Used Kistler Component for sale (7,589)

Condition: ready for operation (used), ThyssenKrupp Liftequip VVVF converter CPI 32 / 6619 00 3121_L SN: 1095720, used, good condition, 100% functional, scope of delivery as per photos Bdjdpfx Ajxah Ugeklsf

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 SN: 12932146 – with test report, professionally overhauled and fully tested with 3 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective core must not have mechanical damages such as breakages, as these cannot be repaired. In such cases, an additional invoice of €1,000 including VAT will be issued. Attention: You are bidding on an inverter from Heidenhain, Heidenhain UVR 150D 390 421-01 SN12932146 as an exchange service, professionally and completely overhauled and tested with 3 months warranty, 100% functional, delivery contents as per photos. In both the repair and exchange procedures, your returned unit must not show any mechanical damage such as breakage, as these are irreparable. Otherwise, a subsequent charge of €1,000 incl. VAT will be made. Bdsdpozqxwmjfx Aklsf

Condition: ready for operation (used), Siemens 6EW1811-8AA Installation Power Supply, A5E00079830, E-Stand B, SN Q6N2327473, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfozqxwtsx Akledf

Condition: ready for operation (used), Siemens 6EW1811-8AA, built-in power supply, A5E00166828, E-Stand F, SN Q6W4850410, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfx Akjzqxwyoledf

Condition: ready for operation (used), Bosch SPM 17 spindle module SN:345272, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. Bedpfxex Eqy Ej Aklsdf

Condition: ready for operation (used), Siemens SIMODRIVE 6SN1124-1AA00-0DA1 LT module, SN: T-U62066251, Version: D, used, good condition, 100% functional, scope of delivery as shown in photos. Bjdjx Eu I Hopfx Aklodf

Condition: ready for operation (used), Siemens 6SN1124-1AA00-0EA1 LT module SN:ST-U62061132, professionally fully overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Bodpfx Akjx Dxlkjlodf

Condition: new, OTT-JAKOB IS-40-B1-1.0 built-in clamp, unused in opened original packaging, 100% functional, delivery as per photos Bdsdjx Et Swjpfx Aklsf

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container – Swivel arm extension 800 mm Bdodpfx Akszq S Ifjljf – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Condition: new, Leuze Lumiflex safety light curtain CT 14-600 / 561106, compact transmitter / sender + CR 14-600 / 564106 receiver / receiver, serial number: 5044403, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bdjdpfezp Tpbox Aklef

Condition: new, ProMinent DGMA330T010 Flow sensor, serial number: 2011115558, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Bjdpfx Akozp Tphslodf

Condition: new, Rittal CM 5120500 control cabinet, serial number: Dimensions: Width / Height / Depth: 1000 / 1200 / 400 cm, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Bodpfx Akszp Tpnoljdf

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle Bjdpfx Akswm Iy Eolodf The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: ready for operation (used), Micro-Epsilon optoNCDT laser distance sensor ILD2300, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdsdpfozp Az Tex Aklef

Condition: ready for operation (used), Knoll KTS 25-38-F-G screw spindle pump, 200725147, serial number: 333422, used, in like-new condition, 100% functional, scope of delivery as shown in the photos. Bjdpfxezp Az Hj Aklsdf

Condition: ready for operation (used), SMW Autoblok 80/32 VSNC clamping cylinder, part number 33094311, serial number 2285, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdjdpjzp A Adjfx Aklef

Condition: excellent (used), Year of construction: 2010, operating hours: 79,008 h, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 2,000 g, mold height (min.): 250 mm, plate length: 795 mm, plate height: 795 mm, total length: 6,000 mm, total width: 2,000 mm, overall weight: 10,950 kg, Arburg 570A-2000-170 two-component hybrid injection molding machine with sorting flap (243) Bdsdpfjzq A S Iex Aklof with sorting flap Number: 243 Availability: in stock Year of production: 2010 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Closing force [kN]: 2000 Column spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Min. mold height [mm]: 250-550 Control type: Selogica Tongue: English, German Working hours [h]: 79008 Weight [kg]: 10,950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air valve: x5 Core string: 1x

Condition: ready for operation (used), Junker W08/0535 – Workpiece spindle, construction type: 81.000581 for BUAJ 31, professionally and completely overhauled and tested, 100% functional. Scope of delivery as shown in the photos. Bdsdpfxszpcwbe Aklef NOTE: Please request separate quotes for packaging and shipping costs!

Condition: ready for operation (used), Schmalenberger ZHT02 32-08/2 (50Hz) SN: 2018005883/20 with ATB CNF 90L/2D-11S+E3 / 1710 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdodpszpcwusfx Akljf

Condition: new, Alfa Laval M6-MFG plate heat exchanger, 30107-39734, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate pricing for packaging and shipping! Bdjdpfezpcv Djx Akljf

Condition: ready for operation (used), Knoll TSK40-21/30558 pump, part number 200511775, serial number 271359, with AM 100L AA2 motor, serial number 491439, used, in like-new condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Bodszpcwhjpfx Akledf

Condition: ready for operation (used), NOP FELQ-8T motor-driven trochoid pump / oil pump, serial number: 0219581, used, in good condition, 100% functional, scope of supply as shown in the photos. Bdodpfx Aozpcwneklsf

Condition: new, Chiron 1122242 / 562 006 HSK-A63 clamping gripper SN: 9F08 with 5721028100 / 95281 tool arm 1088539/00 CW49/15, unused, 100% functional, scope of delivery as per photos. Bdsdszpcv Rjpfx Aklof

Condition: new, ABB MFE190-04UN-06A0-2 servo drive, serial number W182260104, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bedpfx Ajzn D T Iokljdf

Condition: ready for operation (used), Heidenhain TE 425D control panel ID: 315 468-02 SN: 8930570, used, with minor signs of wear, 100% functional, scope of delivery as per photos. Bodpfsy Nqt Tjx Aklodf