Used Gmeiner Streuer Yeti 1800 Fs for sale (3,535)

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Nwedpfx Ajfy Am Uebzoi

Condition: used, Year of construction: 2018, operating hours: 5,690 h, mileage: 89,600 km, power: 55 kW (74.78 HP), empty load weight: 15,000 kg, Operating hours: 5,690, First registration: 23.02.2018 Nwsdpfju Ay Tzox Abzei Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic equipment VT 651 Exhaust air blower: Control speed variable between 2,400 rpm and 3,500 rpm, suitable for the respective application. Driven by the auxiliary engine via the reduction gearbox and fluid coupling. Gearbox ratio: 1.79:1 Disc brushes: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction nozzle: Cast aluminum suction nozzle with a 250 mm inlet opening and tool-free adjustment. Sweeping roller: Quick-release brush system with a nominal rotational speed of 160 rpm. Dust suppression system: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and at the vehicle front. Pressadrain water expulsion system. Electrical system: 24 volts. All external wiring harness connections rated to automotive standard IP67. Controls: Main control panel centrally mounted in the cab with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows download of recorded data. Up to four cameras (optional accessories) can also be monitored on the JVM screen. A separate palm-rest control includes controls for main sweeping functions and is mounted on the door side. Superstructure and hood: The superstructure consists of the debris container and the integrated water tank, manufactured from high-performance stainless steel sheet. The hood is lined with frequency-adaptive sound-absorbing material. The water tank is equipped with baffle plates and filled via a hydrant filling port type "A". A dual, dry-run-protected diaphragm pump runs continuously. Watertight rear door with double locking system and drainage function. Two side access doors on the superstructure. Insertable superstructure floor as a transfer port for use as a street washer. Rear discharge chute, double amber beacons at the rear protected by wire cages. Automatic multi-positional body support mechanism and side-mounted storage compartments as standard features. Special features: - Special painting LA1 2603 deep orange - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from cab - Manual water valves in cab Optional equipment: - Side underrun protection left - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: 54595 Prüm

Condition: used, Year of construction: 2023, operating hours: 893 h, power: 62 kW (84.30 HP), empty load weight: 4,500 kg, Operating hours: 893, First registration: 29/09/2023 Sweeper Bucher C202 Euro 6C with VM engine, Euro 6C certified, featuring integrated diesel particulate filter, SCR catalyst, and AdBlue. Standard configuration with 2 side brushes, front steering (2-wheel steered), speed 50 km/h. Equipment: - Right-hand drive - All-wheel steering – offers high maneuverability and safety - RAL 9016 white - Rotatable 125 mm leaf suction hose - Coarse dirt / leaf flap - Prepared for 3rd front brush and/or winter service equipment (right-hand drive) without front equipment triangle - Includes work lights - Additional mirror inside the cab to improve blind spot visibility Nwsdpfx Asw Ehxxsbzsi - Protective grid on cab floor - Exterior mirrors, heated - Rear view camera, color - DAB+ radio with CD, USB, Bluetooth - Deluxe driver’s seat with headrest, lumbar support, and seat heating - Automatic climate control – fully integrated heating and air conditioning system - Electric battery master switch - LED beacons in front, behind the cab - LED warning flashers, front (2 pcs) - Manual water valves for the brush arms - High-pressure system 68 bar, 9 l/min with 10 m hose and hand lance - Water level / water loss indicator for fresh water - Label 99dB Location: State Office for Fire-

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm Nwedpfx Ajtuzqpjbzei

Condition: used, Year of construction: 2022, operating hours: 1,018 h, power: 62 kW (84.30 HP), color: white, empty load weight: 3,500 kg, Operating hours: 1018, Engine manufacturer: VM-Motor, First registration: 28.09.2023 Equipment: Sweeper vehicle Bucher-Johnston CX 202 Euro 6 VM engine, Euro 6 certified with integrated diesel particulate filter, SCR catalyst, and AdBlue Standard configuration 2 side brushes, front steering (2-wheel steering) Special equipment: Right-hand drive, RAL9016 white Coarse dirt/leaf flap Shut-off valve for return water from the debris container Air conditioning, CFC-free Large brush mirror for improved visibility of the sweeping area digital tachograph Heated exterior mirrors Radio DAB+ with CD (brand: Alpine, model: CDE-205DAB), MP3, front AUX, USB, Bluetooth, microphone Deluxe driver’s seat with headrest incl. seat heating 50 km/h LED warning beacon at the front behind the cab Manual water valves for the brush arms Storage location: ESO City Services Nsdpfouqtfljx Abzjwi

