Used Injection Cylinder for sale (9,773)

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Driving force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clearance (h x v): 710 x 710 mm Todoxu Uvaspfx Ahmjc Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-pallet clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inches) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 28926

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Tedpfx Asz Eimfohmoc Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Todpfxszy I Rzo Ahmsc Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. Tjdpfjq Nd Rbjx Ahmsc When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: used, Year of construction: 2000, operating hours: 130,000 h, functionality: fully functional, overall weight: 22,000 kg, We are offering this used ENGEL ES 2050/300 HL injection molding machine, manufactured in 2000, for sale. Type: ES 2050/300 HL Machine No.: 40505 Tsdpfsz Hvviex Ahmjc Year of manufacture: 2000 Weight: 22,000 kg Operating hours: 130,000 For sale: Engel ES2050/300HL (EUR 10,000) and Wittmann W753 (EUR 10,000). Together for EUR 19,000. Production continues until January. Inspection and collection possible at the end of January. Location: 7343 Neutal, Austria.

Condition: used, Year of construction: 2016, Machine No. 14, Serial No. 238835, Arburg Selogica control system, clamping force 2,500 kN, screw diameter 45 mm, handling system, manufacturer Arburg, type Multilift Select, year of manufacture 2016, travel distances X/Y/Z 700 x 1,200 x 2,400 mm, safety enclosure, handling robot, manufacturer Kuka, type KR10R1100, year of manufacture 2016, serial no. FA2686, 2 conveyor belts, manufacturer Schuma, L/W approx. 2,000 x 800 mm. Tedsz H N H Ispfx Ahmsc

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Tedpfx Ajtyyvwehmec Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector force: 80,000 N, ejector stroke: 180 mm, plate length: 860 mm, plate width: 570 mm, total length: 6,300 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 14,200 kg, Clamping force: 200t Year of manufacture: 2007 Injection shot weight: 562g Injection unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 ccm Injection shot weight: 562 g Tool clamping system 200/... Clamping force: 200 t Tool plate dimensions: 860 x 570 mm Ejector force: 80 kN Ejector stroke: 180 mm Tool height: 400 mm Opening stroke: 750 mm Maximum distance between plates: 1150 mm Weight: 14200 kg Dimensions (m) length x width x height: 6.3 x 1.9 x 2.3 m Equipment: - 2 x hydraulic cores on the moving platen Tsdpez Hmm Ejfx Ahmec - pneumatic valve - robot - 8-zone hot runner system - 8-section rotameter

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Tedpfx Ahez H N Ncsmec

Condition: used, Year of construction: 2004, operating hours: 34,124 h, This BATTENFELD HM 8000 / 4500 + 4500 BM will be auctioned off online as part of our industrial auction / machine auction, which involves the liquidation of the inventory of a well-known toy manufacturer – injection molding machines, storage equipment, and logistics accessories – STEP 3. Tjdpfx Ahjz H Sixsmsc You can find this and many other items on our platform.

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Tsdpfx Ahsz H Rc Demjc

Condition: used, Battenfeld plasticising cylinder Ø 18 mm, IU60 vertical- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 18.03 mm centre: 18,01 mm outlet: 18,02 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalstroke volume: 22,9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548 Dition: gebraucht Tedjrr Efrepfx Ahmsc

Condition: used, Year of construction: 2006, operating hours: 18,985 h, functionality: unexamined, machine/vehicle number: 513426, clamping force: 400 kN, injection pressure: 2,292 bar, overall weight: 2,600 kg, input frequency: 50 Hz, input voltage: 400 V, This FERROMATIK MILACRON K-TEC 40 injection molding machine, manufactured in 2006 with approximately 19,000 operating hours, will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories - STEP 3". You can find this and many other items from the field of injection molding and plastics technology, warehouse and conveyor technology, as well as workshop equipment on our RESTLOS auction platform. Tedpfx Ahsz Erx Remsc Machine details: including peripherals installed on the machine Year of manufacture: 2006 Clamping force: 400 kN International size: 400H-265 Injection pressure: 2292 bar Displacement: 99 cm³ Weight: 2,600 kg Reported operating hours as of March 10, 2025: 18,985. The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated.

Condition: used, Year of construction: 2006, operating hours: 5,000 h, functionality: unexamined, machine/vehicle number: 61007689, overall weight: 5,400 kg, input frequency: 50 Hz, input voltage: 400 V, This KRAUSS MAFFEI KM-100-380CX injection molding machine, manufactured in 2006 with approximately 4,700 operating hours (as of 03/2025), will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories – STEP 3". You can find this and many other items from the fields of injection molding & plastics technology, warehouse & conveyor technology, and workshop equipment on our RESTLOS auction platform. Todpfxoz Erz Sj Ahmjc Machine details: including all peripherals installed on the machine Year of manufacture: 2006 International size: 380 CX/100 Own weight: 5,400 kg Reported operating hours as of March 10, 2025: 4,704. The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated. as pictured basically without any other items basically, functionality is untested.

Condition: used, Year of construction: 2005, operating hours: 130,948 h, functionality: fully functional, machine/vehicle number: 155136, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production cycle. Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It is a robust design from a reputable manufacturer, ensuring reliable and precise operation. The machine can be inspected by prior arrangement. Technical documentation is available. Todpfx Ahsz Enu Iomec Assistance with organizing loading is provided.

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Todpfxevfxwts Ahmoc Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Tedpfjzza Egox Ahmsc Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2001, Order No. 20, Serial No. 184934, control system, manufacturer Arburg, closing force 1,000 kN, screw diameter 35 mm, handling system, conveyor, manufacturer colortronic. Tjdoz Hl Eyopfx Ahmoc

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Todpfxoz Hl H Rs Ahmoc

Condition: used, Year of construction: 1998, Order No. 1, Serial No. 174518, Control system, Manufacturer: Arburg Selogica, Clamping force 1,000 kN, Screw diameter 35 mm, Handling system, Manufacturer: Wittmann, Type Primus 14-0227, Control cabinet, Protective enclosure. Todpsz Hl Dpofx Ahmsc

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Tedpfjtyy Sfox Ahmjc Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: like new (used), ENGEL barrier screw with mixing elements, used only once or twice for sampling with polypropylene (PP). Tsdpfez H Sfgsx Ahmjc All accessories shown in the pictures are included in the purchase price.

Condition: excellent (used), Year of construction: 2004, operating hours: 88,926 h, functionality: fully functional, machine/vehicle number: 194501, clamping force: 600 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, overall weight: 2,930 kg, Equipment: documentation/manual, We are selling a very well-maintained 370C. The machine is connected to the power supply and can be inspected at any time. Tedpfx Ajz Dq I Uehmoc 1x core pulling unit, hydraulic, Drop-off switch, Handling interface EM67

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine Tedpfjztz D Uex Ahmoc A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm Tjdpfxozvgk Es Ahmsc The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.