Used Hydraulic Hot Forging Press for sale (28,552)

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories Prsdpfegrkigex Anyob It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm Prodsu Nfmyopfx Anyeb table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Prsdpfsz Hbd Sjx Anyjb Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. Psdezqhdiepfx Anyjrb All information is provided to the best of our knowledge and is subject to verification.

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm Pedpfeu Nfudsx Anysrb surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm Podpfx Aeu Nfq Ejnyjrb ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Pedpfxsu Nfvuj Anysrb dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of insolvency: Hydraulic press brake, Promecan Type RG 35 - 15 Year of manufacture 1978 Pressing force 35 tons Bending length 1500 mm Throat depth 200 mm Predpfx Anoz En Uneysb Stroke 100 mm L/W/H 1700/1040/2000 mm Weight 3 tons Tools included Drive power 3.5 kW Price: EUR 2,750.00 plus VAT, ex works

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Psdpfx Anszt H U Ssysrb Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm Predpfx Ajw D Awmjnyob max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Podpfszt H T Iox Anyorb After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. Predjxna Uzjpfx Anyeb hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920 Pjdsvbdpyspfx Anyerb

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Prjdpezypd Nofx Anyob Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: used, Year of construction: 1966, Technical details: pressure: 16 t distance between columns: 450 mm stroke: 350 mm Prsdsz Dgczopfx Anyob total power requirement: 3 kW dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Prjdpfez Hbcuox Anysb Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m Psdpjx Uru Nsfx Anysrb

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons automatic opening with timer pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 Pjdpfx Anozwphpoysrb ability to set separate temperatures for the plates daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: used, functionality: fully functional, Year of construction: 2014, USED 150T HYDRAULIC PRESS BRAKE, SAHMATO AP1520-150. Prsdezh Em Aepfx Anyob

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel Pedpozz Hg Dsfx Anyjrb – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: excellent (used), Catalog number 8114 TECHNICAL DATA - Working length of the shelf: 3070 mm - Working width of the shelf: 1030 mm - 4 working stations - Max. thickness of bonded components: 150 mm - Automatic rotation - 6 hydraulic cylinders per working station - 3 pressure plates per working station (from the front) - Overall dimensions (L/W/H): 5200x2450x2600 mm - Weight: approximately 6000 kg Pjdpfx Anoz Earrjyorb ADVANTAGES - German-made - 4 working stations - Rotatable - Used machine, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 630 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 900 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition, available for sale from a stamping shop that is being closed down in Poland. Modernized in 2016. Features a new Simatic S7 control system and a new electrical cabinet. Psdpfx Aov E Rihsnyorb Optical barriers have also been installed.

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-works: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressing force 45 tons Table 1000 x 1000 mm Prodpfxszwucls Anyeb Stroke 300 mm Drive 7.5 kW Weight 6 tons 4 guide bolts of the upper ram are broken. These would need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 2,000.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm Predpfxeztfbwe Anyjb -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Prsdpfju Nfuqox Anyjb Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *