Used Heesemann Longbelt Sanding Machine for sale (65,409)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW Bsdpfx Asy Sap Ajfwjdg - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of Bedpfxet Tqy Eo Afwjdg oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Bedpfx Aoythu Isfwsdg Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Serial number: 95.005/6/95 Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations. Bodpfx Ajzv Eaxofwsdg

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Bsdpfx Afey Iu N Aswjdg Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Bodsyrqzbjpfx Afwodg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Bdjdpfx Afjy Nznujweg

Year of construction: 1991, condition: used, weight 240 kg max 50 mm ja Bodpfx Ajztfvbsfwedg serial number 2035

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Bedpfxjxgvcxs Afwedg Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Year of construction: 1994, condition: used, Second-hand machine Year of manufacture: 1994 Features and technical specifications: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Grinding unit: with grinding shoe Feed speed: 2-speed Feed direction: reversible (forward/reverse) Motor start-up: star-delta Bdjdpfxjzk Nucs Afwsg Mains connection: 380 V Weight: approx. 450 kg Availability: at short notice Location: Baden-Württemberg

Condition: excellent (used), Catalog number: 8075 TECHNICAL DATA - Table length: 2200mm - Table width: 700mm - Main motor: 2.2kW - Manual beam lifting - Abrasive belt width: 160mm - Grinding head - Dust extraction nozzle diameter: 120mm - Overall dimensions (L/W/H): 3060x1240x1430mm - Weight: 250kg ADVANTAGES Bsdszuk Huopfx Afwsdg – Made in Austria – Unpainted – Used sander, very good condition Net price: 6500 PLN Net price: 1548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 2025, New demonstration machine! List price: €4,938 net. The upper part is made of heavy-duty cast iron and features a built-in three-phase motor, 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; motor circuit breaker and main switch according to VDE; dimensions of the sanding belt backing: 850 x 150 mm; steel table with height adjustment via spring pressure; belt dimensions: 150 x 2280 mm; the sanding belt backing is coated with a graphite sliding layer; the machine is supplied with a set of sanding belts; additionally included in the scope of delivery is an angle and miter fence. The machine is dust-tested (GS) according to Holz-BG-Stuttgart when connected to a central dust extraction system with an air velocity of at least 20 m/s. Standard equipment: - swiveling 90-180° - motorized belt oscillation - small support table on the idler pulley - pneumatic belt tension. Technical data: Motor power: 2.2 kW, sanding belt dimensions: 150 x 2280 mm, sanding belt speed: 22 m/s, table size: 750 x 350 mm, space requirement: 1000 x 800 mm, weight: from 180 kg, dust extraction port diameter: 100. Storage location: Rieth. Bedpfex Hwpvox Afwsdg

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec Bdjdpfx Afsrbyrpoweg volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: good (used), Year of construction: 2009, I sell the widebelt sanding machine Costa SA1 TT 1350, year 2009. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad 1pc. cleaning unit. Working width 1350mm Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. Bjdpfovxlg Ijx Afwedg End brushing unit with dust extraction. Total weight 3400kg Designed for the line, with fixed working height and moving aggregates. 2 motors, total power 31 kW Including documentation. Condition very good. Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Bdodpfxjxtxhkj Afweg Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: ready for operation (used), Year of construction: 1993, Langzauner LZK 4 edge sanding machine with oscillating veneer edge sanding unit Sanding unit infinitely adjustable from 0- 45° miter fence Oscillation Height-adjustable sanding beam to utilize the entire belt width Table size 1250 x 350 mm Motor power 3kW Belt length 3000 mm Belt width 200 mm Belt speed 22m/sec Weight approx. 450 kg Space requirement 1900 x 900 mm Bdsdpfx Ajuacg Ajfwog year of construction 1993 Condition checked for function Price 5500.-

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Bdedpfx Afozmyp Aewsg Overall dimensions mm 2100 x 1600 x 1350 h Weight kg 950

Condition: excellent (used), 4 kW motor Bdjdszu Ng Tjpfx Afweg Roller feed system Sanding belt length: 100 cm Working height: 14 cm Table with adjustable angle and height

Condition: excellent (used), Year of construction: 2004, grinding height: 100 mm, working width: 250 mm, grinding width: 250 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Bdjdpfx Afsxvz Uljwjg Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Pneumatically controlled pressure rollers for workpiece guidance and stabilization Feed rate steplessly adjustable, approx. 5 - 25 m/min Extraction connections: 150 mm Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports Bdodpfx Ajw Tfxdofwog 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Condition: good (used), Year of construction: 1999, functionality: fully functional, Volpato LVO 120 edge grinder SN 1929112 Year of manufacture 1999 Manufacturer: LASM Volpato Italy Small single-sided grinding center Bjdpfjvwdqcsx Afwedg VOLPATO offers the LVO 120 grinding machine, with combined function that can make life easier for many professionals in the industry. It was developed under the direction of experienced company staff, who work with passion to achieve the best possible result. Vertical oscillating grinder 2.2 kW motor (3 HP) Swivel table 0-90 degrees Work table dim. 880 x 370 mm. Mechanically swiveling Additional support and "round" grinding wheels Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking Technical data may change

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Bsdpfsyvfwrsx Afwedg Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh Bdodpfed E Ixzjx Afwsg • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Bdsdpfxey Ehiws Afwsg Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush Bdjdpfsxfl Easx Afwsg max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark