Used Holex Hoffmann 32 Mm Länge 285 Mm for sale (75,231)

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Klodpfx Amsmkixwe Nor - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Ksdpfomhh Dtsx Am Nslr We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,340 mm Number of bays / row of shelves: 01 pcs. 1,280 mm each Number of levels plus base level: 08 pcs. The scope of delivery includes: 02x shelf uprights, second choice Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. cross and diagonal braces The uprights are unassembled 1,534 mm high 300 mm deep 08x shelves, second choice Material color: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm f. Stand depth: 300 mm Weight per unit: approx. 4.79 kg 01x Pedestal cover, used Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight per unit: 0.71 kg 01x Cross brace, II. choice Designation: KV31013 Material color: sendzimir galvanized 48x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 321 G Color: dark grey Material: Polypropylene External dimensions (LxWxH): approx. 209 x 145 x 343 mm Weight per unit: 0.550 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately Kjdpfxst Hdgfe Am Nolr depending on the place of delivery or scope of delivery.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Klodpfx Amshy Nihj Njr Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x chipboard support, used Manufacturer: Mecalux Material color: orange total length: approx. 200 mm material thickness: approx. 1,5 mm for chipboard thickness: approx. 22 mm Crossbeam support: approx. 50 mm Weight: approx. 0.455 kg / pc. Remark: - The inserted chipboard serves only as a fall-through protection! - For further dimensions, please refer to the attached drawing. General information about the article: This article is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Kedpfxox Ebrpj Am Nolr Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Kljdpfx Amohvmkis Ner Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Vernier caliper, caliper, vernier caliper Kledpfx Amsr A H Sqo Nor -Manufacturer: Holex, digital caliper .: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Condition: good (used), Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, Digital Caliper -Item No.: 41 2811 300 Kljdor A H Smspfx Am Njr -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm Quantity: 1 piece available -Case dimensions: 465/180/H30 mm -Weight: 1.0 kg

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool Kedpsc U Tz Tsfx Am Nslr -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Condition: used, Workbench, work table, assembly bench -Width: 1500 mm -Depth: 710 mm -Height: 890 mm -Thick worktop: 50 mm Kedpfx Aed R N H Som Nelr -Drawer: 1 -Door: 1 -Trays: 4 -Weight: 103 kg

Condition: excellent (used), Turning heart Kljdpfx Ameln Ukco Ner diameter 100 mm length 380 mm width 160 mm thickness 32 mm weight 4 kg other sizes on request

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears Kljdpslb Iwmsfx Am Nor -Manufacturer: Steel, lever shears, sheet metal shears with stable base -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg Klodpfxjtvb D Us Am Nsr

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions Kedey D Ndyspfx Am Nolr -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Klsdpfx Aoydi A Iem Nsr -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: new, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW Ksdpfx Ajridpwom Nelr 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder

Condition: good (used), Machine reamers, reamer, reaming tool, locating cutter set, attachment reamer -Machine reamer: adjustable, 2 pieces -Diameter: Ø 32/55 mm -Mounted holder: MK3 -Submission/Price: complete -Transport dimensions: 360/90/H60 mm -Weight: 3.6 kg Kodpeyz Ix Djfx Am Nelr

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Kljdpfx Ameyzxals Njr -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm Kedpfxsyzfzvs Am Njlr -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm Kodpfx Amjyzfxho Njlr -Weight: 2.2 kg

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm Kledpfx Ajyzfu Aem Njr -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

Condition: good (used), Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm Kjdpsc Innkefx Am Njlr 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 3 pieces -Recording: MK5 -Length: 345 mm -Dimensions: see photos -Submission/Price: complete Ksdpfoucmqdex Am Njlr -Transport dimensions: 345/240/H40 mm -Weight: 9.9 kg

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 2 pieces -Recording: MK5 -Length: 450 mm Ksdpfx Ajuhr N Aem Nolr -Dimensions: see photos -Submission/Price: complete -Dimensions: 450/100/H45 mm -Weight: 6.3 kg

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 2 pieces -Recording: MK5 -Length: 495 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 495/160/H40 mm -Weight: 9.6 kg Kodpeucmp Tefx Am Nslr