Condition: used, Year of construction: 2016, operating hours: 3,656 h, fuel type: diesel, color: white, empty load weight: 4,000 kg, next inspection (TÜV): 08/2020, front tire size: 0%, rear tire size: 0%, Operating hours: 3656, first registered: March 22, 2016, self-propelled_____Equipment: - Right-hand drive - All-wheel steering (turning circle diameter 3760 mm) - Coarse dirt flap - Poly/steel brushes (instead of standard) - Suction nozzle with castors (instead of standard) - Mounting plate: preparation for 3rd brush - Low water level indicator - Adjustable water valves on the front brushes - Deluxe driver's seat, heated with lumbar support - Radio extension with Bluetooth (hands-free phone) - Blind spot mirror - Heated rear view mirror left/right - Additional 99 dB (A) TÜV approval - Rear view camera system with integrated 7.0" color monitor - RKL, foldable, yellow LED (instead of standard) - High work lights, Storage location: 54595 Prüm Nwjdpolz Iu Usfx Abzei

Condition: used, Year of construction: 2022, operating hours: 1,250 h, mileage: 27,235 km, empty load weight: 16,000 kg, Operating hours: 1250, First registration: 24.02.2023 Application: - Maximum gross weight: 16 t - Prepared for sweeper body Main components: - Chassis height: MED (medium) - Standard cab - Wheelbase: 3350 mm - Euro 6 emission standard - Diesel engine, 6 cylinders, 7.7 l, 257 hp / 188 kW, 969 Nm - Exhaust and compression brake, 170 kW / 231 hp - Transmission ZTO1006, 6-speed manual (OD) - Drive axle ratio: 5.13 Equipment packages: - Manual roof hatch - Side sun visor, driver side - Manual air conditioning - Cruise control - DAB audio system, DAB/FM/AM radio, antenna, Bluetooth connectivity, USB, 2 speakers Chassis: - Technical max. front axle load: 5.8 t - Technical max. rear axle load: 10.9 t - AdBlue tank: 32 liters Wheels and tires: - Front tires: 285/70 R 19.5 Goodyear KMAX S - Rear tires: 285/70 R 19.5 Goodyear KMAX D Drivetrain – equipment: - High-level air intake, installed on bracket right behind cab Cab interior: - Right-hand drive - Heated comfort driver's seat with integrated seatbelt - Basic passenger seat - One armrest for driver - Coat hook on rear wall - Forward collision warning with emergency braking (for stationary and moving objects) - Lane departure warning system - Immobiliser, transponder in key - Electric windows on both sides - Reverse alarm - Speed limiter 90 km/h - Metal roof hatch - Steering wheel adjustable in two directions Cab exterior: - Tinted windows - Rear cab wall window - Central locking with remote control - Heated and electrically adjustable rearview mirrors - External sun visor - Headlights with beam adjustment - LED daytime running lights, "V Light" Double-sided dirt intake Body with hydrostatic drive and hydraulic auxiliary drive with HGB2 transmission (V50h/V65h) Engine power: 256 hp / 188 kW (187.9 kW) Application: - Maximum gross weight: 16 t - Sweeper preparation - Diesel engine, 6 cylinders, 7.7 l, 969 Nm - Exhaust and compression brake, 170 kW / 231 hp - Bluetooth phone integration, USB, 2 speakers - Technical max. front axle load: 5.8 t - Technical max. rear axle load: 10.9 t - Collision warning with emergency braking (stationary and moving obstacles) - External sun visor - LED daytime running lights, "V Light" Standard basic equipment: - Hydrostatic gearbox HGB2 - Max. 1400 Nm and approx. 340 hp Njdpfx Ajvt Iytjbzjwi - Mechanically switching gearbox integrated into chassis with built-in hydrostat for stepless speed control in sweeping mode - Transport speed 0 - 85 km/h via standard transmission (cruise control optional) - This work drive allows stepless control of sweeping speed forward (1 - 40 km/h) and reverse (1 - 10 km/h) via electronic accelerator pedal (Easy-Drive) - Suction power can be regulated independently of travel speed between ECO and MAX - Fuel tank in sweeper body, approx. 190 l capacity - Hydraulic fan drive - Hydraulic oil tank 50 l - Engine compartment fitted with sound insulation - Fan exhaust routing upwards through container superstructure - Stepless electronic tur...

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, overall weight: 12,000 kg, mileage: 1,001 km, empty load weight: 1,720 kg, maximum load weight: 10,280 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Top-mounted salt spreader Epoke Sirius SH3500 approx. 3m³ Dismantling of Daimler-Benz 1617C 4x2! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Nwodpfju Hqlvex Abzsi

Condition: used, Year of construction: 2022, operating hours: 1,249 h, mileage: 9,200 km, empty load weight: 16,000 kg, Operating hours: 1249, Initial registration: 03/13/2023_____Engine power: 256 hp / 188 kW (187.9 kW)Application: Maximum total weight 16 t - Sweeper unit preparationMain components:- Standard cab- Wheelbase 3350 mm- Euro 6 emission standard- Diesel engine, 6 cylinders, 7.7 l, 969 Nm- Exhaust and compression brake, 170 kW/231 hp- Transmission ZTO1006, 6-speed manual, overdrive- Drive axle ratio 5.13Equipment packages:- Manual sunroof- Side sun visor, driver's side- Manual air conditioning- Cruise control- Audio system DAB, radio DAB/FM/MW, antenna, Bluetooth telephone connection, USB, 2 speakersChassis:- Front axle load (technical) max. 5.8 t- Rear axle load (technical) max. 10.9 t- AdBlue tank 32 litersWheels and tires:- Front tires, 285/70 R 19.5- Goodyear, KMAX S- Rear tires, 285/70 R 19.5- Goodyear, KMAX DDrive train - Equipment:- High air intake, mounted on bracket on the right side behind the cabCab - Interior:- Right-hand drive- Comfort driver's seat, heated, seatbelt integrated in the seat- Basic passenger seat- One armrest, driver's side- Coat hook on the rear wall- Collision warning with emergency braking function (stationary and moving objects)- Lane keeping system/lane departure warning- Immobilizer, transponder in the key- Electric windows on both sides- Reversing alarm- Speed limiter 90 km/h- Metal sunroof- Steering wheel, adjustable in two directionsCab - Exterior:- Tinted windows- Window in the rear wall of the cab- Central locking with remote control- Rear-view mirrors, heated and electrically adjustable- Exterior sun visor- Headlights with beam angle adjustment- Daytime running lights LED, "V light"Standard features:Hydrostatic transmission HGB2Max. 1400 Nm and approx. 340 hpMechanical transmission integrated into the chassis with integrated hydrostatic system for stepless speed control during sweeping operationTransport speed 0 - 85 km/h via standard transmission (cruise control optional)This working unit allows stepless control of the sweeping speed forward (1 - 40 km/h) and backward (1-10 km/h) via an electronic accelerator pedal (Easy-Drive).At the same time, the suction power can be regulated independently of the driving speed between ECO and Max. Fuel tank in the sweeping superstructure, capacity approx. 190 lHydraulic fan drive. Hydraulic oil tank 50 l, engine compartment with noise-reducing material, fan exhaust duct leading upwards through the container extension, stepless electronic turbine adjustment, hydraulic pump, single.Sweeping material container:Sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel. Sweeping material container gross volume 6.5 m³, sweeping material container floor made of chromium-nickel stainless steel 1.4301. Sweeping material container tilting angle approx. 55 degrees, dirt slide made of chromium steel 1.4003, inspection flap on the right and leftDirty water drain via clamp hose and 2" drain valve, air guide screen, manually foldable, 2 flashing beacons orange, rear on the sweeping material container, suction pipe flap on the outside of the container, hydraulically operated, 4-stage locking support, pneumatically operated.Marker lights on the rear of the container, side marker lights.Sweeping unit: Nwjdpfxjvacl De Abzoi

