Used Filter Extractor Laboratory Extractor for sale (9,557)

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Kedpeumm Npefx Ab Iolu

Condition: excellent (used), GEA OptiAir dust extractor unit. 2015 machine in nice condition. We have GEA OptiFlour II 600 units in stock to run with this. Kljdpfx Abjv Ig Rms Iou

Condition: good (used), 1 x Lavamac washer extractor. Model LH1200 Year 2009. Ksdpszfkpkjfx Ab Ielu

Condition: good (used), Poeth dust point filter KMV 6/20R15 Approx. 8 m2 filter surface Fan motor power 1.1 kW, 3000 rpm Equipped with new membrane valves Kledpfjwygb Iox Ab Isu

Condition: good (used), Year of construction: 2019, Mist extractor Kedpetu Uxrsfx Ab Ijlu

Condition: good (used), Filtration system extraction unit filter unit dust filter filter cabinet Infastaub Filter surface area 22.5 m² 900–1080 m³/h Includes new holders and filter bags All stainless steel Diameter 800 mm Kljdpjwyf Tpefx Ab Iou Height 860 mm Equipped with compressed air-cleaned filter Equipped with control cabinet See our other advertisements

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Lockable by lid Ksdpswyf Iyjfx Ab Islu Full sensor present Control cabinet excl. cabling Equipped with pneumatic bunker vibrator Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available See our other advertisements

Condition: good (used), Filter box Exhaust system dust filter extractor dust collector DCE Dalamatic Fitted with 6x sintamatic filter cartridges Fully serviced Fan power 1.1kW 3000rpm See our other advertisements VMA Wekerom Kedpfx Abowyf Aws Iolu

Condition: new, WAM FLO dust collector, extraction hood, filter housing, extraction system New Fan motor power: 3 kW, 3000 rpm Filter area: 22 m2 Equipped with electro-pneumatically cleaned filter cartridges Stainless steel 304 Zero dust emissions 7 units in stock See our other listings Kjdpewyf Aqsfx Ab Ielu VMA Wekerom

Condition: excellent (used), Thermo Scientific Heratherm OMH180 Convection Drying Oven Manufacturer: Thermo Scientific Type: Heratherm OMH180 Machine Type: Convection Drying Oven / Laboratory Oven Internal Volume: approx. 180 liters Max. Temperature: 330 °C For sale is a used convection drying oven from the manufacturer Thermo Scientific. The device is suitable for laboratory applications, research, quality assurance, as well as material and sample drying. Kedpfjzfzcbex Ab Ielu Technical Data Max. Temperature: 330 °C Internal Volume: approx. 180 liters Convection Operation: Yes Interior: Stainless steel Digital Temperature Control Power Connection: 230 V Frequency: 50 / 60 Hz Rated Current: 13.3 A Power Consumption: 3.06 kW Protection Class: IP20 Dimensions approx.: 620 x 630 x 800 mm (W x D x H) Weight approx.: 75 kg Equipment Digital Control Convection System Stainless Steel Interior 2 Insertion Grids Exhaust Connection Documentation available Work performed Scope of Supply Thermo Scientific Heratherm OMH180 2 Insertion Grids Documentation as shown in the pictures Condition Used Functional Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Pressure line 28 N / mm air pressure max. 4 bar Capacity of dye tub Becken - 1,3 Liter Klsdpfxju Dn Uvs Ab Iou Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2025, type of input current: AC, Grease filter, Filter King F 20 Hagesana Filter King TOP model: F 20 Tabletop unit Simple, robust technology! Stainless steel design 220V connection Used unit Ksdozfyptjpfx Ab Islu

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Kledpfx Ajzfqgieb Isu Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3151, Stainless Steel Heated Filtration System for Machining Center Capacity: 28 l Max. Operating Pressure: 16 bar Kjdpfowtga Rex Ab Islu Max. Operating Temperature: 95°C Grundfos (Pump): Type: MTR15-14/12A-W-A-HUUV n: 2924 rpm Hz: 50 kW: 11 Q: 17 m3/h Hmax: 169 m Grundfos (Motor): Type: MG160MB2-42FF300-H3 The Wolftechnik stainless steel filtration system, custom designed for the machining center WTBF85-F50-SS-TTV-GD-PN16, offers a high-quality solution for filtration in demanding manufacturing processes. Its heating capability ensures continuous operation even at low temperatures, preventing disruptions in production. With a high-performance Grundfos pump and a reliable motor, the system provides efficient flow control and continuous filtration.

