Used Lorenz Brm50/1720.21-Wd-Sw-Zw for sale (2,384)

Condition: used, Discharge take-off table: - total length 7850 mm Gusdpsxuiq Eefx Abfsf - total width 1200 mm - four upper hold-downs - prism guide 70 mm - hydraulic feed

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm Guedpfx Abexuipbjfof - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: used, Cross Conveyor: - total length: 7000 mm Gedpfexu E E Esx Abfouf - total width: 2300 mm - feed motor power: 0.75 kW - trimming saw for material - saw motor power: 2.2 kW - max. saw blade diameter: 350 mm - cutting height: 80 mm

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system Godpfx Abozbt D Defouf AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 S/N 1591356 Year of manufacture: 2023

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Swap Body Turntable Trailer – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Additional 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Spare wheel holder for 1 spare wheel including wheel fastening kit, basket design Guedpsi Riz Hsfx Abfof Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension BPW disc brake axles Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit WABCO EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Electrical System 24 V electrical system 4 × three-chamber rear lights 1 round reversing light 1 round rear fog light Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Fliegl ZWP 180 Standard – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Swap Guard – swap body positioning guide, mounted in front of and behind each container locking point 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Side underrun protection positioned further inwards for optimum clearance to swap body support legs Steel rear underrun protection Shortened underrun protection for optimum clearance to swap body support legs Guodpfx Aoi Ri Dzobfsf Protected installation of the lighting system Quarter fenders at the front and half fenders at the rear Without rear impact protection Spare wheel holder in basket design Plastic toolbox Drawbar Drawbar length: 2,200 mm Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Brake release function via push button on the vehicle next to the raise/lower valve, allowing brake release when coupled (EBS power supply must be ensured) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Equipment Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder Warning board according to ECE R70 Foldable ADR warning board at the rear ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21801006610, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Fliegl ZWP 180 Standard – 2-Axle Swap Body Trailer Weights and Dimensions: Gross vehicle weight: 18,000 kg Payload approx.: 15,380 kg Axle load: 18,000 kg Unladen weight (basic version): approx. 2,620 kg +/- manufacturing tolerance Overall length with 7,450 mm swap body: approx. 9,470 mm Overall width max.: 2,550 mm Frame height lowered: approx. 1,180 mm Frame height raised: approx. 1,380 mm Frame height driving position: approx. 1,260 mm Support height: approx. 1,220–1,320 mm Standard front stop to front locking point: approx. 800 mm Locking distance: 5,853 mm Coupling height: approx. 800 mm Drawbar length (adjusted): approx. 2,200 mm Free drawbar length from front stop for 7,450 mm swap body: approx. 1,970 mm Support heights apply on level ground. Note: Steering through is not possible in lowered position. Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Gujdpozlfwcjfx Abfjf Quick-release connection for Anti-Ice system at the front Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container twist locks with heavy-duty outriggers on 20" base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at front and half fenders at rear Without rear impact protection Spare wheel holder for 1 spare wheel including wheel fastening kit Drawbar Drawbar with certified 50 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension Disc brake axles (manufacturer’s choice) with 430 mm brake discs Air suspension Braking System Dual-line air brake system Air reservoir capacity: 208 litres Spring parking brake Duomatic connection at front with connecting line to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: Trailer may only be operated with towing vehicles ensuring ABS functionality Raise/lower valve with holding function in raised and lowered position Brake pad wear indicator via EBS CAN bus signal (display in cab, truck preparation required) Axle load detection via EBS CAN bus signal (display in cab, truck preparation required, not a calibrated scale) Tyre pressure monitoring system via EBS (truck preparation required) Additional air connection front left at container cross member for Anti-Ice system Wheels & Tyres 385/65 R22.5 tyres Polished aluminium wheels, Speedline Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED licence plate lighting Note: Certain towing vehicles may display incorrect fault messages although the system is functioning correctly. 2 LED white front position lights 2 LED red/white rear outline marker lights 1 × 15-pin front connector with connecting cable, including power supply for Anti-Ice system on swap body Additional rear LED work light, activated via reverse light Additional front LED work light centrally mounted between the chassis beams, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on sides and red reflective strips at rear Paint Finish Chassis: RAL 9011 Graphite Black

