11.0 kW

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Any warranty is excluded. Bjdpfx Ahezibtnsmeln We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Year of construction: 1990, machine/vehicle number: 98 / 1, Item No. 26247 Technical Data: - max. working width 2040 mm - max. material thickness at 40 kp/mm² tensile strength 3.5 mm - bending angle adjustment, electronically pre-selectable, 0 - 135° - smallest bending radius 1.25 x sheet thickness - smallest inner flange height 6 x sheet thickness - automatic sequential control for a complete work cycle - operation via hand or foot buttons - largest opening width / stroke of the upper beam 200 mm Bjdpfxozzzhcj Ahmeln - height adjustment: - of the upper beam 80 mm - of the lower beam 80 mm - upper beam drive 400 V / 1.1 kW - bending beam drive 400 V / 1.5 kW - manual rear stop, operable from the front - various bending strips, split gooseneck tool (incomplete) - space requirement approx. W 3300 x H 1350 x D 1500 mm - weight approx. 2600 kg

Condition: good (used), functionality: fully functional, 1 x Bertuetti 4 x roller dough moulder for pieces up to 1500g. Bljdpfxsy Aic To Ahmsn Model - SIMPLEX.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 Construction: steel + aluminum Working area: 4000/2000/200 XY axis drive: double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion Z axis drive: stepper motor, ball screw Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files via external pen-drive Sheet detection system THC height control system TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion Y axis: stepper motor and rack and pinion Z axis: stepper motor and ball screw Drives implemented using TBI HGR 20 rails Table equipped with a water table (water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) INCLUDED: - water table - replaceable grating - control program in Polish Blsdpsiphrlefx Ahmen - CE declaration of conformity - technical documentation - warranty - commissioning and training included in the price The latest control system available in our cutters: Integrated THC height regulator Anti-torch dive function Accepted file types: DXF, PLT (hpgl), G-Codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Cutting parameter database Project angle correction to material Ability to cut from any location Ability to cut from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to the material layout angle Soft and Hardware limits THC anti-dive functions Game Pad control possible Material detection via touch system, floating head WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY; THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFESPAN, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUSCEPTIBLE TO DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET CUSTOMER REQUIREMENTS WE HELP IN ARRANGING LEASING Possibility to select the appropriate cutter to meet the individual needs of the company. We offer other table sizes.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Bedpfxjiphu Is Ahmeln Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.

Condition: used, Year of construction: 1985, Max. bend length: 1020 mm Max. Sheet thickness: 2 mm steel Bsdpfjzvw S Tjx Ahmoln Good condition Weight: 400 kg

Condition: used, Year of construction: 1961, sheet width 1020 mm Bledpfx Ajzfax Iehmsn plate thickness 2 mm

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Bodpov Tmxuofx Ahmoln Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Blodjzwcniepfx Ahmsn Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Model: PC 4000 Condition: very good Year of manufacture: Category ID: 1470 Type ID: 1258 Blodjzxptbepfx Ahmen Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Blodpfxjx U Dwvj Ahmon

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Bledpez Icuhofx Ahmen Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: used, Year of construction: 1998, operating hours: 8,260 h, Equipment: all wheel drive, * From municipal hands * Cemetery excavator - mini excavator * Manufacturer Kiefer - Boki 4550 * KW 40 / 1896 cc Bjdstttu Dopfx Ahmoln * VW engine * Operating hours: only 8260 h * Year of manufacture: 1998 * Dimensions: 4900 mm long, 1210 mm wide, 3200 mm high * ALL-WHEEL STEERING * Road legal * Heating * Hydraulic connection for HAMMER OPERATION * Extension for grab boom * Support extension * etc. * All information without guarantee * We reserve the right to sell the item prior to delivery * Please refer to our terms and conditions

Condition: used, Year of construction: 1992, Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bodpezv Tvzsfx Ahmoln Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication operation manual 5000 kg

Condition: used, Year of construction: 2016, operating hours: 5,110 h, Equipment: ABS, all wheel drive, * Kubota KX 057-4 mini excavator Bljdpfszurg Aex Ahmen * 5 units in stock * Year of manufacture: 2016 * Operating hours: 5,110 h * Air conditioning * Lehnhoff quick coupler * 1 x digging bucket * Weight: 5,500 kg * Complete hydraulic system * More pictures and videos available via WhatsApp * Information without guarantee, subject to prior sale.