Condition: good (used), Ride-on scrubber-dryer, scrubber-dryer, floor cleaning machine, mop, floor cleaner, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Air filter: Intake air filter -Type: unfortunately without a type designation -Inside/Outside: Ø 215/350 mm -Dimensions: Ø 350 x 605 mm Klodpfx Abszd Ac Te Iju -Weight: 6.1 kg

Condition: excellent (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Donaldson, Air filter type Duralife SMP 18-1046 Ovp -Number: 8 air filters included -Price: per piece Kodozd Ac Hjpfx Ab Iolu -Dimensions: Ø 282 x 420 mm -Weight: 2.9 kg/pc.

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon combination air filter, air filter housing -Part Number: 45 160 92 951 Kedpfxepyk Nus Ab Iolu -Inlet/Outlet: Ø 68/71 mm -Quantity: 24 combination air filters available -Price: per piece -Dimensions: 300/225/H305 mm -Weight: 2.5 kg/pc.

Condition: excellent (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: donaldson, Air filter type Duralife SMP 18 1045 Ovp -Number: 8 air filters included Kljdpfspyk Itex Ab Isu -Price: per piece -Packaging dimensions: 265/265/H280 mm -Weight: 1.8 kg/pc.

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Kodpfx Ajfzbqyjb Islu Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. Kledpfxjzdtflj Ab Iou The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Despatch laboratory oven. Despatch laboratory oven + 8” WAFER LCC: Maximum temperature 260 °C Lockable disconnect switch – turn off the control panel for easy maintenance Protocol 3 controller with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel interior with continuously welded interior seams on the insulation side to protect the working area from contamination Programmable door interlock prevents the operator from opening the oven door while the cycle is running The door interlock switch turns off the heating when the door is opened The recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic manometer monitors the pressure drop of the HEPA filter, so you know when the filter needs to be replaced Kjdpfx Aozdr Ekob Ielu Electric door release for ergonomic operation UL & C-UL listed control panel opens Modbus communication connection (RS485) for remote monitoring and recording Chamber dimension L 350 mm Chamber dimension W 350 mm Chamber dimension H 350 mm maximum temperature 260°C Digital display Yes Electrical connection 230 V Overall dimension L 830 mm Overall dimension W 910 mm Overall dimension H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Leybold Trivac oil-sealed vacuum pump. Leybold Trivac oil-sealed vacuum pump with exhaust filter. Leybold TRIVAC D 25 B oil-sealed vacuum pump. 2.5 x 10⁻³ mbar Pumping speed (50 Hz): 25.7 m³/h Pumping speed (60 Hz): 30.8 m³/h Exhaust filter with oil return ARS 16-25 Type: D 25 B Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) Kedpfxszdqq Ee Ab Ijlu We will gladly answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table Kjdpfjzdty Njx Ab Ijlu - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: like new (used), Max. 16 bar / Outlet pressure 0.5–10 bar Max. particle size: 25 µm Klsdpezdc H Hsfx Ab Iou Application: Compressed air systems Width: 45 mm Height: 190 mm Depth: 45 mm Weight: 341 g Condition: Like new

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman Dust Extraction System / Silo Dust Collector with Control Unit and Compressed Air Preparation Condition: Very good, commissioned in 2023 and operated for only 2 years until 2025; dismantled due to plant closure Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems Design: Compact steel construction with integrated filter module Filter cleaning: Pulse-jet compressed air cleaning Installation type: Roof-mounted on silo Typical use: Industrial dust extraction, bulk material handling, environmental technology Fan Manufacturer: Nederman Model: FMZ 620 Year of manufacture: 2023 Power: 3 kW Explosion-proof design Control Unit Manufacturer: Nederman Model: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure Vessel Manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Model: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum allowable pressure: 7 bar Permitted temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control Cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed Air Treatment: Camozzi MC202-D00 Max. input pressure: 16 bar Output pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB control/terminal box Version: Dust extraction system for silo applications with integrated filter unit and fan Accessories / Scope of delivery: - Electrical control cabinet with control system - Compressed air preparation unit with pressure gauge - Pressure vessel for pulse cleaning - Fan with motor - Pipe connection with weather protection grill - Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany Ksdpfx Ajyxvpfeb Islu