Used Lifting Hot Stamping Machine for sale (82,554)

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert Bledpfx Adjyi Hpco Ajg connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10

Year of construction: 2001, condition: used, functionality: unexamined, Edgebander for mouldings using hot stamping method MAKOR type DORA 7, year of manufacture 2001 Bjdpfxjytc E Us Ad Aslg

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: Bedpoyzt D Eefx Ad Ajlg · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product. Bljdpfx Adjh A Hbxs Asg

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Blsdpfx Ajn Smg Tjd Aog Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: new, Year of construction: 2026, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery -35% OFF PROMOTIONAL machines in prompt delivery CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Bedpfoh U A Uaex Ad Aelg Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints transom and mullion for optional glue or nail holes Bedpfobnnwqex Ad Aolg Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: approx. 106 kg

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles Bedpobnnwfjfx Ad Aolg punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: 108 kg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Bodpfsvz Hvvjx Ad Ajlg Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Bljdpfsvz Hvijx Ad Aeg Weight 90 kg Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Bedpfx Adjvz Hvpo Aslg Total power requirement 0 kw

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spraying systems. Insulation of the complete plant included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm Empty weight: approx. 300 kg Bedpsdz Dy Hefx Ad Aelg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapour extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical centre) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved. Blodpehl H Uuefx Ad Asg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units Bsdpfx Adjtzlzaj Ajlg 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central Bjdpfsh N Di Dsx Ad Aelg - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: good (used), Oropress Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular Oropress hot stamping machine manufacturer, manufactured in Germany. Description The Oropress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a sliding function, adjustable embossing depth, and a hot plate with a thermostat. Specifications: Heating temperature adjustment Hot plate pressure mechanism: mechanical Press force: 1000 kg Power consumption: 500 W Bsdpfx Adeyur Ego Ajlg Power supply: 230 V Machine weight: 100 kg Plate size: 130 x 100 mm.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 4 pcs. Standard slide units Bedpfeyn Rg Aex Ad Aelg 1 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units Bljdpjl D N Hvjfx Ad Aeg 3 Standard slide units Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm Bljdor D N Eqspfx Ad Asg output: 10 - 250/min

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 635 SV refurbished acc. CE Standards 6,35x70 mm. 360 ppm Available with RF system to produce semitubular parts. - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl HBR will provide at total revision. Bljdoh N Dh Ajpfx Ad Aeg

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Bljdpfx Adoynuuds Aeg

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Hot Foil Stamping Platen / Heidelberg GTP Hot Foil Stamping Platen, Year 1963 - Serial No. GTP 61634 Min. format: 85 x 102 mm Max. format: 340 x 460 mm Bjdpfx Ajyk Siqsd Ajlg Speed: min. 1,500 sph – max. 4,000 sph Punching pressure: 60T Weight approx. 2,250 kg Complete with tools and accessories, including chase/frame Price on request Available immediately

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Bodsdzqltopfx Ad Aelg Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling capacity in steel ST 60: 65 mm Bljdpsyk Dp Nofx Ad Aeg - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Blodpfjyb Tc Hjx Ad Aog Weight: approx. 2000 kg No documentation available.