Used Gec Diesel Ltd Generator for sale (18,449)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5102, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 190 l, color: grey-black, power: 88 kW (119.65 HP), output current: 160 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, total length: 2,675 mm, total width: 1,125 mm, total height: 1,645 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT Iveco NEF45TM2A, type of cooling: water, Equipment: CE marking, ESP: 88 kW / 110 kVA PRP: 80 kW / 100 kVA Engine: FPT Iveco NEF45TM2A Emission level: stage II Speed: 1,500 rpm Electronic speed controller Pedpoxy Iqzefx Al Sepr Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (190 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4877, overall weight: 1,050 kg, fuel type: diesel, tank capacity: 130 l, color: grey-black, power: 30.4 kW (41.33 HP), output current: 63 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, total length: 2,370 mm, total width: 1,120 mm, total height: 1,570 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins X3.3G1, type of cooling: water, Equipment: CE marking, PRP power: 28 kW / 35 kVA ESP power: 30,4 kW / 38 kVA Engine: Cummins X3.3G1 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (130 L) and vibration dampers •Coolant preheating Ppodpfoxyxvzsx Al Sjr •With integrated ATS switch •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5027, overall weight: 5,540 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 528 kW (717.88 HP), output current: 1,000 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 480 kW (652.62 HP), nominal power (apparent): 600 kVA, total length: 5,015 mm, total width: 1,710 mm, total height: 2,725 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 8M21G660/5, type of cooling: water, Equipment: CE marking, PRP power: 480 kW / 600 kVA ESP power: 528 kW / 660 kVA Engine: Baudouin 8M21G660/5 Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof Ppedpfexyxcnex Al Sjr •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5091, overall weight: 6,390 kg, fuel type: diesel, tank capacity: 990 l, color: grey, power: 660 kW (897.35 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 600 kW (815.77 HP), nominal power (apparent): 750 kVA, total length: 5,240 mm, total width: 1,700 mm, total height: 2,720 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 6M33G825/5, type of cooling: water, Equipment: CE marking, PRP power: 600 kW / 750 kVA ESP power: 660 kW / 825 kVA Engine: Baudouin 6M33G825/5 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Ppsdpfx Asxywtfel Ssr Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (990 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Year of construction: 2013, condition: used, Production country: IT Pedpfew Nyrkox Al Sepr Please contact Christiaan Dekker for more information Fastverdini Floor Saw Lombardini diesel engine 2013

Condition: used, Year of construction: 2025, machine/vehicle number: K24I440352, fuel type: diesel, motor manufacturer: Cummins, Field of application: Construction Pedpfx Alsv Uhrfj Sopr Transport dimensions (LxWxH): 0x0x0 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023,

Condition: used, F J Edwards Ltd Sheet Metal Bender, Max Material Width 1850mm, Cast Iron Construction Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Podey H Ifnjpfx Al Sepr

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021201. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Ppodpey Hlvwsfx Al Sjr Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021202. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Psdsy Hlkbspfx Al Sepr Condition – Not operational, out of action 3-4 months.

Year of construction: 2023, condition: excellent (used), Weighing and Bagging System Year: 2023 Comprising of: - Ppjdpfx Aloy Exfvs Sjr 1 x Incline Conveyor, approx. 5m height Gantry 1 x 14 Head Multihead Weigher, dimple pan 1 x Vertical Form, fill and seal bagger, Model: X500 (was packing 180g bags of Mangetaut) 1 x Checkweigher *Lots of videos available*

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Psdpfx Aoxfrv Esl Sspr Coevorden, Netherlands

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Pjdsu Tg I Dopfx Al Sjpr Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Podpfx Ajynrzbel Sepr Condition: Good Available: Immediately

Condition: good (used), Year of construction: 2007, Controller: R-J3iB Number of axes: 6 Max. payload: 3 kg Reach: approx. 700 mm Scope of delivery: Robot, controller, cables, touch panel, operating manual On request, transport and loading can be organized Europe-wide for an additional fee. Prices plus VAT Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? Ppodpfoy H Ihcjx Al Sjr For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2004, For sale are 3 identical LR Mate 200iB 3L robots Controller: R-J3iB Number of axes: 6 Max. payload: 3 kg Reach: approx. 700 mm Scope of delivery: Robot, controller, cables, touch panel, operating manual Transport and loading can be organized Europe-wide at extra cost upon request. All prices plus VAT. Podpfx Aley H Ig Es Sopr Viewing by appointment possible. Contact us – our team looks forward to assisting you. Machine Purchase / Sale BUY / SELL OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use our contact form.

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm Podpfx Alowgitts Sspr max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. Pedpfjy Au Arjx Al Sopr *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Ppsdpfxoy Av Rdo Al Ssr Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Condition: like new (used), Year of construction: 2025, functionality: fully functional, briquette diameter: 50 mm, overall weight: 340 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 60 l, pressing force: 8 t, operating pressure: 270 bar, Equipment: cooling unit, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 20-30 kg/hour. The raw material hopper is 50 liter, and has a level sensor. The machine has an oil cooler for the continous work. Psdpfx Aljf Hmi Eo Sepr

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 345117, Magic-Skin 5035EV semi-automatic skin packaging machine. Board size 495mm x 345mm. Maximum product height 100mm. Timers control dwell time, heating time and vacuum time, incorporates self contained vacuum pump. Fitted with infeed/discharge tables and supplied free-standing with 4 castors 2 locking castors. (Paint colour blue) Ppodsywu Hgspfx Al Sor Power requirement: 230V, single phase 3 pin blue 16 amp Overall dimensions (lxwxh) 1810x965x1450mm

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Psdpfx Asxdc Ehol Sepr

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PCM 200, total length: 1,650 mm, total width: 800 mm, total height: 1,900 mm, warranty duration: 12 months, type of input current: three-phase, power: 225 kW (305.91 HP), Hot air Pork crackling machine Podpfxoy Ex Eie Al Sjpr Here is the introduction of our pork crackling machine, as follows: Our pork crackling machine is produced from high quality AISI 304 stainless steel. The machine consists of stainless steel body, including inner drum with holes, which allow moderate distribution of hot air and even baking of the product. The operator may choose the time and frequency of the drum rotation with the help of the Frequency regulator and the German company Aditec control. The drum rotation can be according to the product types and time frequency control of the motor speed. The machine is wrapped with insulation, which fully ensure the safety of the operation of the workers, prevent burns. Our Pork crackling machine save manpower, reduce production cost, has easy paddle discharge system, perfect heating system, reliable electric control system, etc. This pork crackling machine is a new type of energy-saving equipment that our company has developed for the characteristics of this type of the products. This is our pork crackling machine introduction, if you want to know more information about the pork crackling machine, feel free to contact with me.

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a Kim Ho Sheng Industrial Co Ltd rubber and plastic open mixing mill, model ROLL 16x42'' L, manufactured in 1978. The machine features two large metal rollers designed for mixing rubber and plastic materials. It is equipped with a substantial exhaust hood and duct system positioned above the rollers to provide ventilation during operation. Control handles are located on both sides of the machine, allowing for manual adjustments and operation. This mixing mill is suitable for industrial rubber and plastic processing applications where open mixing mills are required. Podpjyqyb Usfx Al Sepr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Belt Fryer Brand Technoinvest Engineering Ltd Model FML-3M Number: 350 Year of construction: 2008 Mesh belt with partitions Belt width: 680 mm Distance between partitions: 200 mm Band height: 40 mm Pjdpfowatvrox Al Sopr Overall dimensions: 9800 mm x 1500 mm x 2350 mm