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Required scope of delivery for the push-through safety device: 1x U-profile, used Material color: cream white Overall length: approx. 1,870 mm Profile dimension: U: 60 x 45 mm Material thickness: approx. 4.00 mm Weight/piece: approx. 9.57 kg including 2 swivel clasps Number of hooks: 4 hooks (hooks per clasp) 2x Locking pins, used Material color: Sendzimir galvanized Additional information: Racking system: Vogelsang Nwjdpjhh Hu Uofx Abzei Type: NS suitable for clear width: approx. 1,800 mm Overhang: approx. 65 mm Two original clasps are attached to the U-profile. With the help of these, the push-through safety device is hung into the upright and fixed with locking pins. The images regarding the assembly of the push-through safety device serve only to illustrate the material. The material colors may differ. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Year of construction: 2022, operating hours: 2,539 h, power: 118 kW (160.44 HP), color: orange, empty load weight: 10,500 kg, Operating hours: 2539, First registration: 03/06/2023. Basic equipment CityCat 500. Driver's cab: Comfortable cab, mounted on hydraulic bearings, with sound insulation. Windshield made of heat-insulating, curved, low-reflection safety glass. 2 sliding windows in each door. Multi-stage heating fan. Sun visor. Windshield wiper with washer system. Air-suspended driver's seat and sprung passenger seat, both individually adjustable. Adjustable steering column (angle and height). Clearly arranged and ergonomically positioned control and monitoring instruments with a 7'' color display. Visual and acoustic warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Steering: Hydrostatic four-wheel steering with hydraulic power assistance. Axles: Rear axle as a steering drive axle with differential. Front axle with coil springs and shock absorbers. Hydraulics: The latest electronic control concept enables optimized fuel and noise-efficient control of the diesel engine for hydrostatic drive over the entire speed range. This is achieved without any loss of performance. Brakes: Hydraulic dual-circuit brake system with hydraulic power assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on rear axle. 4 brake calipers in the front and 2 in the rear. Sweeper intake: Suction principle, with a drawn, stainless steel suction nozzle in front of the axle, together with side brushes that can be hydraulically shifted laterally by 400 mm. Infinitely adjustable high-performance suction fan. Sweeper container: Container volume 5.6 m³, hydraulically tilting and locking. Tilting height 930 mm. Tilting height (high tilting) 1550 mm (optional). Tilting width 1700 mm. Tilting angle 51°. Water system: Water tank approx. 880 l. One water pump for water nozzles. Sweeper brushes: 2 sweeper brushes, left and right, Ø 900 mm, infinitely adjustable speed 0-150 rpm, with start-up protection. Special equipment: - Color standard RAL 2011 orange. - Hydraulic suction nozzle flap. - Leaf grate. - Lifting device for raising and lowering the leaf grate in the sweeper body using a hydraulic hand pump. - Easyclean, quick cleaning system for cleaning the sweeper body side walls, fan, recovery system, and leaf grate. - 3rd front brush in reinforced design with linear displacement, tilt adjustment in both directions, load pressure regulation, greater reach, greater sweeping area. - Leaf suction hose, mounted on the side, length 3.5 m, ø 160 mm, can be mounted on either side. - Air conditioning, fully integrated, CFC-free. - Wide-angle mirror and main mirror, heated and electrically adjustable. - Additional side brush mirror on the right. - Rear view camera and suction nozzle camera. - Cruise control, improves work ergonomics, increases work performance. - Deluxe ISRI driver's seat with headrest and weight adjustment via control valve. - Rotating beacon in LED design on the cab. Mounted on the cab with an elastic bracket, can be folded down in case of obstacles. - Rotating beacon in LED design at the rear of the sweeper body. Mounted with an elastic bracket, can be folded down in case of obstacles. - Work lights, left and right brush, LED spotlight for suction nozzle, LED joystick exchange, front/side brush enables the exchange of the joysticks. - Water connection with spray nozzle. Njdpfx Absi Haqhjzswi

