Used Homag Middle-Cut Throughfeed Saw 5 Units for sale (83,800)

Condition: used, Year of construction: 2018, Panel dividing saw Manufacturer: Homag Type: Profi HPP300/43/43 Year of manufacture: 2018 Technical data Cutting length: 4,300 mm Cutting width (programmable sliding table): approx. 4,250 mm Max. feed rate of the saw carriage: 130 m/min Optional saw carriage feed rate up to 150 m/min Saw blade projection: 80 mm (optional 95 mm) Max. saw blade diameter: 350 mm Nwjdpfxezuy N Sj Agrsl Main saw motor: 11 kW Scoring saw, motor-adjustable Clamping jaws: 7 pieces (2-finger design) Control system: CADMATIC 4.1 / 4.5 or powerTouch Total connected load: approx. 18.4 kW Compressed air: 6 bar CE marking Package thickness up to approx. 80 mm (standard) Max. saw blade: 350 mm Main saw blade: 350-380 mm, depending on configuration Scoring saw motor: 1.5-2.2 kW Extraction capacity: approx. 3,350-5,230 m³/h Processing: Single sheets and package cuts Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 With loading system Njdpfozkmrfex Agrswl

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions Nedpfxeztl Sco Agrjwl 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Max. speed 18,000-24,000 rpm (depending on configuration) Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Nodpfx Agszuw Dterjwl Compressed air requirement 7 bar Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm CE marking

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit Nsdjzdzmkopfx Agrowl 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing Nwsdpfxob Uhvuo Agrol -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1000/H1200 mm -Weight: 600 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12-2DF -Power: 3/4.4 kW -Voltage: 220/380/380 volts Nodpsb Uhvwjfx Agrewl -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1000 mm -Weight: 300 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x motor Perske -with long shaft Nwedpfsb Uhvpox Agrsl -Motor type: KNS 70.12/2 D1 -Power: 3.0/4.4 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -1x motor Perske -with long shaft -Motor type: KNS 70.14/4D1 -Power: 3.7/6.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2850/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/1300/H1400 mm -Weight: 550 kg

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Nwedpfx Ajzl S Nfegrsl Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Njdpfx Aoytgn Togrjwl

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Nsdsb Uhvtjpfx Agrswl -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz Speed: 2870/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1250/1350/H600 mm -Weight: 400 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70/12 -Power: 3/4.4 kW -Voltage: 220/380 volts Nsdob Uhvbjpfx Agrowl -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1300/H550 mm -Weight: 290 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Nedpfezku Rpox Agrjwl Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide Nwedpfob Uhvqsx Agrjl -1x engines Perske -Motor type: KNS 70.12/2.DF1 KNS 51.15.20 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/1100/H1200 mm -Weight: 625 kg

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Njdpfxezq Ab Ne Agrewl Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos Nsdpfx Aegy Da Ssgrowl -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Nedpeq Ulh Hofx Agrjwl Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, Nwsdjzkmqzjpfx Agrel polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm Nedpfsyr Utnex Agrewl _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1996, Make: KGM Type: SK560 No.: 96-1600-1 Year: 1996 Nedpszl Tuvjfx Agrjwl Cross-cut saw with a large cutting capacity; features hydraulic feed for the saw guard and discharge arms, and a pendulum-action saw blade; suitable for heavy, long workpieces such as glulam beams, etc. TECHNICAL DATA Infeed conveyor: 6 meters, 600 mm rollers Cross-cut saw with hydraulic power unit Cutting capacity approx.: 200 x 600 mm (height x width) Outfeed conveyor: 8 meters, 600 mm rollers + additional 2-meter conveyor section Power: 400 V, 50 Hz, 3-phase

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) Nodpfx Aoy Snwnsgrjwl - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Nwedoyuyb Nopfx Agrsl Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 0-341-73-4415, functionality: fully functional, operating hours: 4,522 h, power: 7.5 kW (10.20 HP), cutting width (max.): 3,200 mm, saw blade diameter: 310 mm, saw blade bore: 60 mm, overall weight: 5,000 kg, TECHNICAL DETAILS Maximum cutting width: 3,200 mm Maximum cutting length: 3,200 mm Saw blade projection: 65 mm Maximum feed speed: 60 m/min Programmable pusher speed forward: 25 m/min Programmable pusher speed backward: 60 m/min Saw carriage speed: 60 m/min Manual crosscut stops: 4 units Saw blade bore diameter: 60 mm Maximum saw blade diameter: 310 mm Scoring unit bore diameter: 45 mm Scoring saw blade diameter: 150 mm MACHINE DETAILS Control: CADmatic 5 Main saw motor: 7.5 kW Operating hours: 4,522 Nwsdoy Ai Upepfx Agrjl Dimensions & Weight Transport dimensions: 8,000 x 2,400 x 2,000 mm Transport weight: 5,000 kg EQUIPMENT Intelliguide optical LED guidance system 1 air table 2,100 x 650 mm with roller elements 2 air tables 1,800 x 650 mm with roller elements 21.5-inch touchscreen CAD Plan 4 optimization software Clamping fixtures: 50, 250, 450, 1200, 2000, 2700 mm Scoring saw unit

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : Nwsdpfx Ageixz A Eorel (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces Nwedpfezulu Tjx Agrol - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)