Used Hega Fe 132 Sb-4 for sale (61,663)

Condition: used, empty load weight: 5,100 kg, maximum load weight: 34,900 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2016, next inspection (TÜV): 01/2027, total length: 24,800 mm, total width: 12,500 mm, total height: 126,400 mm, suspension: air, tire size: 385/55 R22,5, color: blue, Year of construction: 2016, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, brakes: disc brakes, suspension: air suspension with lift function, lifting and lowering capability, lift axle on the first axle, 2x7 + 15-pole electrical connections, fire extinguisher box, Thermo King generator set (defective), pneumatic rear extension, 2x LED reversing lights, 1x20/2x20/1x30/1x40, high-cube, gearbox support winch defective. Ljdpfjy T Sqnsx Akujrl

Condition: used, mileage: 665,199 km, power: 175 kW (237.93 HP), first registration: 02/2014, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, loading space length: 6,600 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, Equipment: ABS, soot filter, tail-lift, 2-seater, power steering, automatic transmission, electric windows, electric exterior mirrors, heated exterior mirrors, Waeco reversing camera, onboard computer, multifunction steering wheel, Euro 5, radio-CD, 5-pin power connector, rear air suspension, right side door, Carrier Supra 850 refrigeration unit, D-Hollandia tail lift with 1500 kg payload, etc. Subject to errors, prior sale, and typographical mistakes. Sale only to traders and for export. !!!! Fg-8058 !!!! Key number: 119 !!!!! Test/inspection drive to Tüv Dekra or Mercedes possible !!!!! Upon request with new TÜV !!!! Lsdpfx Akoyy Ewzoujrl

Condition: used, mileage: 264,811 km, power: 175 kW (237.93 HP), first registration: 09/2020, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 34 m³, loading space length: 6,245 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, electronic stability program (ESP), tail-lift, ATEGO 1324 L refrigerated box body, 6.20 m, with roll-up door + tail lift, 1.5 tons. * Body: CHEREAU, year of manufacture 2020, with side door on the front right * THERMOKING T-1200 R (diesel engine) and standby cooling, 380 V ELECTRIC * Vehicle number for customer inquiries: 4674 * Active Brake Assist * Engine version EURO VI, D * Lane Keeping Assist * Tail lift * High Performance Engine Brake * Air suspension, rear axle * Crossmember, for trailer coupling G135 * Rain/light sensor * Stability control assistant (ESP) * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Power windows, electric, on both sides * Gearbox G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Locking system, with central locking * Cruise control * Storage compartment, high, on the engine tunnel * AdBlue tank 35 l * Roof hatch/ventilation flap * Weight variant 13.5 t (5.1/9.3) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Plastic tank 180 l, left * Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm * Wheelbase 4160 mm * Tires tubeless, 285/70 R 19.5 front axle * Inline engine, 6 cylinders * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, under frame, rear axle * Front spring, 5.1 t, parabolic * Tachograph digital, 2nd generation, ADR * Environmental badge (green) * Two-seater * Serviced according to maintenance schedule Lrsdpfjy Tz Hljx Akuel No liability for printing and typing errors Sale only to commercial customers Subject to errors and prior sale* Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will be happy to provide you with a LEASING-FINANCING-RENT-TO-OWN offer Guarantee insurance possible on request with the insurance company * TÜV / UVV tail lift inspection / tachograph inspection and installation of OBU device by our partners on site * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: new, For sale: Electric motor from the renowned German company Kuenle Elektromotoren Model KPER 132 S4 The motor is new, warehouse surplus Never used Very good condition, possible storage marks visible in photos Technical data: Power: 5.5 kW Speed: approx. 1440 rpm Voltage: 380/660 V Frequency: 50 Hz cos phi: 0.82 Protection class: IP54 Design: IM B3 Made in Germany Applications: industrial machinery pumps fans production lines Ljdpjyv R Siefx Akusrl automation Robust, high-quality German industrial motor Ready for operation immediately after connection

Condition: ready for operation (used), Allen Bradley 1326AS-B440G-21 Servomotor series A SN:H002690 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Lrodpfx Asttxzzjkusl

Condition: ready for operation (used), Allen Bradley 1326AS-B460F-21 Servomotor Series A SN:H003181 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Lrodpjtkgpbsfx Akuol

Condition: ready for operation (used), Allen Bradley 1326AS-B460F-21 Servomotor Series A SN:H003182 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Ledpfx Akstkgpfouerl

Condition: used, mileage: 327,402 km, power: 177 kW (240.65 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 7,280 kg, maximum load weight: 6,220 kg, overall weight: 13,500 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 35 m³, loading space length: 6,280 mm, loading space width: 2,470 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Mercedes-Benz Atego 1224 E6 Lrsdpoy Nbcfofx Akujl - Box body - Dimensions: 6.28 x 2.47 x 2.30 m - Load securing system - Tail lift - Trailer coupling - Automatic transmission - Cruise control - ABS/ASR/ESP - Lane departure warning system - Air conditioning - Leaf and air suspension - EURO 6 - Payload: 6,220 kg - Tyres: 285/70R19.5 Very good condition, German vehicle. Export price.

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH Ljdpfeyga Ugox Akuorl • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: excellent (used), functionality: fully functional, power: 62 kW (84.30 HP), overall weight: 3,600 kg, Year of construction: 2016, operating hours: 2,929 h, BOKI 4551/Kiefer/cemetery excavator/4x4/dozer blade • Manufacturer: Boki • Model: Kiefer 4551 Lsdpfx Asy Excbokuorl • Year of manufacture: 2016 • Operating hours: 2,929 h • Engine power: 62 kW • All-wheel drive 4x4 • Dozer blade/support • 4-point stabilizers • Articulated boom • Hydraulic rear outriggers • 20 km/h • Gross weight: 3,600 kg • Documentation • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Sale is subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale in accordance with our general terms and conditions.

Condition: used, mileage: 279,811 km, power: 175 kW (237.93 HP), first registration: 08/2020, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 34 m³, loading space length: 6,302 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, electronic stability program (ESP), tail-lift, ATEGO 1324 L Refrigerated Box 5.50 m with Roller Shutter + Tail Lift 1.5 t * Body: CHEREAU year 2020 with side door front right * THERMOKING T-1200 R (diesel engine) and stationary cooling 380 V ELECTRIC * Vehicle number for customer inquiries: 4658 * Active Brake Assist * Engine type EURO VI, D * Lane Keeping Assist * Tail lift * High Performance Engine Brake * Rear axle air suspension * Cross member for trailer coupling G135 * Rain/light sensor * Stability Control Assist (ESP) * Electronic braking system with ABS and ASR * Driver comfort suspension seat * Electric windows, both sides * Gearbox G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Central locking system * Cruise control * High storage compartment on engine tunnel * AdBlue tank 35 l * Roof hatch/roof ventilation flap * Weight variant 13,5 t (5,1/9,3) * Main mirror, electric, driver side * Electronic compressed air supply unit heating * 180 l plastic tank, left side * Engine OM936, inline 6, 7.7 l, 175 kW (238 hp), 1000 Nm * Wheelbase 4160 mm * Tubeless tyres, 285/70 R 19.5 VA * Inline engine, 6 cylinders * S-Cab ClassicSpace, 2.30 m, tunnel * Stabilizer under frame, rear axle * Front spring 5.1 t, parabolic * Digital tachograph, 2nd generation, ADR * Emission sticker (green) * Two-seater * Full service history No liability for print or typing errors Sale only to commercial customers Subject to change and prior sale * Subject to alterations, prior sale and errors. The description serves as vehicle identification and does not constitute a warranty in the legal sense. The content of the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASING-FINANCING-INSTALLMENT PURCHASE offer Guarantee insurance available upon request with the insurer * TÜV / UVV tail lift / Tachograph inspection and installation of OBU device can be arranged by our partners on site * 30-day export number plates Lodpfx Akey Dkkzousrl All export documentation can be arranged and must be requested individually * Toll-Collect for road tolls can be booked on our premises * Free transfer from Stuttgart Airport or Metzingen train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH CONTACT: Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number: * * ---- Visit our website at * Over 200 vehicles always in stock

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Lodjyzc Ruepfx Akujrl

Condition: used, mileage: 715,752 km, power: 309 kW (420.12 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 6,250 mm, total width: 2,520 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2006, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, spoiler, traction control, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Bluetooth - Brake booster - Combination lights - DAB radio Lrodpfxoywwkuo Akuel - Roof cover - Roof spoiler - Differential lock - Remote central locking - High beam - Windscreen - Enclosed cab - Interior roof lights - Cab - Refrigerator / cooling drawer - Alloy wheels - Beacons - Air suspension - Air-suspended seats - Air horn - MX engine brake - Radio/CD player - Radio/cassette player - Warning beacon - Disc brakes - Hose sets - Sideskirts - Sun visor - Pre-heater - Toolbox = Further Information = Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Number of cylinders: 6 Engine displacement: 10,308 cc Unladen weight: 7,195 kg Payload: 11,805 kg Gross vehicle weight (GVW): 19,000 kg Number of seats: 2 Registration number: BZ-GL-45

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Lredpfx Akjd Tbbdjuol The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Lsdpfx Aofdkb Tekuerl According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Lrsdpjd Tqaljfx Akujl

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Ljdpfx Akjfdkb Ujuorl - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Lsdeguk A Hspfx Akujrl The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth Lrsdpfxefdkbhs Akuel - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Ljdpjguk Dkjfx Akuerl - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Lrodpfxoguk Dvj Akusl - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 355,811 km, power: 175 kW (237.93 HP), first registration: 06/2014, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 38 m³, loading space length: 6,940 mm, loading space width: 2,460 mm, loading space height: 2,250 mm, Year of construction: 2014, Equipment: ABS, electronic stability program (ESP), soot filter, tail-lift, ATEGO 1324 L refrigerated box truck 7 m with MBB tail lift 1.5 t * MITSUBISHI TDJ 430 D in-transit cooling * Payload approx. 6,150 kg * Vehicle number for customer inquiries: 3583 * Engine specification Euro VI * Air suspension, rear axle * Rear axle differential lock * Electronic Stability Program (ESP) * ROECKINGER trailer coupling * High Performance Engine Brake * Cruise control * Digital tachograph, EC, rev counter * Mercedes PowerShift 3 * Transmission G 90-6/6.70-0.73 * External sun visor, transparent * Electric windows, both sides * Driver’s comfort air-sprung seat * ABS brakes * Particulate filter * Environmental badge (green) * Two-seater * Inline 6-cylinder engine * Metallic paint control * Weight variant 13.5 t (5.1/9.3) * Fuel pre-heating * Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm * AdBlue tank 25 l * Plastic fuel tank 180 l, left * Tubeless tyres, 285/70 R 19.5 front axle * Main mirror, electric, driver’s side * S-Cab ClassicSpace, 2.30 m, tunnel * Reverse warning system * Roof hatch/roof ventilation flap * High storage on engine tunnel * Stabilizer, underframe, rear axle * Wheelbase 4760 mm * Electronic air supply heating unit * Cross member, trailer coupling G135 * Pre-installation for tail lift control * Full service history * Front parabolic springs, 5.1 t * Metallic finish * 2/3 doors No liability for printing or typographical errors Sale to commercial customers only Errors and interim sale excepted. Changes, interim sale and errors expressly reserved. The description serves for vehicle identification only and does not constitute a warranty in the legal sense. The specification as per the purchase contract shall be definitive. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-HIRE PURCHASE proposal Warranty insurance available on request through our insurer * TÜV / UVV LBW / tachograph check and installation of OBU unit by our local partners * 30-day export license plates All export customs documents possible, but must be requested individually Ljdpfxspxkkrj Akuerl * Toll-Collect MAUT can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * ---- Visit us on our website * constantly over 200 vehicles in stock

Condition: used, Electric motor, three-phase motor Lrodpjcncq Usfx Akujl -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 3x available -Dimensions: 460/320/H260 mm -Weight: 58 kg

Condition: good (used), electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 Lrsdpfxscnhbqe Akujl -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 440/265/H360 mm -Weight: 61 kg

Condition: ready for operation (used), SEM MT30F4-52 Ferrite Brushed DC Servomotor SN:J13270 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Lredpfst S Al Djx Akusl