Used Geka Bendicrop 85 S for sale (70,601)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,218 h, load capacity: 227 kg, lifting height: 27,900 mm, fuel type: diesel, Note: Batteries not properly secured Njdpfxjyiyxds Ag Dela

Condition: new, Year of construction: 2026, Genie S-85 XC FE hybrid all-wheel-drive telescopic boom lift, new, used, demonstration machines available Nedpfswmcg Tex Ag Dola

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,684 h, load capacity: 454 kg, lifting height: 25,900 mm, fuel type: diesel, color: blue, Note: Basket slightly tilted Nlodpfxsyc Rnpj Ag Dea

Condition: used, Year of construction: 2015, operating hours: 2,511 h, Equipment: all wheel drive, Genie S-85 Telescopic Boom Lift, WH 28 m * Working height: 28 m Nljdpfxjyq Aize Ag Dea * Platform height: 26 m * Horizontal outreach: 23.3 m * Telescopic steel construction * Powered by 4-cylinder Deutz diesel engine * Hour meter reading: 2,511 (read off) * Year of manufacture: 2015 * 4x4 all-wheel drive * 2 driving speeds * Tire size: 18-625NHS * Tread depth: 16-19 mm * Wheelbase: 2,700 mm * Drive configuration: 4x4 * Overall dimensions: 12,050 x 2,500 x 2,850 mm * Weight: 16,842 kg * Basket load capacity: 227 kg * Rotating basket * Hydraulic jib: 1,420 mm * Basket of steel construction * Basket dimensions (L x W x H): 1,560 x 680 x 1,100 mm * Basket and ground controls Further information and additional photos available on request. This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all details. Visit our website as well.

Condition: used, Year of construction: 2005, operating hours: 7,017 h, Equipment: all wheel drive, Telescopic Work Platform Genie S-85, WH 28 m * Working height: 28 m * Platform height: 26 m * Lateral outreach: 23.3 m * Telescopic steel construction * Powered by 4-cylinder Deutz diesel engine * Hour meter reading: 7017 (read) * Year of manufacture: 2005 * 4x4 all-wheel drive * 2 drive modes * Tyre size: 385/65x22.5 * Tread depth: 7–20 mm * Wheelbase: 2700 mm * Drive configuration: 4x4 * Overall dimensions: 12,200 x 2,470 x 2,770 mm * Weight: 16,954 kg * Platform load: 227 kg * Rotating platform basket * Hydraulic jib: 1,420 mm * Chassis width adjustment: 3,050 mm Nljdpfxsyq Ag Ts Ag Dsa * Steel platform basket construction * Platform basket dimensions (L x W x H): 2,160 x 820 x 1,100 mm * Basket and ground controls Further data and more photos available on request. This description does not represent a binding offer and may contain errors. No guarantee for all details. Please also visit our website.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,584 h, load capacity: 454 kg, lifting height: 25,900 mm, fuel type: diesel, The basket control sometimes does not respond when slewing. Nodpfx Ajx Tdl Djg Dela

Condition: new, Year of construction: 2024, Genie S85XC diesel all-wheel telescopic boom lift, new, used, demonstration machines available Nsdpfjvm U S Ajx Ag Djla

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,386 h, load capacity: 454 kg, lifting height: 25,900 mm, fuel type: diesel,

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 4,285 h, machine/vehicle number: S8007-6057, mast type: telescopic, lifting height: 25,900 mm, lifting power: 227 kg/m, overall weight: 16,375 kg, transport length: 12,400 mm, transport width: 2,440 mm, transport height: 2,790 mm, next inspection (TÜV): 08/2026, fuel type: diesel, tire condition: 60 %, Neatly used aerial work platform, in excellent condition. Fully inspected, maintenance record available. Fitted with a new engine (09-22). Current hours on the new engine are approximately 250 hours. We are selling this machine because it is too small for our requirements. Nodpfx Aoxnqc Nsg Dela

Condition: used, Year of construction: 2011, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Nledpfx Agjwc Smbs Dea Weights Empty weight: 17.584 kg Functional Lifting capacity: 227 kg Working height: 2.770 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 257000 m Transport dimensions (LxWxH): 10,5x2,36x2,75 Production country: US Additional information Please contact Christian Theißen for more information

Condition: used, mileage: 15,244 km, power: 48 kW (65.26 HP), first registration: 01/2003, overall weight: 2,800 kg, fuel type: gasoline, color: white, axle configuration: 4x4, maximum load weight: 1,560 kg, empty load weight: 1,240 kg, tire size: 175/75R14, wheelbase: 2,150 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, loading space width: 1,330 mm, loading space length: 1,880 mm, loading space height: 350 mm, total length: 1,400 mm, total width: 1,800 mm, number of seats: 2, Equipment: all wheel drive, cabin, Vehicle location: Bovenden, aluminum body, Kz. house, switch 4, rotating beacon, leaf suspension Wheelbase: 2150 mm Body: Winter service equipment with spreader New clutch, snow blade possible for an extra charge of EUR 1,000! 4-cylinder Daihatsu engine Vehicle is in need of repair! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nlsdpfsvhhc Dox Ag Doa - .

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW working width 140 mm Feed below consists of: conveyor belt 8800 x 60 mm bottom conveyor belt 8800 x 40 mm for stem Top feed consists of: Conveyor belt 7140 x 40 mm top Aggregates: Nsdjiw D T Iepfx Ag Dsla pos. 1 - scoring unit 2,2 kW 3000 rpm. pos. 2 - milling unit 3 kW 6000 rpm. pos. 3 - milling unit 5,5 kW 6000 rpm. pos. 5 - belt grinding unit 2,2 kW 120 x 2060 pos. 8 - belt grinding unit 2,2 kW 120 x 2060 / frame grinding belt pos. 4, 6, 7, 9 - profile and edge breaking units Suction connection pieces 5x100 mm, 1x120 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Nljdpfjw Imq Rsx Ag Dja

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Nlsdpoudbzyefx Ag Dsa Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Nlodpfxoyk H E Te Ag Dea Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Condition: used, functionality: fully functional, Year of construction: 1997, Geka ETS 300 Year of manufacture: 1997 Capacity: 3000x1.5mm for St37 Left-hand sheet stop Nsdpfxjywdzmo Ag Dola Manual rear gauge up to 700mm 380 Volt Foot switch Dimensions approx. (in mm): 3650x2000x1400 Weight approx. 2200kg

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Nlsdpsyy U Shefx Ag Dja Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, controller manufacturer: GEKA, stroke rate (min.): 37 1/min, stroke adjustment: 60 mm, throat depth: 500 mm, punching force: 55 t, punching diameter: 100 mm, cutting range flat at 45° (X-axis): 300 mm, working height: 1,085 mm, oil tank capacity: 80 l, overall weight: 1,750 kg, total length: 2,100 mm, total width: 1,160 mm, total height: 2,090 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, notching unit, GEKA HYDRACROP 55 SD – Universal Ironworker | 360° | Ø100 mm Bending Station For sale: professional dual-cylinder universal ironworker from the renowned Spanish manufacturer GEKA, model Hydracrop 55 SD. The machine is in excellent technical condition, ready for immediate operation in demanding industrial environments. WHAT SETS THIS UNIT APART? Full 360° Mobility: The machine is mounted on a special rotary bearing, enabling complete 360-degree rotation. This feature is invaluable for processing long flat bars or profiles in smaller workshops. SD Version (Extended): The throat depth is an impressive 500 mm, allowing work with very wide sheet metal panels. Extreme Punching: The machine is equipped with an attachment for punching holes up to Ø100 mm. Additional Bending Station: Includes a professional flat bar bending station, making this machine a versatile metalworking center. TECHNICAL DATA: - Punching force: 55 tons (550 kN) Nsdpsyricdofx Ag Dela - Number of cylinders: 2 (enabling operation by two users at different stations simultaneously) - Number of workstations: 5 (punching, angle shearing, flat bar shearing, round/square bar shearing, notching) - Max. sheet thickness: 20 mm - Angle cutting at 90°: 120 x 120 x 10 mm - Motor power: 5 kW - Stroke rate: 37/min - Weight: approx. 1,750 kg EQUIPMENT & BENEFITS: - Control system: Intuitive foot pedal control with “Touch & Cut” function (electric back gauge) - Safety: Emergency stop, full CE marking, and complete technical documentation (DTR) - Condition: Well-maintained machine, regularly serviced, with all measurements and operating parameters perfect.

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 15600 € 299.52 € 55 to 750 mm 40x10 mm 37 1/min 5 kW 1930 mm 1200 mm 1800 mm 1885 kg hydr. drive Nlodpjwirfwefx Ag Dea Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 35600 € 679.96 € 110 to Njdpfx Aeynmrbjg Dola 610 mm 5 40/20 bzw. 28/28 mm 80 mm 28 1/min 600x15 / 400x20 mm 152x152x13 mm 50 mm 13x52x90 mm 9 kW 2690 mm 1400 mm 2200 mm 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien Nodpfxjynmq Ro Ag Dela 72800 € 1375.92 € 165 to 610 mm 5 40/30 bzw. 34/34 mm 110 mm 31 1/min 750x20 / 400x30 mm 205x205x18 mm 60 mm 16x58x110 mm 15 kW 2950 mm 1600 mm 2200 mm 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION "KIT" € 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 165 series: model S € 55.200,-- as model SD but 510 mm gap weight 5.200 kg (sample photos) WE HAVE MORE THAN 700 REFERENCES!

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. Nljdpfx Agsyhd D Is Doa - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: good (used), Technical data for the pallet rack upright: Shelf system: Hovuma The scope of delivery includes: 01x pallet rack upright, used Material color: cream white profile dim.: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Nljdpfxjkwdd Es Ag Dja Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep

Condition: good (used), We offer here a used rear wall grille holder for sale. Included in delivery are: 01x holder f. rear wall grille, used material colour: sendzimir galvanized dimension leg A: approx. 115 x 85 mm dimension leg B: approx. 50 x 85 mm distance back wall grid: approx. 85 mm oblong hole dim.: approx. 21 x 10 mm distance center-center-hole: approx. 50 mm Weight/piece: approx. 0,403 kg Nlsdpfsgyfxpjx Ag Dsa Shipping costs on request

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Nlodomig D Dspfx Ag Doa