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Guedpjzldqhjfx Abfjf Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm Gjdst Hwr Uspfx Abfsuf table length 600 mm table width 400 mm total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Guodpfx Ajt Hww Debfof Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 Gjdpfx Aot Hw Hxsbfjuf total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1973, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7000 kg Guodpfx Abet Hw Hlofjf

Condition: used, Year of construction: 1997, x-travel 500 mm y-travel 350 mm z-travel 350 mm total power requirement 15 kW weight of the machine ca. 6 t Gedet Hwqdjpfx Abfsuf dimensions of the machine ca. m

Condition: good (used), Year of construction: 1989, CNC Surface Grinding Machine Machine type: Elb Schliff SWDE 012 NPC-K Year: 1989 Gsdpfszi Antox Abfouf SPECIFICATIONS max. grinding length: 1.500 mm max. grinding width: 900 mm max. Arbeitshöhe mit neuer Schleifscheibe: 800 mm max. Arbeitshöhe bei abgenutzter Scheibe: 880 mm Max. workpiece weight: 1.000 kg statisch kg Max. Table Load: 1.500 kg/m dynamisch kg grinding wheel-Ø: 500 mm Grinding wheel width : 100 mm Table size: 1.500 x 740 mm Equipment paper band filter Nassschleifeinrichtung EL.-Geraden-Abrichtapp Querklemmung grinding spindle taper: Konus 75 magnetic plate: 1.500 x 900 kein Rundtisch

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and Godonbdyaepfx Abfouf adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 8-20 mm -Outer diameter: Ø 32 mm -Cone: Ø 40 mm -Cone length: 15 mm Guodpfx Ajb A Rx Tobfsf -Weight: 6 kg

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm Gjdog Sxyvspfx Abfsuf -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories Gsdpfxsyk Ahwe Abfjuf -Filter holder: Type FH 143/149 -Accessory case: with extensive contents -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 8-20 mm -Outer diameter: Ø 32 mm -Cone: Ø 40 mm -Cone length: 15 mm Gjdeb A Rx Uepfx Abfeuf -Weight: 5 kg

Condition: used, Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier Guodpfxjf Tdtrs Abfsf -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, total height: 3,300 mm, overall weight: 12,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, This 4-axis SW BX 621 horizontal machining center was manufactured in 2013. It features a robust SINUMERIK 840D sl CNC control system and dual liquid-cooled motorized spindles, each offering up to 6,000 rpm and 26 kW power. The machine supports a maximum tool diameter of 115mm and a tool length of 300mm, with a rapid traverse speed of up to 60 m/min. Ideal for precision machining, the SW BX 621 machine we have for sale. Contact us for more information. Additional equipment • Liquid-cooled motorised spindle in AC synchronous technology Machine Benefits Technical Machine Benefits • Swivelling table (a-axis): direct-driven, horizontal nc rotary table with counter bearing • Max. Fixture / workpiece dimensions: Ø 630 mm x 1420 mm • Max. Fixture / workpiece weight: 600 kgmax. Fixture / workpiece weight: 600 kgmax. Fixture / workpiece weight: 600 kg • Spindle arrangement: horizontal, side by side • Spindle distance: 600 mm Extra Information Machine still under power Dimensions Gsdjzh Uqdjpfx Abfsuf Machine Depth 5800 mm

Condition: good (used), functionality: fully functional, Multiblade Foiler WD FR8 with centering device 2x floating saws maximum saw blade distance 550 mm maximum cutting height 165 mm maximum clearance: width 880 mm x height 180 mm central lubrication system hydraulic roller lifting system feed speed continuously adjustable in the range of 0-250 m/min centering conveyor at the entrance to the machine full hudraulics Gedeqwgy Nepfx Abfeuf strong solid body robust line not afraid of challenges

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. Gedpfx Aoziwr Hobfjuf The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Guodpfx Abjzhlfrefof Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller Guodpozf N Ekefx Abfjf or belt conveyor