Used Helios 0-500 Mm for sale (115,617)

Condition: used, machine/vehicle number: 001490U, For Sale Used single-girder overhead crane ± 8.900mm x 500 kg Bodjw I Rrxspfx Ahmjwu

Condition: used, diameter 500 mm hollow 135 mm weight / kg Diameter 230 mm Face plate, face plate chuck, four-jaw chuck, facing chuck - Chuck size Ø 230 mm Bwodpoytyb Tefx Ahmeu - Through hole Ø 90 mm - Weight 33 kg

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM Bwjdpfxjzwgpqo Ahmju TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: good (used), Vernier caliper, caliper, vernier caliper Bsdpjg Sn Ahefx Ahmewu -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg

Condition: used, Mechanical Shear BOMBLED type 9G Bsdpfszwcniox Ahmowu Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: good (used), Year of construction: 2016, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device Bodszuawvepfx Ahmewu -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK-EU -Dimensions: 470/500/H420 mm -Weight: 18.4 kg

Year of construction: 1988, condition: excellent (used), Splash guard 5256 Diameter 500 mm Height 100 mm Bjdsd Tyxgspfx Ahmewu

Condition: used, Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm Bodpfx Ajupbdyjhmjwu -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Condition: good (used), Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm Bwodpfxeg I D Ngj Ahmeu -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 60 mm, total width: 550 mm, total height: 80 mm, total length: 1,125 mm, construction width: 550 mm, construction height: 80 mm, empty load weight: 45 kg, TAF item number: 1000005726 Manufacturer: TAF Year of manufacture: 2025 Bodpfexrdkujx Ahmowu Overall dimensions (LxWxH) in mm: 1,125 x 550 x 80 Width incl. side panel in mm: 505 Side panel height in mm: 70 Conveyor width in mm: 500 Conveyor height in mm: 80 Substructure: without Curve (degrees): 70 Curve radius, inside in mm: 800 Curve radius, outside in mm: 1,300 Support roller axle type: 8 mm steel thread Support roller diameter in mm: 50 Support roller per axle: 3 Support roller material: plastic Roller pitch, inside in mm: 60 Roller pitch, outside in mm: 90 Drive: gravity Net weight in kg: 45 Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 1977, functionality: fully functional, Headstock and faceplate lathe with sliding bed This machine can be used for normal turning operations, as well as with the bed shifted by approximately 500 mm, for large diameters up to 2000 mm. This makes the machine very space-saving. It is a special lathe for both normal and large workpiece diameters due to this sliding bed feature. Manufacturer: Ravensburg Model: 1500 x 2000 mm Year of manufacture: 1977 Faceplate diameter: 1500 mm Bwodpfx Aezxgr Ushmju Center height in the saddle: 1000 mm with the bed shifted Workpiece diameter in the saddle: 2000 mm Turning length: 2000 mm Simple tool holder: 90 mm high Top slide with automatic feed: 500 mm Top slide, transverse: 400 mm Cross slide: 700 mm 3-way bed, width: 240; 150, 150 mm L x W x H: 5400 x 2300 x 2300 mm Weight: approx. 14 tons

Condition: used, Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate -Magnetic plate: 550 x 200 mm Bodpoh Ic Ntsfx Ahmewu -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 3500 mm -Width: 1750 mm -Plate thickness: 50 mm -Plate: with support ribs -Dimensions: 3500/1750/H815 mm -Weight: 4750 kg Bwjdjwucvdspfx Ahmou

Condition: used, Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 80 mm, total width: 600 mm, total height: 150 mm, total length: 2,500 mm, conveying length: 2,500 mm, construction width: 600 mm, construction height: 150 mm, overall weight: 80 kg, Manufacturer: Heber Year of manufacture: 2016 Overall dimensions (LxWxH) in mm: 2,500 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 135 Conveyor length in mm: 2,500 Conveyor width in mm: 500 Conveyor height in mm: from 150 to 1,100 Roller pitch in mm: 80 Support roller shaft type: Steel Support roller diameter: 50 mm Support roller per axle: 1 Support roller material: Steel Bwedpjzb Np Ajfx Ahmju Drive: Motorised roller Motor manufacturer: Interroll EC 310 Conveyor speed in m/s: 0.6 Net weight in kg: 80 Special features: 80° inclined roller conveyor Condition: used / fully functional Functional test: OK

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Bwedpfezt Sxvsx Ahmju Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, functionality: fully functional, CNC ROTARY TABLE 2000 X 2500 MM TABLE TRAVEL: 2500 MM LOAD CAPACITY: 20 TONS INDEXING: 360,000 POSITIONS Bjdpszzwkmofx Ahmjwu

Condition: good (used), Offer 26013 Technical data: Bsdpoyi Ahnefx Ahmjwu - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm - Table frame/base - Total weight approx. 550 kg

Condition: used, Year of construction: 2019, LISEC INSULATED GLASS LINE – Year 2019 Bwodpfozpwf Hox Ahmeu LISEC INSULATED GLASS LINE H 2500 mm L/R Max. glass size: H 2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Thickness of flexible spacer: 8-25 mm Consisting of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes LISEC RSVN-35/25U - automatic vertical inspection and positioning station for spacer frames LISEC VSA-35/25 - fully automatic vertical system for applying flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner LISEC FPS-35/25U2B - Fully automatic vertical press for laminating, flat pressing, and gas filling (argon or krypton) LISEC VL-1N/25 - Fully automatic vertical extrusion and sealing robot LISEC DOS-1 TH Mixing and Metering Unit

Condition: good (used), Year of construction: 2011, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK Bsdpfx Ahszuau Usmewu -Dimensions: 390/390/500 mm -Weight: 16.9 kg

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm Bwodoz H Iyyepfx Ahmeu With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: good (used), Offer 26038 Technical data approx.: - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 350 mm - Plate height with base frame approx.: 870 mm - Top plate thickness approx.: 75 mm Bsdpfx Ajyc T Dtjhmjwu - 9 T-slots in table surface, length: 3000 mm - Center distance of T-slots in table surface each: 250 mm - Center distance of T-slots from outside edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required space: L 3000 x W 2500 x H 870 mm - Weight approx.: 8000 kg

Condition: new, 0 2.000 kg height 500 mm width 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm Bodpfxoxaa Dms Ahmewu - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg

Condition: new, 0 5.000 kg height 500 mm width 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to Bedjxaak Hepfx Ahmswu - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Bedpfx Ahjd Tyu Eomjwu Diameter 500 mm Height 115 mm Taper 120 mm Estimated age

Condition: used, Year of construction: 2018, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker, clothes locker -Manufacturer: Pavoy, steel locker: three-winged, compartment width 30 cm -Width: 930 mm -Depth: 500 mm -Height: 1850 mm Bwsdpfx Ahjthrwcemou -Doors: lockable, without lock -Number: 2x lockers available -Price: per piece -Weight: 51 kg