Condition: used, diameter div. Nwsdpfx Abowtrzyszsi number 56x tool adaptor BT 40

Year of construction: 2011, condition: excellent (used), Pallet inverter, pallet changer, pallet turner Gives the possibility to turn pallets with load and to replace the pallet. f. i. from wooden pallets to plastic pallets, or to change broken pallets under a pile of goods, without unstaple and staple by hand. Nodpfsgyk Uhjx Abzjwi

Condition: new, * IMMEDIATELY AVAILABLE * Including 2x sales hatches, entrance door, 100 km/h approval, 4 support legs TECHNICAL DATA • Brand: Blyss • Model: H18422HN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • TÜV/MOT: 2 years new from first registration • 2 years from first registration • Internal dimensions (LxWxH): 420 x 223 x 230 cm • External dimensions (LxWxH): 583 x 239 x 277 cm • Loading height: 55 cm • Perm. total weight: 1,800 kg • Unladen weight: 780 kg • Payload: 1,020 kg • Chassis: Low loader (wheels mounted beside the body) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized by immersion • Single axle • Multiplex flooring • Sidewalls made of sturdy 25 mm GFRP sandwich panels • Sales hatch on right side • PVC flooring • Additional sales hatch at rear • Front wall door, lockable from inside and outside • Non-slip platform on drawbar • Jockey wheel with clamp • 4x scissor support legs mounted incl. crank handle • Maintenance-free KNOTT rubber torsion axles • Automatic reversing function • KNOTT overrun brake system and parking brake • Plastic mudguards • 13-pin connector • Reversing lights • High-capacity safety lighting • Integrated rear fog light New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration documents can be sent in advance or temporary transit plates (Germany) can be provided. - Export plates with customs clearance available Nsdpfx Asyacgxjbzjwi Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available in stock! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealers & service workshop for over 30 years. - Subject to errors, prior sale, and alterations -

Condition: new, empty load weight: 870 kg, maximum load weight: 930 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, loading space volume: 18 m³, tire size: 165r13c, Sales trailer, robust and high-quality, designed for food service or merchandise. The SELLER food service trailers are manufactured with an insulated sandwich panel construction. The extremely stable steel frame is welded and hot-dip galvanized, ensuring high stability. The flap and entrance door have a welded frame, ensuring the sales unit remains permanently stable. A lockable steel door, not made of plastic, is installed in the door. The trailer body, made of 30mm sandwich panels, has a galvanized outer shell that is powder-coated. The insulation consists of a foamed PUR core. The trailer is silver-grey on the outside and white on the inside. Four adjustable supports provide stable support for the food service trailer. Therefore, it is an affordable trailer for markets, food service, non-food items, street food, cocktails, fast food, and other merchandise. Financing: Available WITHOUT a down payment!!! You can find other sizes, configurations, and more affordable models in our shop: ----- You can also find all our cost-effective offers on our website. Germany-wide delivery possible (except to islands)! Please ask us for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr bei Bremen Tel: 0 Fax: Njdpod U Itwjfx Abzowi Pick-up times: Monday - Friday – Saturday pick-up is not possible!

Condition: used, functionality: fully functional, VIFESA KMV-1800 - Industrial Mixer/Dispenser Equipment in excellent condition, ready for operation! (see attached photos) Key features: Model: Vifesa KMV-1800 Nominal capacity of 1800 liters Large-volume yellow hopper in excellent condition Robust white metal frame with chain-operated lifting system Complete motor and mechanical system Original VIFESA electrical panel Nwsdpfezcwm Sjx Abzei Ideal for mixing concrete, mortars, chemicals, additives, feed, or other bulk materials Condition: Used, but very well maintained. Fully functional. Shows normal signs of use (dirt and work marks), but with no cracks or structural defects.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Please find below the details regarding the equipment available for sale: ARISA 400-ton Mechanical Press (S-2-400-160-FS) + DIMECO Feeder Line – Year 2001 Nodpozpz U Sjfx Abzowi Description: Complete ARISA 400-ton mechanical press for cutting/forming, with its automatic DIMECO feeder line (uncoiler/feeder). Technical Specifications: ARISA Press: - Brand / Model: ARISA S-2-400-160-FS (No. 400365947) - Year: 2001 | Standard: CE - Rated force: 4,000 kN (400 tons) - Stroke (Min / Max): 25 - 250 mm - Stroke rate: 25 to 100 strokes/min - Closed height: 485 mm | Slide adjustment: 200 mm - Power: 55 kW | Press weight: 65,000 kg (65 tons) ARISA Moving Table: - Model: Type 934.34 (No. 934345950) - Table dimensions (L x W): 1,700 × 1,300 mm - Max. tool load: 6,000 kg | Floor to table height: 1,025 mm DIMECO Uncoiling Line: - Includes: Single/double mandrel uncoiler + straightener/feeder + loop control - Max. coil capacity: 6,000 kg We remain at your disposal for any further information. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: Nsdpozpz Dmsfx Abzswi High-performance mechanical stamping and forming press, ARISA brand, model S-2-400-240-FS, with a force of 400 tons (4,000 kN), year 1999. This high-precision industrial machine is ideal for stamping, cutting, and combined stamping/cutting operations for industrial series production (automotive, household appliances, precision sheet metal work). Here are the complete technical specifications: General Information: - Brand/Manufacturer: ARISA S.A. (Spain) - Model: S-2-400-240-FS (S Series) - Manufacturing No.: 400365704 - Certification: CE Type Examination No. 0070 090C 0088 09 95 (INRS) - Total weight: 66,000 kg (66 tons) Capacities & Performance: - Rated force: 4,000 kN (400 tons) at 7 mm from the force point - Slide stroke: 25 - 250 mm - Closed height: 600 mm - Slide adjustment: 150 mm - Stroke rate: 25 - 100 strokes/min - Maximum flywheel speed: 500 rpm - Normal stop: Top Dead Center (TDC) - Time to reach safety distance: 0.126 s Dimensions & Tools: - Maximum dimensions of the upper tool (L x W): 2,300 × 960 mm - Maximum weight of the upper tool: 5,700 kg Power & Energy: - Installed power: 65 kW - Power supply: 380-500 V / 50 Hz (Three-phase, connection cable section 3.5 x 50 mm²) - Pneumatic pressure: 6 - 1 bar - Hydraulic pressure: 270 bar - Clutch-brake couplings: 30 cycles/min (Minimum-maximum pressure: 59 - 67 bar) Included Equipment: - Damping cushion / upper pneumatic cylinders - Front transparent protective screens and side safety grilles - Mobile control panel on wheels and emergency stop panels - Part/scrap discharge conveyor - High-rigidity column frame Do not hesitate to contact us for further information or to request a quote.

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 Nwsdpfxjwzh A Ao Abzji KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg

Condition: used, Year of construction: 2011, control FANUC Series 31i-MODEL A Nwsdozpzfwspfx Abzei weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2010, control FANUC Series 31i-MODEL A Nwjdpszpzfqjfx Abzsi weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 1990, functionality: fully functional, G & H FS 40 SA, Year of manufacture: 1990, Grinding length: 400 mm, Grinding width: 200 mm, Working height: 320 mm, Electric facing device, Cross clamping, Cross stop. Nedjzpwywspfx Abzswi

Year of construction: 2007, condition: used, machine/vehicle number: 203229 0807, This G-H grinding machine, a CNC surface grinder, model FS 420 SC, is being auctioned off online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology - BGA - workshop, including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. You can find this and many other items on our platform. Nwodpjzp Dfaefx Abzji

Condition: used, This G-H grinding technology – CNC surface grinding machine, model: FS 640 SD – will be auctioned online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology location – including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. Nwsdpfx Abozp Dd Aszoi You can find this and many other items on our platform.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Rewind diameter: 800 mm Nodpfoywl D Nox Abzewi Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.