Used Mahr Ms 442 for sale (2,805)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, This 3-axis MAHR Compakt 400 was manufactured in 2001. It features optical and tactile measurement functionality, allowing for precise measurement of rotationally symmetrical components. The machine includes a rotary axis with a Sanyo Denki motor drive, a 6-position probe change rack, and multiple probe configurations. If you are looking to get high-quality measurement capabilities, consider the MAHR Compakt 400 CMM machine we have for sale. Contact us for further details. Nsdpfx Aez E Hz Hji Tewn - Last Known Calibration: 2019- 4th axis: rotary axis- Included Equipment / Scope of Delivery:* 1 Screen / Monitor* Lens with 6x Ring Light* Lens with 10x Ring Light* Calibration plate with setting ring and calibration sphere (probe-to-camera alignment)* Rotary axis (with Sanyo Denki motor drive and 3-jaw chuck unit)* 6-position probe change rack (Renishaw MCR20)- Capabilities & Features:* Optical and tactile measurement functionality* Measurement of rotationally symmetrical components* Multiple probe configurations/geometries supported (straight and star probes)- Documentation: Factory calibration certificates and service reports available

Condition: used, Year of construction: 2013, machine/vehicle number: 2690/07, Mahr Perthometer PGK 120 Measuring range: 100 [x in mm] Max. load capacity: 10 kg with cross table Probe system: MFW-250 (measuring range: in z ±0.25 mm) Measuring principle: tactile-inductive Nwedpfx Aiey D Eade Ton Contact forces: 1–3 mN Probe: roughness probe (tip radius 2–5 µm, opening angle 60° and 90°)

Condition: used, Mahr Type: Helio-Pan II 700 Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Nedjzd R U Dspfx Ai Tjwn Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Njdpfx Aisz H Ukls Tjwn Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: refurbished (used), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Nwedpfxeu Dw S Rj Ai Tjn Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 350 mm, compressed air connection: 5 bar, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished MAHR Multisensor OMS 600 CNC Including acceptance certificate prior to delivery Technical data: Dimensions: 1700x1420x1800mm Weight: approx. 3300kg Measuring range: approx. 600x600x350mm Njdpfedz Szvex Ai Town Optical sensor: Camera and laser Tactile sensor: Prepared for Renishaw probe systems Max. workpiece weight on glass plate: 50kg max Max. traverse speed: 200mm/s Measuring accuracy: E1 (E2) = 1.3 + L / 400 µm, E3 = 2.2 + L / 300 µm (L in mm) Compressed air supply: min. compressed air supply: 6 bar +/- 0.1 bar Compressed air consumption: approx. 120 Nl/min Voltage supply: Voltage 230V +/- 10% Including: • CNC control • Calibration standard • Full version of OptiCheck3D 2025 software The measuring device was extensively factory-refurbished in 2025 by Profitech (Mahr Competence Center) and is used as a demo unit. Further services: Installation, commissioning, calibration, acceptance testing, training, hotline service and after-sales services, as well as comprehensive application technology support from our service center. The measuring device can also be adapted to your specific parts spectrum according to customer requirements and, upon delivery, can be equipped with ready-made measuring programs for direct use by your operators.

Condition: excellent (used), Professional digital micrometer from the renowned Mahr brand – model Micromar 40 EWR(i) – designed for extremely precise measurements with an accuracy of up to 0.001 mm. The device, in an IP65 version that is dust and water-resistant, is ideal for use in metrology, quality control, and industrial workshops. Measurement range: 100 – 125 mm Accuracy: 0.001 mm Digital display with a large, clear LCD screen Protection rating: IP65 – dust and splash resistance “ABS” and “Hold” functions – quick measurement stop and zeroing function High-rigidity body, ergonomic grip Nwedpfx Aez Slhnji Ten Includes original box, certificate, operating manual, and 100 mm measuring standard Condition: practically new / used only for testing

Condition: good (used), Year of construction: 1996, functionality: fully functional, WE OFFER AN NICE CONDITION WALTHER TROWAL WITH MAGNETIC UNLOADER. MACHINE COMES FROM SWITZERLAND FROMTHE FIRST OWNER Specifications Manufacturer CARL KURT WALTHER Model MS 600 Year 1996 Condition Used Stock Number 0074 Volume of the working tank 505 l. Volume of the pieces from 40 to 150 l. Max. dimensions of the pieces (diagonals) 265 mm Screen surface 2940 cm2 Coating thickness 20 mm Speed 1000/1500 rpm Max. power 4 Kw Max. centrifugal force 75540 N Total empty weight 1150 Kg Overall dimensions 2480x2030x1510 mm Magnetic unloader MS 600 Motor power of the transport belt 0.25 Kw Motor power of the lifting unit 0.30 Kw Speed of the belt 23 m/min Width of the belt 310 mm Nwodovk I Tbspfx Ai Ton Lifting path 260 mm .

Condition: excellent (used), Professional external micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device is characterized by high accuracy and a robust construction, and its large LCD display enables quick and convenient reading of results. Measurement range: 25–50 mm / 1–2” Resolution: 0.001 mm (1 µm) Functions: ZERO, ABS, REL, TOL Protection rating: IP65 – dust and splash resistant Power supply: CR2032 battery (3 V) Ergonomic, precise construction made of hardened steel Clear LCD display Catalog number: 4157042 Manufacturer: Mahr GmbH – Germany Included in the set: Njdpfx Ajz Slhhsi Tswn - Mahr Micromar 40 EWR-S digital micrometer - Measurement standard - Adjustment key - Documentation and operating instructions - Original carrying case Condition of the device: very good – fully functional and ready for use. An excellent choice for industrial plants, precision workshops, and measurement laboratories.

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Nsdpfxsz Duuxo Ai Tswn Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Nwedpfx Aioz Iw I As Ton

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Parts receiver Njdpfx Asz Nhq Esi Tswn Samsys Multi 3000 rod loader

Condition: ready for operation (used), Year of construction: 2012, MarSurf M400 MarSurf SD 26 Mahr roughness measuring device with evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Measuring profile memory (number of profiles): 30 ST Nodpfx Aisq Nl Ewj Tjwn New price: 11.190 € net - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to visit us for an inspection. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. Nwjdoz Dfzcspfx Ai Ten The equipment has 3 turbines.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, table load: 20 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, High-precision optical measuring device with active vibration damping for use close to production. Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Factory-refurbished premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agent, worldwide. Online - optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: - delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rent-hire purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements Measuring range of individual sensor: 250x200x200mm Measuring range of all sensors: 250x200x200mm Factory overhaul (Mahr Competence Center): 2024 Nwedpfsdzzqwex Ai Ten New Windows 10 evaluation station Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Maximum speed: 150mm/s Dimensions: 800x700x1980mm Weight of measuring device: 450kg Weight of control: 90kg High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF insert module Accuracy according to VDI/VDE 2617 Sheet6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 ####Symbolic image of the manufacturer####

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 25 mm, measuring range Z-axis: 1 mm, travel distance Z-axis: 550 mm, Well-maintained Mahr surface roughness measuring instrument SD26 with fixture for measuring shafts and axles from Messtechnik Triesen. Measuring ranges: Z = 0.8 mm (manually height-adjustable column), X = 25 mm. Machine has been completely overhauled and inspected. PC (Windows 10) and Mahr measuring software are installed. Extensive set of new replacement styli included. Includes base frame for PC and printer as well as accessories. Price for delivery within the EU. Nedpfoxddf Nox Ai Tswn

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 3 t measurement range X =: 650 mm measurement range Y =: 1200 mm workpiece weight: 700 kg traversing speed: 200 mm/s capacity: 1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Nwedpfxsvap Sko Ai Ten Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software *

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER Nwedpfxjy Twf Rj Ai Ton WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: used, Mahr 865 SE Indicator Calibrator Mahr 865 SE Indicator Calibrator with 1505 IC indicator + 1299 IC/S printer Njdeihpvhepfx Ai Tjwn Height-adjustable table You can find other indicator calibrators in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Nedpfxexbn A Ts Ai Town Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning height: 1,500 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,700 mm, feed length X-axis: 1,100 mm, feed length Z-axis: 1,200 mm, faceplate diameter: 1,450 mm, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, total width: 5,000 mm, total length: 5,500 mm, rapid traverse X-axis: 4,000 m/min, rapid traverse Y-axis: 4,000 m/min, type of input current: three-phase, rotational speed (max.): 200 rpm, rotational speed (min.): 200 rpm, spindle speed (max.): 200 rpm, table load: 8,000 kg, year of last overhaul: 2025, travel distance X-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, stroke length: 1,200 mm, disc diameter: 1,450 mm, overall weight: 21,000 kg, tool weight: 3,000 g, power of the servo motor: 40,000 W, repeat accuracy: 0.01 mm, Equipment: documentation/manual, CNC vertical lathe SC17, completely modernized in 2025 with Fanuc control. The machine is in very good condition, fully functional, live and available for inspection and testing. Technical specifications: Maximum turning diameter: 1700 mm Maximum workpiece height: 1500 mm CNC: Fanuc (complete modernization in 2025) Condition: functional, live Type: vertical turret lathe Advantages: Recent modernization - no additional investment required Reliable Fanuc control system Suitable for large workpieces Video available on request. Price on request Nwsdpfx Aeyxfgmsi Tsn

Condition: refurbished (used), Measuring head Mahr (5313320), type "Millipilot 1332B" for Höfler gear grinding machine, reconditioned. Njdpspl T D Uefx Ai Tswn External signs of use are present (light scratches, etc.), but technically the device is in perfect condition and ready for immediate use. Pickup or shipping can be organized at any time. For further questions just contact me.

Condition: used, Surface measuring instrument Mahr Perthometer S2 Nwsdezkl Dyepfx Ai Tjn Used, as shown in the pictures From stock (may have storage marks) Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Information about bank details, payment terms, etc. will be sent to you by email. W120

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Nwedey Tvtmepfx Ai Ton Available for viewing at our facilities in Semsales, Switzerland.

Condition: used, Mahr Perthen Perthometer S4P roughness measuring instrument 1 x Mahr Perthen Perthometer S4P roughness measuring instrument Nedeihfmuspfx Ai Tjwn 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50, up to 160 mm Ø More roughness measuring instruments in other sizes – new and used – can be found here.