Used Gummi-Mayer Gummi-Mayer Parts Washer for sale (15,828)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return Fgsdov Tm Ayspfx Afueh + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: new, Year of construction: 2026, Ultrasonic cleaning system – ultrasonic cleaning unit Chamber made of stainless steel 1.4401 (AISI 316L) - including insulated hinged lid - including level monitoring/dry-run protection - including 1 stainless steel basket Fedslcctgjpfx Afuegh - Bottom-mounted ultrasonic transducers, frequency: 25 kHz, power (effective/peak): 500/1,000 watts - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: L x W x H 520 x 230 x 200 mm - Tank dimensions: L x W x H 600 x 300 x 270 mm - External dimensions: L x W x H 680 x 420 x 490 mm - Max. load weight of the basket: 20 kg - Unit is mobile

Year of construction: 2026, condition: as good as new (ex-display), Spray Cleaning System - Parts Washing System - NEW SYSTEM / Pilot Plant Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Fodpfx Aewitvqefujgh Useful height: 900 mm Max. loading weight: 600 kg Tank volume: 500 liters, spray pressure: 5 bar, 400 l/min. Heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304) and dip-pickled Including loading trolley in front of the system Included special equipment: - Steam extraction including condensate return - Automatic Water refill and level monitoring - Removable coarse filter in the return line to the wash tank - Removable basket surround - Preparation for retrofitting an oil separator - Weekly timer for heating - Electric spray pipe for optimized component cleaning - Inspection hatch in the tank area - Siemens S7 1200 control system with color touch panel, manufactured by Weintek Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic washing system – ultrasonic cleaning device Chamber made of stainless steel 1.4401 (AISI 316L) - includes insulated hinged lid - includes level monitoring / dry-run protection - includes 1 stainless steel wire mesh basket - Bottom ultrasonic transducer, frequency: 25 kHz, power (effective/peak): 600/1,200 watts - Heating up to 80°C, adjustable; power: 2,600 watts - Basket dimensions: L x W x H 320 x 320 x 280 mm - Tank dimensions: L x W x H 420 x 400 x 350 mm Fjdpfx Aelccuzefuegh - External dimensions: L x W x H 520 x 650 x 850 mm - Max. load capacity of the basket: 30 kg - Device is mobile

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Fgedpfx Afoztwkdoueh Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system – ultrasonic cleaning unit Chamber made of stainless steel 1.4401 (AISI 316L) - including insulated hinged lid - including level monitoring / dry-run protection - including 1 stainless steel basket - Bottom ultrasonic transducers, frequency: 38 kHz, power (effective/peak): 1,600/3,200 watts - Heating up to 80°C, adjustable; power: 6,000 watts - Basket dimensions: L x W x H 920 x 380 x 350 mm - Tank dimensions: L x W x H 1,000 x 450 x 450 mm - External dimensions: L x W x H 1,210 x 690 x 900 mm Fsdokuy D Hspfx Afuogh - Max. load weight of the basket: 50 kg - Total weight of the system: 160 kg - The unit is mobile

Year of construction: 2011, condition: excellent (used), ILSA IK20 metal cleaning machine for modified alcohol (solvent) Fgedpfx Afsyztxieueh Single basket In good condition Test run possible

Year of construction: 2025, condition: new, Spray cleaning system - parts washing system - NEW SYSTEM / pilot plant Basket usable dimensions: L x W 1,100 x 1,100 mm Usable height: 800 mm Max. load weight: 700 kg Tank volume: 320 liters, spray pressure: 4.3 bar, heatable up to 90°C System completely manufactured in stainless steel 1.4301 (AISI 304) System including loading trolley in front of the system Included special equipment: - Steam extraction with condensate return - Automatic water replenishment and level monitoring Fodpfx Afjhl Icqoujgh - Filter unit (coarse filter) in the return line to the washing tank - Preparation for retrofitting an oil separator - Weekly timer - Electric spray lance for optimized component cleaning - Inspection hatch in the tank area - Siemens Logo control with color touch panel (4.3") On request, commissioning can be carried out by qualified personnel.

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Fgodpfx Afjuc Tn Ajueh Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg

Condition: new, Year of construction: 2026, Ultrasonic washing machine- ultrasonic cleaning device Fgjdpfedz T Nyox Afuoh with attached oil separator and insulated hinged cover Floor ultrasound, frequency: 25 kHz Power (eff./peak): 750 / 1,500 watts Heating adjustable up to 80 ° C; Power: 4,000 watts Basket dimensions: LxWxH 570x320x250h mm Pool dimensions: LxWxH 650x400x350h mm Dimensions of the device: approx. 1200x550x750h mm max.loading weight of the basket: 30 kg 1 piece of stainless steel shopping cart is included Device is on rollers

Condition: as good as new (ex-display), Year of construction: 2026, Spray cleaning system – parts washing system – NEW SYSTEM / pilot system Basket useful dimensions: L x W 1,100 x 1,100 mm Useful height: 800 mm Maximum load weight: 700 kg Tank volume: 320 liters, spray pressure: 4.3 bar, can be heated up to 80°C Fgodpfxec Udkbs Afueh System completely manufactured in stainless steel 1.4301 (AISI 304) System including loading trolley in front of the system Included special equipment: - Steam extraction with condensate return - Automatic water replenishment and level monitoring - Filter unit (coarse filter) in the return line - Preparation for retrofitting an oil separator - Weekly timer - Electric spray lance for optimized cleaning of smaller parts - Inspection hatch in the tank area - Siemens Logo control system with a color touch panel, manufactured by Weintek (4.3") Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temperature - 90°C) Machine dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash time timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external cladding) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking system Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Fedpfx Ajd Ryxcsfuogh Steam extraction system including condensate return Parts washing machine is in new condition (test/pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Immersion Washing - Drying Fgodpjd I E Itofx Afujh All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Please feel free ot contact with us for further information.

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Fjdpfx Ajd I Aw Ejfujgh Rotary basket washer Please feel free to contact for other details and options.

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine - spray cleaning system, type L90 Automatically operated hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar (stainless steel pump) - Tank volume: 105 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 (AISI 304) Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Fsdpfxod H Slce Afujgh Oil skimmer for bath maintenance Parts washing machine is in new condition (test system/pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2023, condition: new, Spiral washer, used for cleaning small parts like bolts-nuts-screws etc. Tunnel-type spiral washer, parts are loaded via vibrating table and transferred via spiral conveyor. Washing-rinsing-drying options are available Parts washer for small parts. Fsdofhb Icspfx Afuogh Automatic washing machine, small parts washing, stamped parts washing machine, spiral washer, bolt washer, nuts washer, screw washer

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. Fgodpfx Afev S Diheush If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2023, condition: new, INTERSONIK VAPCON is designed and produced by INTERSONIK engineers and used for eliminating water vapor generated by industrial parts washers. For a parts washer operating with 70 degrees Celcius hot water it is amazing that there is no water vapor emission during the washing and when the lid is opened as well. In the video, you can see an industrial application of VAPCON. VAPCON helps improving work safety by eliminating the vapor and save nature by recycling the water. Fodpfx Aod Nwlfofuogh Ideal for parts washers. For detailed information please contact us.

Condition: used, Year of construction: 2022, functionality: fully functional, KARL MAYER PROSIZE - HIGH-PERFORMANCE and INNOVATED SIZING UNIT for processing spun yarns -28 Pos : max. working width in the creel: 2200 mm -200 mm : working range -Beam creel :max. beam flange diameter: 1000 mm -Warp Tension Control Fgodozb Uzwjpfx Afujh -Automatic squeeze pressure control With all required accessories.

Condition: new, Year of construction: 2024, Cabin Type Parts Washer for precise cleaning of metal parts. INTERSONIK ROTAWASH is a cabin type parts washer which provides precise cleaning and perfect drying. Fedsd I A Hrspfx Afusgh Its effectiveness is proved on automative industry especially in engine block washing and cylinder head washing. Operation Principles: Effective washing of whole surfaces of the work piece with high volume spraying and rapid liquid feeding to cabin. With rotational motion, whole complicated surfaces, oil channels, blind holes, water jackets of work piece is provided completely clean and dry. Hermetic operation system prevents the diffusion of water vapour formed during whole operation. Whole operation is controlled via PLC Other Details - The machine has sound and durable body construction. - Automatic water supply and chemical design system provide minimum system (maintenance) care and maximum operation performance. -The water contact surfaces are made of stainless stell. -Body covers and control panels are made of epoxy painted stell sheets,which are provided and guaranteed long and continious working life. -Ultrasonic system integration is also available as an option. engine block washing, power train washing, high presssure washing machine, rotational washing machine, cabin type washing machine, cabin type parts washer, parts washer, solvent washer Please feel free to contact with us for other details and options.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting Fgodpfexp Urdox Afuoh

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Fedpfxjz Nhd Ee Afujgh FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request. Fedpszvht Ijfx Afujgh

Year of construction: 2020, condition: excellent (used), The Moba CTW6500 automatic industrial machine designed to denest, wash, stack, and dry plastic egg trays at a capacity of up to 6,500 trays per hour. High Capacity: Processes up to 6,500 plastic egg trays per hour to keep up with large egg grading and processing facilities. Full Automation Cycle: Automatically performs the entire handling and cleaning sequence, including de-nesting (separating stacked trays), washing with water and detergent, drying, and stacking clean trays for reuse. Fodpfxsz D Uure Afuogh Hygienic Design: Built for poultry farms and packing stations to meet strict biosecurity and food safety standards by removing dirt, egg residue, and contaminants Complete and in good working condition Shipping can be arranged

Condition: good (used), Mayer pot holders 15 cm inner diameter holder Number available: 16 piecesInner size of pot holder: 15 cm Height from bottom plate to upper rim of holder: 16,5cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Fsdpfx Afsz Rauxeujgh See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery