Used Lighting for sale (18,082)

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Lasdoyyzxhopfx Ammsc Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Lsdpfx Amjzcphzjmjac Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). Ljdpfxoy Dcu Ee Ammsac FCA D-71263 Weil der Stadt – loaded onto truck

Condition: excellent (used), Optical data coupler (28559) Laedpsuphhfefx Ammsc Make Leuze type DDLS 200/120.1-60 used from machine dismantling

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Ljdpfxetwn E Uj Ammeac Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available. Laodpfezavzvjx Ammjc

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Manufacturer: KEYENCE Model: VL-500 Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 Lasdpfxoy U Ngcs Ammsc 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Laedpfx Amsd N Sv Nemsc

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. Laedou Nigkjpfx Ammjc i.D. *

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. Lajdpfxou Nigwo Ammec *

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Laodpfx Amsy Dtpmsmec ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A Lasdpfx Asy Sup Dsmmec 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: Lsdpfsy Sumvox Ammoac 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: used, Suspended crane system, DEMAG type KBK 1 Year of manufacture: approx. 2000 Single-rail suspended crane with single-rail crane bridge Lightweight crane system made of KBK modular system profiles Lajdpohrkrtofx Ammjc Load capacity: 125 kg Span: 5 meters Distance between longitudinal travel rails: 4.1 meters Total length of longitudinal girders: 12 meters Girder profile for transverse bracing: KBK1 Girder profile for longitudinal travel rails: KBK1 Consisting of: 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) 1 unit of travel carriage for crane suspension 2 units of double travel carriages for the longitudinal travel rails 10 units of screw claws for crane suspension or ceiling mounting (without girder clamps) 6 units of end caps suitable for the KBK1 travel rails

Condition: good (used), Approx. 1,500 Pick-by-Light display modules/modules, used: Price per unit ex-works: only €15 (net)! The aluminum plug-in rails may also be available for purchase if you are interested! Manufacturer: KBS Type: PTF-L-6-VAR00 Year of manufacture: unknown Condition: good Available: immediately Laodpsv Rgn Djfx Ammec Location: Lunzenau warehouse

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 656 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 656 mm, construction height: 80 mm, TAF item number: 1000003848 Manufacturer: TAF Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,970 x 656 x 80 Width incl. side panel in mm: 656 Side height in mm: 70 Conveyor length in mm: 2,820 Conveyor width in mm: 600 Substructure: none Support roller axle type: spring axle Support roller diameter in mm: 50 Lajdpfoxq Egbsx Ammjc Support rollers per axle: 1 support roller Material: plastic Roller pitch in mm: 90 Drive: gravity Net weight in kg: 29 Special features: - Condition: used, fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 555 mm, total height: 80 mm, total length: 1,450 mm, conveying length: 1,450 mm, construction width: 555 mm, construction height: 80 mm, empty load weight: 22 kg, TAF item number: 1000005918 Manufacturer: TAF Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,450 x 555 x 80 Width incl. side panel in mm: 555 Side height in mm: 70 Conveyor length in mm: 1,450 Conveyor width in mm: 500 Conveyor height in mm: 80 Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: spring axle Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: plastic Drive: gravity Net weight in kg: 22 Condition: used / fully functional Lsdpsyddu Ejfx Ammsac Function test: OK

Condition: like new (used), functionality: fully functional, Model D2: Measurable sheet sizes: 100 - 1600 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Built-in glare-free illumination: 3 fluorescent tubes (174 Watt) Voltage: 220 V - 50 Hz Ljdpoya Hflsfx Ammjac Exterior dimensions in mm: 1775 x 1150 x 220 Weight (without iron frame): ± 86 kg

Condition: like new (used), Year of construction: 2022, operating hours: 1,635 h, functionality: fully functional, WINDSHIFTER: Separation of LDPE from the light fraction of SDS. Infeed material belt width 800 mm. Rotary air separator with a capacity of 17,000 m³/hour. Power 17.2 kW. Equipped with filter model BF104m. SDS: Single-drum separation system. For MSW separation. Infeed belt length 2750 mm, width 800 mm. Expansion room 6000 x 2400 mm. Power consumption 32.2 kW. Dimensions 11460 x 2400 x 6770 mm. Laodey Smwaopfx Ammjc

Condition: used, functionality: fully functional, mileage: 270,000 km, power: 102.97 kW (140.00 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 2,760 kg, maximum load weight: 665 kg, overall weight: 3,500 kg, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 3, total length: 6,315 mm, total width: 2,190 mm, total height: 3,230 mm, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,240 kg, loading space length: 3,635 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, compressor, cooling unit, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, This light-duty truck with both freezer and refrigerated compartment in the cargo box is equipped with a new engine installed in our workshop and therefore has 0 km on the clock. Furthermore, the vehicle is in very good mechanical condition, though it has some bodywork damage. The vehicle can be inspected at our premises. Laedpsy Ny Duofx Ammsc

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm Ljdpfx Ametuch Eomoac equipped as standard with: - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Year of construction: 2017, condition: excellent (used), functionality: fully functional, RayTRX R42 – Professional 3D light-field camera with 42 Megaray sensor performance and up to 10 MP effective resolution. Condition: Used, fully functional, well maintained. Optionally available with accessories (power supply, mounting bracket, software license on request). Technical Highlights: - Sensor: 42 Megarays, CMOS, BSI - Resolution: up to 10 MP effective - Frame rate: 7 FPS at full resolution - Interfaces: USB 3.0, GigE, PCIe - Weight: approx. 71 g - Dimensions: 39 × 39 × 28 mm - Applications: Machine vision, microscopy, research, VR/AR, quality assurance - Software: Raytrix SDK/API, compatible with Windows 10/11, CUDA, OpenGL Special Features: - Post-capture focus adjustment - Extended depth of field via patented microlens array Lsdpfx Asxtbh Tjmmjac - Compatible with NVIDIA RTX GPUs - Winner of the Red Dot Design Award [red-dot.org] Pickup in Porta Westfalica by prior arrangement. Contact: Sascha Biskup SCM, Porta Westfalica

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm Laedjv R Dxaspfx Ammjc RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Ledpfx Ajy H Dmnjmmeac Misc. accessories MARCELS MASCHINEN AG

Condition: used, functionality: fully functional, KEYENCE CORP GL-R24H-T + GL-R24H-R. Items sold in pair. Price is for pair. Model #: GL-R24H-T + GL-R24H-R Lajdpsyu S Nrofx Ammjc More Information: Safety Light Curtain Supply: 24VDC 24x Optical Axes Detection Height: 460mm Detection Distance: 0.2m - 15m Detection Capability: 25mm Diameter Output: PNP/NPN 500mA Connection: 12-Pin