Used Hauslhof Demonstration Hauslhof Compressor Air Ko630-100-4 for sale (83,295)

Condition: used, Year of construction: 2015, A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE , shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible. Bedpfx Ahez Hn Svjmsdh

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0138_MAXXI4,0D_270st, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 4.0 D - 270 ST - 10 bar with standing 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. Bdjdpfsd Hy T Aox Ahmsh 2 cylinders Pressure: 10 bar Rated power: 4.0 kW Delivery quantity at 7 bar: 495 l / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 155 x 59 x 113 cm Weight: 134 kg Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: excellent (used), Compressor type: Dry air Bedpfowcgc Rjx Ahmodh Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Motor power: 90kW

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC, type Rollair 40 -- RLR 40BM6 Manufacturer's serial number: 6240330200 Year of manufacture: 2003 Volumetric flow rate: 4.6 m3/min. Pressure: 10 bar Main motor power: 30 kW Power supply: 400 Volt, 50 Hz Connection thread: 1 1/2 inch - 36022 operating hours recorded (compressor running time) - 19257 operating hours recorded (load hours) - Sound-insulated Space requirement L x W x H: 1850 x 1050 x 1760 mm Weight: 910 kg Good condition Bsdpfxjfmim Uj Ahmjdh

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: Bdsdpfsy H Dv Ajx Ahmeh • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,700 mm, Frequency-controlled 15 kW 4-in-1 screw compressor With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-way fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 1.3 m³/min at 1.6 MPa Bodpfxsv Uqlzs Ahmedh Integrated pressure vessel approx. 330 l

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, overall weight: 410 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 0.6 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, New screw compressor for sale, available from stock. First-time commissioning has been completed. Simply plug it in and get started... Technical data: Drive power: 5.5 kW (also available with 4.0 kW) Controlled by a frequency converter (no high inrush current) Tank volume: 300 l Maximum pressure: 10 bar Bdodpfx Aozt Nrtjhmeh With refrigerant dryer 3-stage filter unit Automatic condensate drain Quiet operation thanks to sound insulation 1 year warranty 4250 CHF including VAT Feel free to come by for a viewing. Also, check out my other listings.

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks Bdodpfxsu R S A De Ahmsh High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Bdsdpfx Aheyb Sdiemoh Made in Germany Good working condition

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Motor output 250 kW Overall size 4000 x 2100 x 2500 mm 0 min. 4 bar 0 max. 13,5 bar Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 Bsdpovx Uvljfx Ahmodh - El. Steam trap BEKO 14

Condition: ready for operation (used), Year of construction: 2001, operating hours: 9,584 h, pressing force: 153 t, total width: 1,700 mm, total height: 2,820 mm, overall weight: 11,000 kg, controller manufacturer: DELEM, controller model: DA-69T, product length (max.): 3,400 mm, number of axes: 4, This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details. Bdedpfx Aezm Unyshmjh - Control System / Software: Delem DA-69T CNC Control (4 axes)- Operating Hours: 9,584.1 hours- Maximum Operating Pressure: 300 bar- Distance Between Uprights: 2600 mm- Ram Stroke: 215 mm- Installation Height: 525 mm- Throat Depth: 300 mm- Working Height (without table/tools): 900 mm- Rapid Advance Speed: 150 mm/s- Working Speed: 0 - 9.8 mm/s- Return Speed: 100 mm/s- Safety Speed: < 10 mm/s- Stopping Time: 0.15 s- Safety Distance: 270 mm- Ram Dwell Time: 0 - 9.9 s- Drive Power: 11 kW- Total Connected Load: 15 kW- Voltage / Frequency: 400 V / 50 Hz (3 PEN)- Control Voltage: 24 V DC- Current Rating: 30 A- Fuse Protection: 35 A- Hydraulic Tank Capacity: 270 L- Max. Oil Operating Temperature: 80 °C- Oil Filtration on Filling: < 25 µm- Sound Level: < 70 dB(A)- X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)- R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)- Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)- Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)- Tool Clamping / System: Wila Modufix- Operating Ambient Temperature: +5 °C to +40 °C- Operating Humidity: 30% to 95% (non-condensing)- Included Accessories & Tooling:* Foot control panel* Technical documentation (1 set)* Sheet support arms: 2x 1m, 2x 0.5m* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100) Technical Specification Bending Length 3100 mm

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Bodpezcaufofx Ahmodh Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: new, fuel type: electric, color: white, Year of construction: 2021, Year of manufacture: 2021 Bodpfjuu A Tyox Ahmedh Model year: 2021 Usable material: Concrete CE marking: yes Damages: none Price: On request

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! Bsdpfx Ahjttucgemodh International shipping costs on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Bsdpow Rd Avjfx Ahmedh Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Bdedpfjzf Ivusx Ahmsh Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Bodpfxoxvidns Ahmjdh

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Bedjwr Ul Sopfx Ahmedh Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2018, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 160 x 130 x 130 cm Bdsdpfxjyuga Es Ahmoh - Details: - └ Description: Includes tank and dryer - Year: 2018 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Bdsdoz Ef N Aspfx Ahmeh Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert Bdedpfepbihvex Ahmjh -Filter elements: air filter 100 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H940 mm -Total weight: 136 kg

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Bdodoyzhmbopfx Ahmoh Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Bedpfx Ajhy Tzyshmedh Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Bdedjxyhdbjpfx Ahmjh Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Bedpfx Astx Aknehmodh Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.