Used Four Column Press - Hydraulic for sale (31,202)

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec Njdedyynvepfx Agredb return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Number of strokes per minute: min./max.: 250 strokes/min. Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm Ndsdpfjfim Dwsx Agrob

Year of construction: 1999, condition: used, pressure 630 t passage width 1390 mm stroke 400 mm table surface area 1390x1250 mm total power requirement 75 kW Nsdpfx Aolp U R Segrjdb weight of the machine ca. 36 t dimensions of the machine ca. BxTxH 3200x2800x4000 mm

Condition: good (used), Table size: 350 x 350 mm. Ndodpfx Ajfm A Amsgrsb

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Ndsdpfx Agolyr Adorsb

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation Ndjdpfxew A Amre Agreb - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm Njdsx Uru Njpfx Agredb weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Ndjdpfx Agov Srfwereb Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm Ndjdpfoy Ec H Rex Agrjb ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Nodpoz Ari Tjfx Agrjdb Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Ndsdoy Uiyvepfx Agrsb Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm Njdpezf Ilcofx Agrodb length: 104cm weight: 1000kg.

Condition: used, Year of construction: 1982, Technical details: Nedpfx Ajrdlgiegrsdb pressure: 2,5 t

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Ndedpfeyz Dr Tox Agreb Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t drawing stroke 280 mm ejector stroke 240 mm Nsdpfxsvn U Sxe Agredb rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Ndedpfslc N R Djx Agrsb

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW Nedpfx Agozn H Rvorjdb - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Nodpfsg Iihwjx Agrodb Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Ndodelc N Ryspfx Agreb

Condition: good (used), Year of construction: 1981, machine/vehicle number: 027-006-20, Offer 26244 Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Stroke speed 200 mm/sec - Return speed 400 m/min - Installation height 800 mm - Overhang to center of ram 360 mm - Ram clamping surface 530 x 460 mm Njdoz A Axvjpfx Agredb - Ram clamping pin 40 mm - Table size 750 x 560 mm - Table bore / through hole 180 mm - Table height above floor 700 mm - Oil capacity (approx.) 300 l - Drive 380 V / 11 kW - Space requirement (approx.) W 1150 x H 3100 x D 1750 mm - Weight (approx.) 4300 kg

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Ndedod Ih Nrjpfx Agrsb Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine Nedpfx Agsh Uhqyorjdb - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 Ndedper I E Itofx Agreb - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Nodpfx Ajd E U Nnogredb Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: used, Year of construction: 1971, pressure 200 t Ndsdpfx Ajt Hw Dwogrob passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration