Used Ligmatech Vkv 710/25/11/R for sale (81,759)

Condition: used, mileage: 26,000 km, power: 206 kW (280.08 HP), first registration: 09/2001, fuel type: diesel, empty load weight: 13,000 kg, maximum load weight: 12,000 kg, overall weight: 25,000 kg, tire size: 315/60R22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, cabin, central locking, crane, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, registration no. house, 1x comfort seat, seat heating, rear window, ABS (anti-lock braking system), retarder, power take-off, automatic, lifting+lowering, differential lock, fog lights, work lights, rotating beacon, air suspension, low-noise G1, last axle hydr. steered, container lock, folding U-protection, side aluminum driving protection, roof hatch, crane behind house, emergency stop, grapple control, foldable, rotator control, 2-point outrigger hydr, radio remote control, 3x hydr. extensions, red environmental badge Wheelbase: 4200 mm Body: 18 t Meiller RK 18.65 roll-off system (built 1991) for containers up to 6.5 m in length with DIN locking and hydraulic adjustable underride guard. HMF 1113 K3 (year 2000) loading crane with 3-fold hydraulic extension, grab control and radio. Transmission 5HP-590 automatic, 6-cylinder engine, K-cab! Power take-off: ZF for HP automatic transmission, engine-dependent, output speed = 0.97 x engine speed, direction of rotation left (like engine), max. 700 Nm, suitable for continuous operation, installation position top right, direct pump drive, output flange 120 mm diameter (8-hole)! Load diagram: 4.3m 2300kg, 6.1m 1550kg, 7.8m 1170kg, 9.6m 930kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Nwjdpfx Aovhm Thjkujg

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Njdjrq Dmrspfx Akujwg Working height from the ground 835 - 960 mm

Condition: used, machine/vehicle number: 008147, Max. panel width: 1100 mm Nodpfxjxqm Hio Akuowg Max. panel length: 2500 mm Length of conveyor: 8100 mm Panel return for edgebander: Right

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 2,000 kg, fork length: 1,150 mm, Fork positioner ISO class: ISO class 2 = 1,000 - 2,500 kg Nedpow Erfpefx Akujwg Condition: Ready for use and fully functional Technical condition: good Description: Year 2015 ISO 2 Capacity 2,000 kg Width 700 mm Forks 1,150 mm ID OS1635

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Nodpfovg Iqxex Akuowg Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, Number of boring spindles 5 St. Working width 250 mm Working height 160 mm Nwedpfx Ajw R S T Askuog

Condition: used, mileage: 269,140 km, power: 132 kW (179.47 HP), first registration: 04/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, sliding door, = Additional Options and Equipment = - Dual passenger seat - Third brake light - Front electric windows - Euro 6 - Driver's airbag - Remote central locking - Cruise control - Wooden loading platform - Reversing camera - Side sliding door - Twin rear doors - Partition wall without window = Further Information = General Information Number of doors: 5 Cab type: single cab Registration number: VVN-11-R Technical Information Number of cylinders: 4 Engine displacement: 1,968 cc Front axle: Steered Weights Curb weight: 2,103 kg Payload capacity: 1,397 kg Gross vehicle weight: 3,500 kg Condition Nedpsyt Ixaofx Akuswg General condition: average Technical condition: average Visual condition: average

Condition: like new (used), Year of construction: 2017, operating hours: 186 h, load capacity: 2,500 kg, lifting height: 4,350 mm, fuel type: electric, mast type: triplex, construction height: 2,170 mm, Manufacturer + model: LINDE R 25 Mast: 3F4350 Nwsdpfxjy Itlpo Akusg ID: 25106.2245 Category: New Mast: 3F4350 Lowered height: 2170 mm Lifting height: 4350 mm Capacity: 2500 kg Year: 27 Hours: 186 hours !!!! Battery capacity: 48 v / 930 ah - manufactured 10 / 2023 Options: FULL cabin!! LINDE steering - Duo pedal!! Heated CABIN!! Wipers front & top & rear!! Cabin height = 2170 MM (+ beacon 140 MM) Complete in NEW condition!!!

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. Nwsdshpuhtspfx Akujg MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Nwjdpfxoxl Elgs Akujg

Condition: used, machine/vehicle number: 275/70 R 22.5, first registration: 11/2005, color: other, Year of construction: 2005, 275/70 R 22.5 TIRES WITH RIM 10 HOLES 3 TO 15 MM Nodpfx Aexwkh Dekuswg

Condition: used, Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm Nwsdpfx Aedki N Uskujg -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm Nedpfxoxaa Ths Akuewg morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 1 1/4" inch -4x cutting tips: 1/2" 3/4" 1" 1 1/4" inch -Number: 1 set available - Price: per set -Dimensions: Nodpfxjc Txars Akujwg -Weight: 6.6 kg

Year of construction: 2013, condition: good (used), SICA-TRS-SY 25-160 R, PLANETARY TUBE SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES Nodpfx Aevn A R Nekuowg With chip extraction fan Minimum diameter 25mm Max diameter 160mm Year of construction 2005 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Nwodpfxjv Eguys Akuog Available: March / April 2025.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 1204197, functionality: fully functional, pressing force: 125 t, stroke length: 120 mm, table width: 700 mm, table length: 1,100 mm, hole diameter: 52 mm, ram adjustment: 100 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Press force: 1,250 kN Speed range: 30 - 250 rpm Ram stroke: 8 - 120 mm Ram adjustment: 0 - 100 mm Ram bore diameter: 52 mm Table dimensions: 1,100 x 700 mm MACHINE DETAILS Controller manufacturer: UNIDOR Drive power: 35 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 2,400 x 3,300 mm Machine weight: 12,000 kg EQUIPMENT Nwjdoy D Nnlepfx Akueg Decoiler, diameter approx. 1,200 mm Workshop drawer cabinet with clamping devices External reference: 68

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Njdpfx Aey Ur Hljkuswg Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Max. panel length: 2500 mm Nwsdpfx Akst Hmppsueg Panel return for edgebander: Left

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Njdpfx Ajwuuc Askuewg Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: ready for operation (used), Kuka 1FK7100-5AZ91-1ZZ9-Z servo motor, serial number: YFVN50665142002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwsdsy T Uqkjpfx Akusg

Condition: ready for operation (used), KUKA 1FK7034-5AZ91-1ZZ9 - Z-axis servomotor, Z = S09, SN YF A350 8072 50 022, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nsdpfx Aksy T Upaeujwg

Condition: ready for operation (used), Kuka 1FK7105-5AY81-1YY3-Z servo motor, serial number: YFVD50670449010, used, in good condition, 100% functional, scope of supply as shown in the photos. Nedpfx Akjy T Urhjuewg

Condition: ready for operation (used), Kuka 1FK7105-5AY81-1YY3-Z servo motor, serial number: YFVF50670454, used, in good condition, 100% functional, scope of delivery as shown in the photos. Njdpfjy T Urnjx Akuswg

Condition: ready for operation (used), Kuka 1FK7101-5AZ91-1ZZ9-Z servo motor, serial number: YFVN50667476003, used, in good condition, 100% functional, scope of supply as shown in the photos. Nwodpfx Akjy T Uqwsuog