Used Felino Sm10I-Ct for sale (3,969)

Condition: good (used),

Year of construction: 2026, condition: new,

Year of construction: 2026, condition: new, KEY SPECIFICATIONS Battery One 58 V lithium-ion battery, up to 3.56 kilowatt hours (3.20 kilowatt hours nominal), sealed, and IP66 rated Charger Internal, 700 watts, 240 V input Engine - Power Engine - Model Number Forward Speed 0-11.3 km/h 0-7.0 mph Front Caster Tires 11x6-5 Drive Tires 18x8.50-8 Backrest Height High-back seat with armrests, 51 cm 20 in. Cutting Width Accel Deep™ deck, 107 cm 42 in. Accel Deep™ deck, 122 cm 48 in. Mulching System Optional MulchControl™ kit Warranty ENGINE Power Model Number Displacement Cylinders Lubrication Type Battery Throttle/Governor Cooling System Fuel Tank Capacity Fuel Gauge DRIVETRAIN Battery One 58 V lithium-ion battery, up to 3.56 kilowatt hours (3.20 kilowatt hours nominal), sealed, and IP66 rated Charger Internal, 700 watts, 240 V input Double Hydros Hydraulic Pumps Wheel Motors Transmission Dual electric motor with 2.5 cm spindles TRAVEL SPEED Forward Speed 0-11.3 km/h 0-7 mph Reverse Speed 0-5.6 km/h 0-3.5 mph Speed and Direction Control Dual levers Control Adjustment 3 height positions/11 positions CHASSIS Frame Reinforced 6 x 5 cm (2.5 x 2 in.) frame rails in the front and 4 x 5 cm (1.5 x 2 in.) on the sides Prjdpfo Agrvgox Ai Tec Paint E-coating/powder coat Front Caster Tires 11x6-5 Front Wheel Bearings Sealed ball bearings Drive Tires 18x8.5-8 Hour Meter Yes Maintenance Interval Sticker Yes Storage Compartment Standard with lid Cup Holder Yes Maximum Towing Capacity 113 kg 250 lb SEAT Backrest Height High-back seat with armrests, 51 cm 20 in. Fore/Aft Adjustment 7 cm 2.9 in. Seat Suspension Two springs LIFT SYSTEM Type Foot-lift system Deck Lift Height 3-11 cm 1.25-4.5 in. Cutting Height Adjustment Increments 0.64 cm 0.25 in. Preset Cutting Heights Yes DECK Cutting Width Accel Deep™ deck, 107 cm 42 in. Accel Deep™ deck, 122 cm 48 in. Type Side discharge Deck Material 42A: 12 gauge 2.7 mm 0.105 in. 48A: 10 gauge 3.4 mm 0.135 in. Deck Drive System Electric motor POWER TAKE-OFF (PTO) Type Drive DIMENSIONS Wheelbase 1255 mm 49.4 in. Overall Length 1915 mm 75.4 in. Width (without deck) 1100 mm 43.3 in. Width (with deck) 42A: 1280 mm 50.4 in. 48A: 1590 mm 62.6 in. Width (with deck, deflector up for storage) 42A: 1180 mm 46.5 in. 48A: 1340 mm 52.8 in. Height 1100 mm 43.3 in. Weight 42A: 222 kg 490 lb 48A: 245 kg 540 lb SAFETY Rollover Protective Structure (ROPS) No Slope Operating Limit 13 degrees; 10 degrees with collection system Operator Presence System Yes Parking Brake Interlock Yes Safety Video Yes, online BUYER NOTES Note 1 Mow with confidence 8000 m2 (0.8 hectares) (107 cm deck) or 7200 m2 (0.72 hectares) (122 cm deck) on a single charge Note 2 Smart charger is integrated into the mower; you can charge anywhere with an outlet Note 3 Sealed battery is IP66 rated, allowing you to wash the mower with a garden hose Warranty OPTIONAL

