Used Intermediate Coating for sale (3,398)

Condition: used, Year of construction: 2020, mileage: 1,294 km, power: 55 kW (74.78 HP), first registration: 10/2022, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: automatic, total length: 4,157 mm, total width: 1,350 mm, total height: 2,160 mm, number of seats: 1, Equipment: air conditioning, all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Aebi Schmidt Flexigo 150 municipal vehicle with sweeping attachment including container + water, winter service equipment with spreader attachment and snowplow blade (Vehicle 444) First registration: 14.10.2022 1,294.7 operating hours Engine: 2,216 cc 55 kW / 75 hp Length: 4,157 mm x Width: 1,300 mm x Height: 2,160 mm Permissible total weight: 3,500 kg Unladen weight: 2,150 kg Payload: 1,350 kg TÜV (technical inspection): 10/2027 Tires: 255/65R16, front approximately 50% tread, rear approximately 40% tread Air conditioning Flexigo 150 chassis Perkins 404J-E22TA engine, 4 cylinders, 55 kW / 75 hp, 4 cylinders, diesel Permanent hydrostatic all-wheel drive Guedpfxsz Rkt Ss Aqgoh Comfort cab with middle seat including heating, ventilation, and air conditioning Operating armrest with joystick and 4.3" graphics display Water tanks: 200 L including filling connection Storz C-coupling, suction pipe Backrest tilt adjustment, lumbar support, seat heating, armrest, seat occupancy sensor Adjustable headrests, automatic seat adjustment to the driver's body weight ISRI comfort driver's seat, air-suspended Radio with Bluetooth and hands-free system, USB connection, MP3 player Integrated rear-view camera including 7-inch color display Rear monitoring with infrared night vision camera + TFT monitor in cab Additional suction shaft camera with infrared night vision and LED work light Transport speed: 40 km/h Hydraulic pressure regulation for front lift Lubrication strip block Adapter mounting triangle, Category 0 Water system HD/system, return water hose, detachable, with coupling, for better flushing Tires as all-season tires 255/65R16 with alpine symbol including fender extensions Sweeper attachment Multigo Series 74-1-062, production 2020 Sweeping material container 1.5 m3 and circulating water system, container made of high-quality, rust-free aluminum High-dump emptying 1,600 mm, 200 L circulating water Suitable for sweepers and grass collection Multi-purpose separation sieve for efficient dirt and grass separation Deflector plate with rubber coating (wear protection) Hydraulic quick-change coupling (faster coupling), single-lever operation Stand for removing the sweeping attachment container (tipping trailer) Rear impact protection with 55 mm spacing LED work lights at the rear of the sweeping material container, shovel and broom holder Sweeping unit: 2-brush system (drawn) including suction shaft Sweeping width: 1,190 - 2,400 mm, brush diameter: 900 mm Suction shaft with interchangeable function (attachment and removal) Hydraulic coarse dirt flap on the suction shaft Stepless brush speed adjustment 0-150 rpm Dust reduction by 2 water spray nozzles per disc brush Automatic impact protection, hydraulic tilt adjustment for brushes on the right Body spreader Schmidt Stratos S06-15L, Series S2S34787, production 2020 Spreader superstructure Stratos S 06-(12) with 0.6 m3 container Screw conveyor Protective grille 40x40 mm Folding roof stainless steel Drive via vehicle hydraulics Multi-fast coupling set Control system Evolution Classic EC Spreader plate "350", 2-6 meters Spreading control via LED lamp (red or white) Intermediate frame for Multigo 1.4T Stainless steel front cover Multigo 4 support legs, 1.4 tons load-bearing capacity, crank drive in the center R

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C Gsdpfjx H Tadjx Aqgsuh - Siemens PLC control panel

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. Gusdpszxh E Ajfx Aqgeh The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: Gsdpjyw Nxksfx Aqgouh The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Guedpfxexf Silj Aqgoh Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: excellent (used), Year of construction: 1992, SSI-Schäfer mezzanine platform, 30 x 50 m, approx. 4,410 m², 3 levels Load capacity: 250 kg/m² Scope of supply: Mezzanine levels bolted onto foundations + complete shelving system + transport and conveying system + galvanized stairs + complete documentation, including structural calculations and photos Complete documentation Overview plans for levels 1, 2, and 3 Pallet layout plan Anchoring plans Cross-section drawings Longitudinal section drawings Overview plan of the conveying system, 3 levels Structural calculations Gusdpfx Aqsz Hc Ncsgjh Steel structure of the mezzanine Columns HEB 180 Columns HEA 120 Beams IPE 140 Columns bolted onto foundations Galvanized stairs Floor Span panels, entire area, 38 mm thick Decommissioning begins on December 1, 2026.

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Gusdpfx Aeztc Tdeqgsh Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) Gedpsz Ry Ncefx Aqgsuh discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Year of construction: 2019, condition: used, LAS coating system, Erlaser Clad, year of manufacture 2019. Gjdpfjzvwc Ssx Aqgsuh

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size Godjk Dpp Sjpfx Aqgsuh - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Gujdpfx Aqozugqisgsh Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Guedpfx Aezumxmoqgeh Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Gusdpfx Aqeyvau Esgoh

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Guedpfjyvav Nex Aqgsh

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and surface finishing sanding machine, Heesemann, Type: FGA 6 For intermediate sanding of painted surfaces, wood smoothing, and sanding of foils. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness max.: 3-80 mm Conveyor bed with individual conveyor belts Drive: 2.5 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min, adjustable Units: Brush roller unit: Centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Infinitely variable, electronic control of the sanding belt speed via frequency converter Wear-free braking system Pneumatic belt tension Intermittent belt extraction system Belt control: Infrared Sanding belt runs in the opposite direction Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3 – 12 m/s Drive power: 11 kW Gusdoya I Iuopfx Aqgoh Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar Distance between guide rollers: 40 mm Pneumatic belt tension The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Workpiece vacuum clamping system: Fan with drive power 5.5 kW Operating side and terminal: left Operating voltage: 400 V; 50 Hz Space requirement: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Subject to changes and errors in technical data as well as prior sale)

Condition: good (used), Year of construction: 2021, functionality: unexamined, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2021 2-roller application machine for applying oil With the Cosma roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden material, scaffolding wood, and wall decorations. Working width: 400 mm Gsdpszzdivjfx Aqgeuh Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height display Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Guedpsy Al T Isfx Aqgoh Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) Gujdpfozlwm Ajx Aqgjh * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: used, Year of construction: 2014, - Manufacturer: Cefa/Sorbini - Model: SMARTCOATER MF-EVO - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Coating roller: rubber hardness ~ 50 - 60 Shore - Coating quantity: ~ 4-50g/m2 - Coating roller diameter: 250 mm Gjdpfx Asz Ehq Nsqgsuh - Metering roller diameter: 173 mm - Metering roller with switchable reverse operation - Double diaphragm pump: 1 piece - Transport system with conveyor belt - Compressed air connection: 6 bar - Machine is mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Control cabinet is mounted on the rear of the machine - Voltage, frequency: 400 / 50 - Voltage fluctuations max. +/- 5 %

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Gsdpfx Aoxa Hx Reqgeuh Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Gjdpszg Tpvjfx Aqgsuh Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Guedpfxjzg Tpps Aqgsh Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. Gusdpfxow Ek Nte Aqgjh The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: excellent (used), HELMUT FISCHER X-ray fluorescence measuring device / film thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for film thickness and material analysis Godpfxez Egi Ro Aqgouh For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive film thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional layers, anti-corrosion layers, and various metallic coatings, and is used in quality assurance, laboratories, research, and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive film thickness measurement Suitable for functional layers and anti-corrosion layers Large measuring chamber with C-shaped slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Power connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Additional accessories as shown in the pictures Areas of application: Film thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is sold explicitly as is and without warranty. The table shown in the photos, as well as other items not explicitly mentioned, are not part of the sale. Due to its size and weight, shipping can be arranged via a freight forwarder. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Guodpfx Aqjzd Rrcjgoh Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.