Used Hensoldt Wetzlar Centering Microscope for sale (12,664)

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE 3 Spindle Machining Center Mfd. 2020 SN: 101262 Gjdpfxevn T Das Aagsbn Control: Fanuc Panel i Chip Conveyor

Condition: used, Year of construction: 2021, EMAG VMC 450 MT Mfd. 2021 Control: Siemens 840D SL Machine has no production hours Description CHUCK DIAMETER: 24" MAX WEIGHT: 1100 LBS. MAX SWING DIAMETER: 31" Gbjdpfx Asyzkdvsagon MAX TURNING DIAMETER: 23.5" X STROKE: 30" Z STROKE: 19" MAIN DRIVE: POWER: 100 HP FULL POWER AT 800 RPM MAX SPINDLE RPM: 2,000 C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES FEED DRIVE: RAPIDS Z / Z: 60 / 30 M / MIN. FEED FORCE X / Z 4 / 15 kN BALL SCREW DIAMETER X / Z: 40 / 50 MM MILLING SPINDLE: POWER: 100 HP MAX SPINDLE SPEED: 7000 RPM SPINDLE TAPER: CAPTO C8 TOOL MAGAZINE: 60 EQUIPPED WITH: MINERALIT MACHINE BED SIEMENS 840 D SL FULL ENCLOSURE LEVEL PADS TURN MILL DRIVE EMAG WORKPIECE CORRECTION SYSTEM EMAG OPERATING AND SETTINGS MASKS EMAG REMOTE DIAGNOSIS Y AXIS B AXIS +/- 95 DEGREE 1000 PSI COOLANT THROUGH TOOL X-AXI CLAMPING FOR GEAR TOOTH FORMING SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE LIFTING PUMP PAPER FILTER LOW PRESSURE COOLANT HIGHT PRESSURE COOLANT 1000 PSI PROGRAMMABLE COOLANT PRESSURE COOLANT MIST EXTRACTOR AIR BLAST CHIP FLUSH QUALITY CONTROL: WIRELESS GAUGING CALIBRATION BLK FOR PROBE TOOL GAUGING - BLUM LASER

Condition: excellent (used), Year of construction: 2022, Swiss CNC Chucker-Convertible Sliding Headstock Lathe W/ "B" Axis Gbedeyq S Utspfx Aagsn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL Gbjdpjyf Ncqjfx Aagsn 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 126937, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 32, controller manufacturer: Okuma, controller model: P200M-H, rotary table diameter: 400 mm, OKUMA MU-400VA 5-AXIS CNC VERTICAL MACHINING CENTER, FROM AEROSPACE COMPANY, 16" ROTARY PLATEN, 4TH AND 5TH AXIS BUILD IN TRUNION, 15,000 RPM 32 POSITION TOOL CHANGER, OSP P200M-H CNC CONTROL Okuma MU400VA CNC Vertical Machining Centre (2007) Description: Control OSP P200 Table working surface - 15.75", Max table load - 600lbs, X Axis travel - 30", Y Axis travel - 18.11", Z Axis travel - 18.11", A Axis trunnion tilt - +20 to -110deg, B Axis table rotation - 360deg, Table surface to spindle nose - 3.94" - 22.05", Rapids X & Y - 15.75 IPM, Spindle taper - CAT 40, Spindle speeds - 16000 RPM, Spindle Motor - 20HP, Tool magazine capacity - 32 Table Size 15.75" Dia Table Load Capacity 660 LBS # Axis 5 X-Axis (Longitudinal Travel) 30" Y-Axis (Cross Travel) 18.11" Z-Axis (Vertical Travel) 18.11" A-Axis (Trunnion Tilt Range) (±25°) +20° to -110° C-Axis Table Rotation Positioning 360,000° Gbjdpfou Illajx Aagen Max/Min Clearance Table Top to Spindle Nose 22.05" / 3.94" Distance Floor to Table Top 41.34" Rapid Traverse Rate (X, Y, & Z Axis) 1,574 IPM Spindle Horsepower 20 HP Max Spindle Speed 15,000 RPM Spindle Taper MAS BT40 Big plus Coolant Thru Spindle yes Automatic Tool Changer Capacity (ATC) 32 Electrics 220/3/60 Approximate Machine Dimensions 114" x 160" Approximate Machine Height 116" Approximate Machine Weight 17,000 LBS OKUMA OSP P200M-H CNC CONTROL BUILT IN 4TH AND 5TH AXIS 16" DIAMETER TRUNION TABLE 15,000 RPM SPINDLE LASER TOOL SETTER 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE CHIP CONVEYOR

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Gbsdpfx Asxdc T Ssagon

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Self-contained Gsdpowvwl Aefx Aagebn Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. So quiet, you can have a conversation beside the working machine.

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Complete with MSC20 Encoded Stage Controller RL532C50 Gedpfxsym Dt Ho Aagjbn HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Almig Combi XP15 receiver mounted air compressor (2025) Air Plants Dust Extraction Ltd dust extraction system (2025) Gjdozc Rzpepfx Aagsbn

Condition: good (used), Year of construction: 2015, 2015 Haas VF 3SS CNC Vertical Machining Centre Gedpfx Aajzc Ih Tegsbn Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). With Coolant Filtration System (208L Tank), Auger Screw Chip Conveyor, Renishaw OTS Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included.

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). Gbjdpfx Aaozc Id Uogsn With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2020, 2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). With Coolant Filtration System (208L Tank), Hennig Chip Conveyor, Renishaw Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included. Gbjdszc Idhjpfx Aagen

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, Gedpfx Aszcy S Rjagjbn sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Gsdpfszcy Irox Aagebn Din 40 spindle taper, 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, Gbjdpfx Aajzcy Ilogjn 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: good (used), Year of construction: 2014, Traverses XYZ; 1020 x 830 x 245 mm, Table size 1000 x 700mm., spindle taper HSK-E25, Gbodpezcwk Refx Aagen 5 station ATC, , Datron software

Condition: used, turning diameter over bed slide: 1,000 mm, turning length: 6,500 mm, Swift Heavy Duty Long Bed Lathe Swing Over Bed: 1000mm Distance Between Centres: 6500mm Spindle Speeds: 7.5 – 450 RPM Machine With: Gbedpfxozbx A Se Aagen 800mm 4 Jaw Chuck Fixed Roller Steady 400mm Dia Travelling Steady Rapid Traverse To Saddle Digital Readout

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. B axis +/- 120 degrees, C axis 370 degrees, Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63. Gedpfx Aszcv T Deagsbn

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm Gbjdpfoy Ixxbsx Aagon X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 230 V, input current: 16 A, input frequency: 50 Hz, travel distance X-axis: 915 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 176 mm, number of axes: 3, table length: 1,170 mm, table width: 760 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, documentation/manual, european tool clamping system, Compact 3-axis SCM Startech CN K CNC machining center for milling, engraving, sign making, and 3D prototyping. Work table of 1,170 x 760 mm, X-Y-Z travel of 915/610/176 mm, and Hiteco 2.4 kW milling head up to 24,000 rpm with ER25 tool holder. Equipped with: - Full safety enclosure - LED lighting - Numerical control with interpolation - HICAM2 interface - Ethernet connection - Pneumatic suction cup kit - Tool height sensor - 4th interpolating axis for lathe work - Base with wheels and adjustable feet Gedpfxozcfwre Aagebn Single-phase 230V power supply. Ideal for carpentry, engraving, machining, and prototype manufacturing.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: CE marking, Model Accord 30 FX Year November 2012 - First time installed in 2013 Machine type 3-axis CNC machining center for solid wood, doors, windows, stairs, and joinery Working feld: X 3680 by Y 1680 mm. Z-axis travel 250 mm BRC multifunction unit for cutting, routing and boring both vertically DUO HT 12 Machining Head Syncron 8 Frontal and rear row of stops H50 for plates Prearrangement for clamps and for pneumatic clamps for plate Automatic positions system for placemant of the support beams and vacuum cups. 16 adjustable suction cup H50 145x145 mm. 8 adjustable suction cup H50 145x55 8 adjustable suction cup H50 180x65 Nr 8 Lifting supporters Motoriserd belt for wastes removal. Main electro spindle power 12 kW Maximum spindle speed 20,000 rpm Gbodpfxszbz Htj Aagen Tool holder HSK-F63 Tool changer for 12 tools Vertical drilling spindles 10 X-Y rapid speed Up to 90 m/min Vacuum pump capacity 250 m³/h Maximum workpiece height 250 mm Supplementary base for bar Matic TecPad mobile console Pro-Speed Safety system XiLog Maestro soft wear Approximate machine weight 5 000 kg Volt 400 AC 50 Hz This machine still is in daily use to the end of week no. 24 Machine first time installed in 2013 and it is working on its orginal place. Come from Norway also low number of workin hours during the years. Rekman Maskin & Service - service of cnc woodworking machines since 1986

Condition: used, Year of construction: 2012, Automatic loading table Milling unit with 10 spindles, also inclined Swing machine FOM Spring 50 blade 500 mm horizontal Gbsdpfxoy Egzxs Aagjn Automatic unloading table

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, chuck outer diameter: 225 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, Additional photos of the machining area will be provided in the coming days. Additional options & accessories: - Band filter system incl. high-pressure pump Godpfx Aaszc Nlaogsbn - DMG CELOS software - 3-jaw chuck (SMW Autoblok KNCS-N-225-66) on the main spindle - 3-jaw chuck (SMW Autoblok KNCS-N-170-43) on the sub-spindle - Chip conveyor - Coolant gun - Various VDI-30 tool holders (6 powered, 4 static) - Original DMG mist extraction system - All original documentation Weight & dimensions: 4,300 kg 4066x2583x1829 mm (LxWxH)

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Gsdsy Af Huopfx Aagobn Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center with 4th axis - spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Gedjzc Rlhjpfx Aagobn Travel in X-axis: 2,500 mm Travel in Y-axis: 620 mm Travel in Z-axis: 500 mm Table clamping area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system CNC axis Full enclosure Electronic handwheel Coolant system Work area lighting Chip conveyor Description: For sale is a Hedelius C60-2500 CNC machining center with Heidenhain control system and 4th axis. The machine is in operation and can be inspected while powered on, by prior arrangement. With an X-axis travel of 2,500 mm and a table clamping area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in mechanical, tool, fixture, and steel construction. The comparatively low spindle running hours of only 9,546 hours are particularly noteworthy. The machine has a 4th axis, providing extended machining capabilities while reducing setup times. The Hedelius C60 stands for robust German engineering quality, high precision, and a long-lasting design. Inspection is possible at any time in Bremen by appointment. _____ Our general terms and conditions apply. In addition, the seller is not liable for typographical or data transmission errors. The information and images have been provided by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.