Used Khs Atmosphärischer Füller for sale (186)

Condition: used, Year of construction: 2007, Overview Dkodpfez Hb Scox Akmeu This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview Dkjdpoz Hckmofx Akmeu This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Dedpfx Asz Hbxiekmoku Available immediately. Location: Belgium.

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s Dsdpszvfbcofx Akmeku - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 Dsdpoz H U Ttjfx Akmeku 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Djdpfx Ajychaiekmjku Year of manufacture: 1998 Complete machine documentation – several folders.

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data Djdpfx Aey Tt H Dekmsku - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Dkjdpfoyv H Iyjx Akmeu

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 Dksdpfx Akjtraaaemsu EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: ready for operation (used), functionality: fully functional, Complete line for filling and packaging wine bottles. Dkedpfx Ajyn I Tmekmou For a full description, see the attached PDF file.

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h Dkodpfxozwxu Sj Akmou - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data Dsdpozzz Ivofx Akmsku - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Djdswqz Nnjpfx Akmeku Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line Dkjdozlqu Tjpfx Akmsu - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Dodpfx Aoyx I Awjkmeku - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 1992, Overview Dodpfjzlqu Hsx Akmeku This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 1984, Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Dkodpfeztx Uwsx Akmsu Operation / Control: Siemens S7-300 Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Condition: used, Year of construction: 2004, Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  - Capacity: Up to 26,000 bottles per hour - Working direction: anticlockwise - Formats: - 330 ml Longneck glass bottles - 330 ml Steinie glass bottles - 330 ml Swing-top glass bottles - 500 ml NRW glass bottles - Label positions: - Front (up to 2 labels) Dkjdpfewhwwvsx Akmsu - Back (up to 1 label) - With a Siemens S7 control - New HMI touch panel in 2019

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Dkedpfx Akszi Alxsmeu Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 Dedewv Trlopfx Akmeku - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: used, Year of construction: 1984, A carousel system for cleaning the inside of and filling kegs. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Formats: 20 l-, 30 l- and 50 l-keg-barrels (DIN and Euro) Base construction: rotary Features: 4 cleaning heads, 1 filling head Dedpoztyyzefx Akmjku

Condition: used, Year of construction: 2003, Labelling machine for wrap-around belly labelling of 0.5 and 1.0 l PET bottles. The paper labels are glued to the bottle with hot glue. Additional title: wrap-around labelling Capacity: 24000 b/h Current: 18 A Voltage: 400 V Dsdpfxex T Arps Akmoku Frequency: 50 Hz Formats: PET bottles, 0,5 l, 1,0 l, 1,5 l Running direction: left -> right Operation / Control: Simatic S 7-300 Material: stainless steel housing Position: free standing Base construction: rectangular, enclosed machine, on spherical feet Features: housing with viewing window, labelling module for wrap-around paper labels, Robatech hot melt melter Periphery: Leibinger Jet 3, best-before date printer

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Dkodpoxhd Apefx Akmou Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine

Condition: used, Year of construction: 1992, Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data - Capacity: 30,000 litres/hour - Application: Carbonated mineral water - Configuration: Carbonator with pumps, tank, and accessories - CO₂ rate: max. 8 g/litre - Drive: Siemens S7 Scope of Delivery Dodpfxjzavp Hj Akmsku - Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system - Pump system  - Tank | KHS  - Control system | Siemens | S7 

Year of construction: 2001, condition: used, Crate washer for PETCYCLE plastic crates Additional title: Crate cleaning system Capacity: 2950 crates/h Power: 18 kW Dsdpfx Asx T Avnokmoku Current: 38 A Voltage: 230/400 V Frequency: 50 Hz Length: 7300 mm Width: 1570 mm Height: 1710 mm Weight: 1900 kg Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Running direction: transverse Material: stainless steel Position: free standing Base construction: Self-supporting machine housing in block construction on spherical feet Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,