Used Homag + Ligmatech Kar 210 Ambition 2274 for sale (4,688)

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, controller model: POWER CONTROL PC22, rotational speed (max.): 12,000 rpm, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Glue Application Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Nedpfx Aoyqx U Hsgrolg Rough top and bottom flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Wide belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Njdpfxjy In Dge Agrslg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Nlodpfxjz A Tx Tj Agrjg Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 239000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) Nlodpfszwk Idjx Agreg And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 Nsdpelkbn Iofx Agrolg - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: used, mileage: 300,224 km, first registration: 09/2003, overall weight: 37,000 kg, fuel type: diesel, color: green, axle configuration: 4x2, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2003, operating hours: 1,800 h, Disab Centurion P210/9 Year: 2003 Vacuum and blowing system Nlodpfxez Ezbnj Agreg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Nljdpfxozz Nnke Agrog Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Machine length: 3.7 m

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 0-200-95-6633, functionality: fully functional, input voltage: 400 V, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Number of units: 6 1. Unit: Pre-milling unit Manufacturer: Nordson Tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers Tools available 4. Unit: Rough milling unit Nlsdpfxez Eazys Agrsg 5. Unit: Cutting unit 6. Unit: Fine milling unit MACHINE DETAILS Voltage: 400 V Current consumption: 41 A Fuse rating: 50 A Transport packages: 5 Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Unladen weight: 3,500 kg EQUIPMENT Nordson unit, year of manufacture 2017 CE marking

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood Nledpfx Agsy In A Nerog Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Nsdpjy In A Ajfx Agrjlg Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Nlodpfjz Ekb Dsx Agrog Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors Njdsz Df Txspfx Agrelg - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Nlsdpfxey In Apo Agreg Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 006375, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Nledpop Apx Tefx Agrog

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, For sale is a HOMAG BMG 311 Venture 316 L CNC machining center manufactured in 2011. The machine is currently in operation and can be inspected and tested while powered on until its availability in November 2026. A video of the machine in operation is available; see the advertisement or YouTube. Equipment: Nedpsz Ek Htofx Agrslg * HOMAG BMG 311 Venture 316 L * Year of manufacture: 2011 * Control system / Software: WoodWOP 6.1 * Tooling will NOT remain on the machine * Vacuum pump included * Currently powered on and operational * Inspection and test run possible until November 2026 The machine is suitable for the professional CNC machining of wood-based materials and, due to its extensive equipment, is immediately ready for further use in production. A detailed functional test on-site is possible by arrangement. Availability: from November 2026 If you have any questions about the machine, require further technical data, images, or would like to arrange an inspection appointment, please do not hesitate to contact us. Contact: Dennis Bitzigeio Company: BIMA Maschinen & Zubehör

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Nodpow S E Rqjfx Agrslg

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Nljdpfoy In Avex Agreg No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Nlsdpfx Aju H R Hmsgrjg Max height workable: 250 mm

Condition: used, Year of construction: 2019, operating hours: 2,294 h, functionality: fully functional, machine/vehicle number: 0-250-71-6845, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 70 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, working width: 850 mm, total width: 1,984 mm, total length: 2,920 mm, total height: 1,895 mm, We offer a well-maintained HOMAG DRILLTEQ V-200 vertical CNC drilling and routing centre, manufactured in 2019. The machine was purchased new and has been used exclusively by our company. Our production volume is relatively low, and the machine has not been operated continuously or in two-shift production. It has typically been used for approximately 3–4 hours per working day. The machine is fully operational and currently in production. It can be inspected and tested under working conditions at our premises in Kaunas, Lithuania. A video of the machine in operation can be provided upon request. Key information: Manufacturer: HOMAG Nodozzwl Dopfx Agrjlg Model: DRILLTEQ V-200 Year of manufacture: 2019 Condition: Used, well maintained and fully operational Purchased new and owned by one company Approximately 145,105 parts processed Main operating time: approximately 2,294 hours HOMAG powerTouch control system Used in a small-scale, single-shift production environment Price: EUR 38,000 net. VAT may apply depending on the buyer’s VAT status and country of destination. Location: Kaunas, Lithuania For further information, technical specifications and additional photos, please call +370 655 51230.

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Nedpfx Agoz Ekfvsrjlg Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 2023, operating hours: 489 h, Homag EDGETEQ 300 Nljdpfx Aez D U A Asgrog The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026 Nsdpfx Agoztl N Uerjlg

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Nlodpfx Aszy I Tcegrog

Condition: used, Year of construction: 2002, functionality: fully functional, LIGMATECH ZHR 15 Transfer Unit / Roller Conveyor (Workpiece Return Conveyor / Boomerang) – will be sold separately from the edgebanding machine. HOMAG Optimat KL79 A20/S2 (2002) Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz Nedpfx Aeycg D Tegrslg • Compressed air: 8 bar

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm Nedpozzxzmofx Agrslg * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.