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Maximum turning diameter over the bed cover 400 mm Maximum turning diameter over the compound slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Speed range 25 – 4000 rpm Feed range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Podpfxsz Icuzj Ai Terc Taper in spindle MK 4 Tailstock quill stroke 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Manual 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, tool holder bore Ø 30 mm, DIN 69880 • Swiveling chip conveyor with coolant system • Electric foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2026, condition: new, Engine displacement: 726 cm³ Cutting width: 107 cm / 122 cm Engine type: Kawasaki V-Twin 2-cylinder Width: 130 cm Length: 181 cm Minimum cutting height: 25 mm Maximum cutting height: 102 mm Power: 13.7 kW - 17.7 hp Drive: Hydrostatic Weight: 269 kg Podpe Agrwpjfx Ai Tjrc Voltage: 12 V Fuel tank capacity: 13.2 liters Mulching kit: optional Collection system: optional Bumper: optional The John Deere X370 riding mower with side discharge is a reliable choice for efficiently mowing medium to large lawns. With a cutting width of 107 cm (42 inches) or 122 cm (48 inches), this riding mower offers a quick and effective way to maintain large areas. The X370 is equipped with a Kawasaki FS600V two-cylinder gasoline engine with a displacement of 603 cc. This powerful and quiet engine delivers excellent performance, even under heavy use. The side discharge cutting deck ensures efficient distribution of the cut grass, while optional accessories, such as a mulching kit or grass collection system, make the mower even more versatile. The cutting height can be easily adjusted from 25 to 102 mm, allowing you to maintain your lawn exactly to your liking. Thanks to the Twin Touch foot controls, the hydrostatic transmission is smooth and easy to operate, allowing you to effortlessly switch between forward and reverse. The ergonomic design, adjustable seat, and intuitive controls ensure that long mowing sessions are comfortable and easy. In addition, the excellent maneuverability of the X370 makes it easy to maneuver around obstacles and lawn edges. The John Deere X370 with side discharge is built to last. The sturdy steel frame and durable materials guarantee reliability and a long service life. In addition, the mower is designed to make maintenance easy, so you can always keep it in optimal condition. Whether you want to maintain a large lawn or are looking for an efficient and comfortable riding mower, the John Deere X370 with side discharge is an excellent choice. With its powerful performance, ease of use, and robust design, this mower offers everything you need for professional lawn care. STANDARD DELIVERY DOES NOT INCLUDE A CUTTING DECK, please inquire about the options.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, 1 x Fortress Technology mobile metal detector with alarm and belt stop reject system, mounted on a stainless-steel frame with castors (mobile). Pedo Afpgxopfx Ai Terc Model - STEALTH. Serial number - ET4344. Aperture dimensions - 550mm wide x 325 high (237mm clearance/useable). Frequency - 75 kHz (suitable for fresh products only). Belt - Plastic mesh belt, 505mm wide. Overall dimensions - 1750mm long x 1050mm wide x 1340mm high. Electrical requirements - 230 V / 50 hz / 3 phase.

Year of construction: 1982, condition: ready for operation (used), A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible. Prsdpfx Aoydp Azji Tjc

Year of construction: 2026, condition: new, Cylinder capacity: 726 cm³ Prsdpfx Ae Agryvji Tjc Cutting width: 107 cm - 42 inches Engine type: Electric motor Width: 130 cm Length: 181 cm Min. cutting height: 25 mm Max. cutting height: 102 mm Drive: Electric Weight: 269 kg Voltage: 240 V Tank capacity: 13.2 liters Mulching kit: optional Collection system: optional Bumper: optional The John Deere Z370R electric zero-turn Ztrak riding mower with a cutting width of 122 cm (48 inches) offers a powerful, quiet, and innovative solution for maintaining medium to large lawns. This mower combines efficient performance with the maneuverability characteristic of zero-turn mowers, allowing you to mow your lawn quickly and easily, even around obstacles. The Z370R is powered by a reliable electric motor combined with a powerful 48V lithium-ion battery. This battery provides sufficient capacity to mow large areas in a single session, depending on the conditions. The emission-free and quiet operation makes this mower ideal for use in noise-sensitive environments and contributes to more sustainable lawn care. The side-discharge cutting deck efficiently spreads the grass and provides a neat, even finish. Optionally, you can choose a mulching kit or grass collection system for even greater versatility. Thanks to the zero-turn technology, the Z370R is extremely maneuverable and you can easily navigate around trees, flower beds, and other obstacles. The independent steering levers allow for very precise steering and tight turns, saving you time when mowing complex lawns. Comfort is a priority with the Z370R. The ergonomic seat with a high backrest and armrests provides a comfortable seating position, even during longer mowing sessions. The intuitive controls make the machine easy to use, even for people who have never used a zero-turn mower before. The adjustable cutting height from 25 mm to 102 mm ensures that you can maintain your lawn to your liking. The mower is built with a robust frame and high-quality materials, ensuring a long service life. The electric drive also means less maintenance due to the absence of a traditional internal combustion engine. The battery is easy to charge via a standard outlet, so the machine is always ready for use. The John Deere Z370R electric zero-turn Ztrak riding mower with a 48-inch (122 cm) cutting deck offers the perfect balance of power, precision, and ease of use. It is the ideal choice for anyone who wants to maintain their lawn effortlessly and quietly, with excellent results and maximum comfort.

Condition: excellent (used), functionality: fully functional, mileage: 204,020 km, power: 73 kW (99.25 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,062 mm, first registration: 03/2023, next inspection (TÜV): 04/2027, loading space length: 2,150 mm, loading space width: 1,520 mm, loading space height: 1,210 mm, emission class: euro6, color: white, tire size: 205/60R16 96H Continental, Profil ca. 70%, number of seats: 2, number of previous owners: 1, machine/vehicle number: WFOSXXWPGSNA76022, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, summer tires, traction control, truck registration, winter tires, Very clean and well-maintained accident-free lease return vehicle from a private owner with high-quality special equipment, non-smoking vehicle, long-distance company vehicle Ford Transit Connect 240 long L2 Trend, Euro 6 with truck registration, rear wing doors with windows, partition with window and protective grille, PDC, 8 tires – aluminum rims with Continental tires and additionally 4x M+S Continental winter complete wheels, etc. • 6-speed transmission • ABS with EBD • Exterior mirrors, electric, adjustable and heated • Hill start assist • Rubber floor covering, with original Ford rubber floor mats at the front, removable • On-board computer with outside temperature display • Brake light, third • Diesel particulate filter • Double-wing rear door with window • Full partition with window and protective grille • Electronic safety and stability system • Electric windows front • Ford Easy Fuel • Ford Pass Connect • Heated windshield • Glove compartment with lid • Interior lighting, rear • Interior lighting, front • Air conditioning incl. electric recirculation control • Cargo area floor protection, plastic, molded • Cargo area lining, side, half-height • Steering column, adjustable • Center console, front • Fog lights • Emergency brake light • Radio: Ford Audio System 2 • Seat package - 4 • Sliding door, rear, right • Side protection strips, plastic • Power steering, electro-mechanical (EPAS) • Safety brake assistant • Seat belts • Automatic central locking • Front spoiler lip • Start-stop system • Dust and pollen filter • Storage compartment, concealed, on dashboard • Socket in storage compartment • Socket on center console, front • Front bumper, body color • Daytime running lights • Child safety lock on sliding doors • Tie-down eyes • Immobilizer, electronic (EPATS) • Heat-absorbing glass, lightly tinted • Central locking with remote control • Auxiliary heater, electric (PTC), front • 2nd remote control key for central locking Predpfx Aj Agtn Rei Tec • Heated rear window • Rear parking pilot system • Cargo area dimensions: Length 2,150 mm, Width 1,520 mm, Height 1,210 mm • Euro 6 Fully maintained according to service schedule. Last Ford service was performed in 12/2025 with a mileage of 178,652 km. Front brake pads and battery new! Vehicle available immediately. If you have any questions, please do not hesitate to contact us by phone. The vehicle description is for informational purposes only and does not constitute any warranty in the legal sense. Information on accessories is without guarantee, subject to changes, prior sale, and errors! We are members of the Federal Association of Independent Car Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, TERMIK Range Gas or diesel-powered 5 decks, 15 openings Usable area: 23.10 m² With integrated loading elevator Maximum power: 128,000 kcal/h, equivalent to 149 kW Forced hot air circulation 2 fans on the 180 series High-efficiency heat exchanger Heat distributed between ceiling and floor Independent steam generator per chamber Steamers located near the combustion cylinder Steamers’ power consumption: 1.5 to 2 kW Standard steam generator: 4 kW Stainless steel and tempered glass doors Removable doors for cleaning Overpressure valves on each chamber Electrical panel with IP55 protection Prodpfezyaktex Ai Tsc Steamers accessible from the front Internal dimensions: 1850 x 2500 mm External dimensions: 2485 x 3650 mm Loading clearance: 3060 mm Used Tagliavini CT 185/L cyclothermic oven – 23.10 m² baking area General Overview The Tagliavini TERMIK CT 185/L is a professional, multi-deck cyclothermic oven designed for bakery operations that require a large baking area and even heat distribution. This configuration features 5 baking chambers for a total usable area of 23.10 m², with internal dimensions of 1850 x 2500 mm. The cyclothermic principle is based on the forced circulation of heat from the combustion chamber. In the 180 series, two fans direct the heat flow through the ducts surrounding the chambers, achieving a balanced temperature from the bottom to the doors. The CT 185/L can operate on gas or fuel oil/diesel.

