Used Macc Special 390 A for sale (71,688)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R22,5, color: grey, Year of construction: 2021, The images are archive photos. The vehicle may still be in use! Chassis Semi-Tipper Fine-grain steel welded construction, lightweight design, fifth wheel with replaceable 2" kingpin Curved front panel "Patented" 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without sliding compensation 2x wheel chocks with holder Side underrun protection made of aluminum Underride guard, foldable 6x half-shell mudguards Integrated "mudguard holder" surface repels stones 2x anti-spray mud flaps on the last axle only 2x tow hooks at rear Axles & Suspension SAF disc brake axles Axles in off-road design "Laser-measured axle/chassis" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start aid, operated by "braking 3x" (start aid functions up to 30% axle overload and maximum speed of 25 km/h) Kdedpfoy Rlvrjx Agpsl "Hot-dip galvanized lift axle mechanism" with 10 years’ warranty against corrosion Brake System 2-line compressed air brake system Color-coded tubing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS by Haldex, electronic braking system with EBS socket at the front, without connection cable Note: The trailer must only be towed by vehicles that guarantee ABS functionality! Including raise/lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres, brand at manufacturer’s discretion 6x steel rims, brand at manufacturer’s discretion Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body (Tipper) Aluminum box-type body made of high-quality, wear-resistant material Inclined front wall 5 mm thick, with external cylinder mount Side walls made of 30 mm hollow chamber profiles, fully welded, with bulk-material-repelling top rail profile. Inside with access steps on front wall (not available with Cramaro configuration) Shovel and broom holder outside on front wall Greenline – conical and aerodynamic body shape "Membrane" tailgate Tailgate as swinging flap with "double joint hinge", externally mounted with dual hook locking mechanism Tailgate with rubber seal Floor throughout 5 mm thick, Brinell 110 Note: Only suitable for transporting sand, gravel, and pebbles with a maximum grain size of up to 20 mm! All other goods are excluded from warranty! Roll tarpaulin can be stowed on right-hand side, with central lock on left-hand side Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent corrosion by materials The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within axle/support/saddle load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Paint finish

Condition: ready for operation (used), Heidenhain UVR 140D Power Supply Unit ID: 390 281-01 SN: 26241696T – supplied with test protocol, professionally and fully overhauled and tested, comes with a 3-month warranty, 100% functional, delivery contents as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not exhibit any mechanical damage such as breakages, as these cannot be repaired. In such cases, a subsequent charge of €600 incl. VAT will apply. Attention: You are bidding on an inverter from Heidenhain UVR 140D ID: 390 281-01 SN: 26241696T in exchange (exchange service), professionally and fully overhauled and tested with a 3-month warranty, 100% functional, delivery contents as per photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as breakage, as these can no longer be repaired. In this case, a subsequent invoice of €600 incl. VAT will be issued. Kdedpfx Agsy Nrr Dspel

Condition: ready for operation (used), Heidenhain UVR 140D ID: 390 281-01 SN:21409900P – with test protocol, professionally overhauled and fully tested, 3 months warranty, 100% functional, scope of delivery as per photos Kodpfx Agey Nrr Rjpsdl

Condition: ready for operation (used), Heidenhain UVR 150D Power Supply Unit ID: 390 421-01 SN23575632P – includes test protocol, professionally fully overhauled and tested, with 3 months warranty, 100% operational, scope of delivery according to photos. Please note: In the exchange process, your defective core must not have any mechanical damage such as fractures, as these can no longer be repaired. In such cases, a subsequent charge of €1,000 incl. VAT will apply. Attention: You are bidding on an inverter from Heidenhain, model UVR 150D ID: 390 421-01 SN23575632P, as an exchange item (exchange service), professionally fully overhauled and tested, with 3 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange processes, your defective core must not show any mechanical damage such as breakage, as these are irreparable. Otherwise, a follow-up invoice of €1,000 incl. VAT will be issued. Kdjdpfxoy Nrule Agpel

Condition: ready for operation (used), Heidenhain UVR 140D power supply unit ID: 390 281-01 SN: 26241696T - with test report, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Kdedpfx Ajy Nrthogpjl

Condition: new, Heidenhain TTR ERM 2048 A04 1R graduation drum. 390 925-04 SN:27185453, unused, 100% functional, scope of delivery as per photos Kdodpfx Asi Eazmsgpjl

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 11 390 618, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% fully functional, scope of delivery as shown in the photos Kjdpfx Agox Erudepodl

Condition: ready for operation (used), Heidenhain UVR 140D ID: 390 281-01 SN:21409900P – supplied with test protocol, professionally fully overhauled and tested, with 3 months warranty, 100% functional, delivery contents as shown in photos. Attention: When using the exchange service, your defective core must not have any mechanical damage such as breakage, as these are no longer repairable. In such cases, a subsequent charge of €600 incl. VAT will apply. Kjdpfxoy Nrtbj Agpedl

Condition: used, mileage: 470,073 km, power: 382 kW (519.37 HP), first registration: 01/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,300 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Scania R520 Flatbed Truck + ATLAS 390 Crane 6x2 Suspension: Air-air Wheelbase: 5.10 m ATLAS Crane Type: 390 : 2-A5 5x Hydraulic extensions 4x Hydraulic stabilisers 1x Remote control Kdsdpsy I Exnsfx Agpel Flatbed Length: 6.30 m Width: 2.55 m Height from ground: 1.16 m Features: - Digital tachograph - 1x bed - Cooler box - Seat heating - Electric windows - Sunroof - Sun visor - Trailer hitch (2x air-ABS-power connections) We are happy to support you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: like new (used), Year of construction: 2020, operating hours: 1,647 h, load capacity: 3,500 kg, lifting height: 220 mm, fuel type: electric, mast type: simplex, Manufacturer + model: JUNGHEINRICH EJK 335 Drum forks / Spreader!!! ID: 26062.6948 Category: Used Mast: 1F220 Forks: 1150 mm Kodpfx Asy Itqljgpsdl Capacity: 3500 kg Year: 2020 Hours: 1649 hours Battery: 24v / 375Ah Options: SPECIAL build!!! Drum roll / Spreader - forks!!! Distance between support legs: 1400 mm Truck width over support legs: 1740 mm Power steering

Condition: excellent (used), mileage: 1,450,349 km, power: 368 kW (500.34 HP), first registration: 12/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 9,270 mm, total width: 2,550 mm, Year of construction: 2006, Equipment: retarder, = Additional options and accessories = - Intarder = More information = General information Cab: single Registration number: BS-NS-27 Technical information Number of cylinders: 8 Engine capacity: 15.607 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Lift axle Weights Empty weight: 13.365 kg Carrying capacity: 14.920 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Kdsdpfxoywynvs Agpol Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Pedax Special 32 S, Used Machine Manufacturer: Pedax Type: Special 32 S Overall dimensions: Kdedpfx Agoy R A Sdspel Width: 1090 mm Depth: 720 mm Height: 850 mm Weight: 391 kg Electrical data: 400 V; 6 A Maximum bending diameter: Ø 32 mm (single bar, for 450 N/mm² steel grade) Bending angle adjustment: Infinitely variable disc adjustment system Control system: Foot pedal operation

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Special 32, Used Machine Manufacturer: Peddinghaus Type: Special 32 Kedpsy R A Niofx Agpodl Overall dimensions: Width: 660 mm Depth: 850 mm Height: 830 mm Weight: 325 kg Electrical data: 400 V; 7 A Bending capacity: max. Ø 32 mm (single bar) Bending speed: approx. 10 rpm Motor power: 2.2 kW Control system: Automatic bending angle adjustment, foot pedal start

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type Numerical Control Type ?? / Software Biesse Works N. 1 Working table with N. 10 supports ATS (L = mm 1800) Automatic Tools Changing System (Store /14 folds-positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 290 Useful working area (X - Y - Z) in edge banding mm 5780 x 1650 x 60 N. 2 Working areas n. 1 Vacuum pump (capacity m3/h) 250 Front emergency carpets - Motorized carpet to evacuate the wastes from the working process Total power installed KW 31.13 Working group (top): N. 20 Independent vertical boring spindles N. 8 Independent horizontal boring spindles N. 1 Circular Saw N. 1 Vertical electro-spindle HSK F63 (Kw 13,2) Edge Banding group on board, with Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 4 reels) Kdjdpfxey Nk R Es Agpel

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Ksdoin Eztspfx Agpsdl CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1020 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. Kdedpfsin Ezdsx Agpsl DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system Kjdpfxjin Uile Agpedl - oil mist - any size of the working table

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles. Kodpfjirmgfox Agpodl

Condition: new, Year of construction: 2026, 1012 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Kjdpfxjin Ewze Agpedl WORK AREA: The usable area of our machine tool is 1000 x 1200 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. Kdjdpfx Agjin Eqfjpsl SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: new, Year of construction: 2026, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Ksdpfxjin Eu He Agpedl WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We offer you: Manufacturer: Deckel Maho Model: FP4M special edition Year of manufacture: 2022 Control system: Heidenhain ND 7013 digital readout Technical data: Travel distances: X-axis: 500 mm Y-axis: 530 mm Z-axis: 400 mm B-axis: swiveling ±90° (180°) Main spindle: Tool holder: SK 40 Spindle speed range – main spindle: 25 – 3,000 rpm Drive power – main spindle (100/40%): 6 kW Worktable: Table size: D 800 x 480 mm Feeds: Feed range: 6 – 500 mm/min Rapid traverse (x/y/z): 1,500 mm/min Space requirement (W x D): approx. 2,235 x 1,875 mm Machine weight: approx. 1,600 kg with worktable and milling head Technical features & accessories: - With additionally adjustable milling head on the Y-axis (130 mm) Kodpfey Hfquox Agpodl Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg colour: light grey Kdodpfx Asv N Iuisgpel

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, lifting height: 6,000 mm, fuel type: electric, Drive: Track Empty weight: 1.780 kg Working height: 800 cm Dimensions of cargo space: 227 x 96 x 214 cm CE mark: yes Technical condition: very good Kodpfx Aev D Eq Rogpsdl Visual appearance: very good Please contact Bas Sindorf for more information On stock!

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams Kdodpjy Em D Hofx Agpsl - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, 29-12-2015, 847500 km, Euro 6, 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.