Used Krauss Maffei Km-100-380Cx for sale (34,822)

Condition: as good as new (ex-display), Year of construction: 2025, KraussMaffei KM 651-6100 GX hydraulic injection molding machine LRX 250 robot Year of manufacture: 2025 TECHNICAL DATA Manufacturer: KraussMaffei Year of manufacture: 2025 Clamping force: 6500 kN (650 tons) Machine type: hydraulic injection molding machine Robot: KraussMaffei LRX 250 Kodpo Aaxp Sefx Ag Asdu CLAMPING UNIT Clamping force: 6500 kN (650 t) Mold opening force: 455 kN Platen dimensions: 1660 × 1530 mm Tie bar spacing: 1200 × 1020 mm Mold opening stroke: 1450 mm Minimum mold height: 450 mm Maximum mold height: 1000 mm Maximum platen clearance: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140/70 kN INJECTION UNIT Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Injection shot weight: 2391 g (HDPE) Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed: 147 rpm Plasticization rate: 102 g/s Nozzle closing force: 166 kN ELECTRICAL AND HYDRAULIC SYSTEM Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap 6: 3.3 s / 840 mm Dry cycle time according to KraussMaffei: 2.9 s / 600 mm Oil tank capacity: 1435 l DIMENSIONS AND WEIGHT Machine length: 10,190 mm Machine width: 3030 mm Machine height: 2510 mm Net weight: 38,500 kg KRAUSSMAFFEI LRX 250 ROBOT Manufacturer: KraussMaffei Model: LRX 250 Type: linear robot, 3-axis Payload: below 25 kg (including gripper and part) X-axis – stroke from mold: 900 mm Y-axis – vertical stroke: 1000/1000 mm, telescopic Z-axis – transverse stroke: 2500 mm Axis drives: servo motors Vertical axis: equipped with a motor brake Part removal side: opposite to the operating side

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment • Handling: Wittmann robot system • Model: W743 Kdodpfx Agoyyxc Ds Aou • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, KRAUSS MAFFEI 1000 INJECTION MOLDING MACHINE Brand: Krauss Maffei Model: KM 1000 - 8100 MX Clamping force: 1000 tons Plasticizing capacity: 144 g/s Injection volume: 5453 cm3 Screw diameter: 115 mm Horizontal column spacing: 1400 mm Vertical column spacing: 1150 mm Platen width: 1960 mm Kdjdezg Uzyspfx Ag Aou Platen height: 1710 mm Minimum/maximum thickness: 500/1200 mm Year: 2006

Condition: excellent (used), Year of construction: 2021, operating hours: 5,646 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, plate length: 670 mm, plate height: 670 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KraussMaffei KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Technical Data - Clamping Unit Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data - Injection Unit Screw Diameter: 40 mm Injection Volume: 201 cc Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3 m x 1.6 m x 2 m Total Weight: 3900 kg Equipment 3 freely programmable inputs and outputs Screen text: German Screen text: Polish CEE socket 16A CEE socket 32A Increased ejector force Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Kodpjz Ayi Uofx Ag Aodu Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Schuko socket 10A

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Kedpfx Aex Hz I Nsg Asdu Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system Kjdpfeymn Rvox Ag Aodu - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) Kjdpfenh Rnusx Ag Asdu - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: used, Year of construction: 2006, For sale: KM-200-1000 machine with removal robot, year 2006. The machine is in well-maintained condition and has been serviced by KraussMaffei. Kdodpfxexurcwo Ag Aeu

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Kdsdpfx Agsz Ipm Ro Asu Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. Kdodpfez Iplyex Ag Aou It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Ksdpjzvm Dlsfx Ag Aedu Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Kjdsz Ipm Depfx Ag Ajdu Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Kdedpfxeymn Nfj Ag Aju Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric Machine / Production line with the Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Kdodpez Ipprsfx Ag Aju Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Mold size: 1110x1030 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core puller x 2 on the side of the fixed mold platen Hydraulic core puller x 3 on the side of the moving mold platen Control system with hot runner system x 10 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 5-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z, B-rotation; Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Safety package for robot Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt at an additional cost Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m All machines offered will be started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Kdjdpfeza Uuzox Ag Aeu Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and weight Parameter Value Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Screw diameter: 85mm Ksdpfow Avafjx Ag Asdu Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Opening stroke: 1600mm Tie bar distance: 1120x1000mm Platen dimensions: 1600x1530mm Clamping force: 8000 kN

Condition: used, Krauss Maffei drop-out changer, height 410 mm- height 410 mm - removed from Krauss Maffei KM 200 Ksdpsrr Efnsfx Ag Aodu - removed from running machine - fully functionalmanufacturer: Krauss Maffei Dition: gebraucht

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) Kedpfx Agszinanj Ajdu • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Operating hours: 80,228 h Clamping force: 160 tons Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Kdodpfx Aszkqf Ajg Aou Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Ksdpfx Ajy T Hd Nog Ajdu Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Kodpfx Aez Iqnijg Aodu Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Kdodpfsz Ipltsx Ag Aeu Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Ksdpfx Agjz Ipnbe Asdu Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Kdsdpozvmpnofx Ag Aeu Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Kjdpfx Agezrgfhj Asdu Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m