Year of construction: 2026, condition: new,

Condition: excellent (used), Year of construction: 2000, I sell the widebelt sanding machine Costa A CT 1150, year 2000. Configuration hard rubber cylinder - electronic segmented pad. Working width 1150mm Bands 1180x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2300kg 2 motors 15 + 11 kW Prsdpfx Aiog Trubo Toc Additionally built brushing unit with bottom cleaning brush. Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Year of construction: 2004, condition: good (used), LBL Brenta Spaner CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm Free central blade, overheating protection Clearance = 800 mm Fast, precise positioning via servomotor with electrical system. Prjdpjyuc Niefx Ai Toc

Condition: excellent (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 5044Q01A, conveying length: 2,000 mm, working width: 1,300 mm, Powered roller conveyor with UV lamps for preheating, approximately 600 operating hours, in excellent condition. Predpfoy Emldox Ai Tjc

Year of construction: 2026, condition: new, includes charging cable 122 cm deck includes on-demand mulching Prodpo Agttysfx Ai Tec

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - Ingress Protection Rating: IP54 Psdpfx Aephpi Esi Terc Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, functionality: fully functional, NEW CT-300 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 3 tons/hour (5 m3/h) - Motor: 15 kW / 20 HP - 480V, 3-phase (440V compatible) - Screw speed: 25 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 163 x 35 x 77 in - Weight: 5,000 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay Prsdpfxo Adyk Ee Ai Tsc - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: ready for operation (used), Year of construction: 1993, Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Prsdpeltlx Tefx Ai Toc Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Suction hood diameter 140 mm 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Year of construction: 2013, condition: used, Bread divider • Year of manufacture: 2013 Pedpfx Aioy Ukmqo Tjrc • Machine in working order • Imported from a German bakery We also have a wide selection of used bakery and confectionery equipment. Please contact us – communication is possible in English, German, and Russian.

Condition: new, functionality: fully functional, NEW CT-160 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 0.5 tons/hour (1 m3/h) - compact pilot / small-operation model - Motor: 3 kW / 4 HP (electrical built to order) - Screw speed: low-speed high-torque design - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: adjustable back-pressure - Footprint: 56 x 17 x 58 in - Weight: 700 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices Pode Adykrjpfx Ai Terc - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: good (used), machine/vehicle number: 15464, Year of construction: 1990, load capacity: 1,300 kg, lifting height: 2,600 mm, load center: 600 mm, fuel type: diesel, mast type: other, construction height: 1,870 mm, fork length: 1,150 mm, enginetype: Diesel, manufacturer: OM Prjdpfx Asxz Sn Toi Tsc Serial Number: 72790116121

Condition: new, Year of construction: 2025,

Condition: new, Year of construction: 2025,

Condition: used, first registration: 10/2001, Year of construction: 2001, Nooteboom 4-axle container chassis, divisible into 2 sections - 1st section: 1 axle - 11,000 kg gross weight - 2nd section: 3 axles - 26,000 kg gross weight - ABS - Air suspension - 4 x BPW Eco Plus axles Psdpfjwmpa Hsx Ai Tsrc - 1st axle liftable - Raise/lower device - 2 support legs each at front and rear - Tyres: 385/55 R 22.5 - German semi-trailer - TÜV / inspection / SP: New on request and at extra charge! Errors and interim sale reserved!

Condition: new, functionality: fully functional, NEW CT-400 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 5 tons/hour (8-10 m3/h) - Motor: 30 kW / 40 HP - 480V, 3-phase (440V compatible) - Screw speed: 20 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 177 x 39 x 79 in - Weight: 7,050 lbs WHY ZEN SURFACE LLC Prjdpfs Adyk Sex Ai Toc - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.