Used Mb Conveyors Srl Manure Separator, Separator for sale (20,398)

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. Iedezc Rkwopfx Anwjic 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Iijdjzc N Rcspfx Anwjc Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. Isdpfx Anszcf Dljwsic The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. Iisdpfx Anox Dbkcewjc ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: like new (used), Bosch. U-MB 1000Kg/h Loos 10Bar. Iiodpfju I Ru Hsx Anwoc

Condition: used, mileage: 1,001 km, gearing type: other, color: black, empty load weight: 820 kg, first registration: 01/2019, Year of construction: 2019, driver cabin: other, Vehicle location: Bovenden, Capacity approx. 0.5m³, operating pressure >200Bar! Isdpfei Rp H Tsx Anweic The MB-HDS Scahufelseperator is a real all-rounder! You can process different materials with a single device and only have to change the shafts. For more information about the product, please contact us! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2019, condition: good (used), 7 units of telescopic conveyor belts, MAXX REACH, 27m total length – used: Price per unit ex works: only €18,950 (net), including loading! Price for the purchase of 3 units: only €16,950/unit (net) ex works! Price for complete purchase: only €15,950/unit (net) ex works! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of manufacture: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, extends to a total length of approximately 27m. Length when retracted: 8.80m This means the device extends approximately 18m! Width of main body: approximately 1.20m Total width approximately 1.53m plus motor on the side approximately 20cm Ijdpfx Anszcxz Rswsic 3-stage telescopic design Ideal for unloading trailers – the device can then also be positioned approximately 5 – 6m away from the unloading door, i.e. a forklift can still drive past it in the retracted state! Height: approximately 1.22m Total weight: 6,744 kg Belt width: 80cm 4.5kW, 3+N+E/V400/Hz50 Condition: good – very good, the devices were only used for approximately 9 months at Amazon! Available: immediately Location: Frankfurt a.M. area, later storage in Frankenberg / Saxony.

Year of construction: 2016, operating hours: 9,001,700 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE . Iiodoy Uk A Sepfx Anwsc

Condition: used, Year of construction: 2016, functionality: fully functional, The MB Conveyors conveyor belt is for sale: m800/1500 x 245 mm Task: 800 mm Inclined belt: 1500 mm Usable width: 245 mm Center distance: 315 mm Belt speed: 9 m/min High-quality aluminum profile, anodized, with grooves - Rubber-coated drive roller Iisdpfx Anezbxplswoc - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high, every 400 mm, temperature-resistant from -10°C to +90°C - Worm gear motor, 3 x 400 V, 50 Hz - Belt speed constant at approximately 9.0 m/min - Mobile base frame, with adjustable angle from 25° to 50°, discharge height at 25°: 650 mm, at 50°: 1,150 mm - Grounding connection - Motor protection switch with 5 m cable & CEE plug

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Current welding stamp sizes: 2 cm x 100 cm and 2 cm x 50 cm, in use since 02/2022. Iodpfxezbb Tmo Anweic

Condition: used, Year of construction: 2017, • Manufacturer: AGI Iisdowv Eazjpfx Anwec • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Lücht & Palm Type: MB Note: Due to the hot-dip galvanized finish, the racks are suitable for outdoor use. Scope of delivery includes: 16x Pallet Rack Uprights, used Material finish: hot-dip galvanized Frame profile dimensions: U 120 x 50 x 5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded truss construction) Height: 4,000 mm Depth: 900 mm 59x Pallet Rack Beams, used Material finish: hot-dip galvanized Profile: IPE 120 x 64 mm Clear span: 5,015 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 16x Frame Connectors, used Material finish: hot-dip galvanized Profile: L 40 x 40 x 4 mm Clear width: 200 mm 64x Anchor Bolts, new Manufacturer: Hilti Model: HST2RM12x105/10 Design: Stainless steel 32x Shims, used Finish: galvanized For leveling the rack uprights installed on uneven floors 01x Load Sign With field and bay load information, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Iedpjult Szsfx Anwoic Incl. mounting material Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If you require transport or shipping beyond this, additional costs will apply, which can be quoted individually depending on the delivery location and scope of delivery.

Condition: new, We offer you here a new pallet rack traverse for sale. Due to the hot-dip galvanized surface these traverses are suitable for outdoor use. Technical data of the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery: 01x pallet rack traverse, new Material colour: hot-dip galvanized IPE profile: 120 x 60 mm Execution: head traverse Iiodpfx Aehg Tkksnwsc Agraffe: 2 HK (hooks) clear width: 1.800 mm max. load per truss pair 3,600 kg, with evenly distributed load 1x set HV-set EN14399-4 - EN14399-6 10.9 Hexagon bolt with nut and washers and washers for HV-connection Material colour: hot-dip galvanized These cross beams have an upstand welded on for the for the storage of shelf grids. (Height: 40 mm / Material thickness: 4 mm)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. Isdpfx Aoyzr Nmsnweic - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Year of construction: 1996, condition: ready for operation (used), Installed power: 18.1kW, voltage: 400V, phases: 3, frequency: 50Hz, max. current consumption: 30.8A, protection rating: IP54, permissible water operating pressure: 6bar, max. water temperature: 65°C, refrigerant: R404A, refrigerant charge: 8.8kg, max. refrigerant pressure: 26bar, ambient temperature: 5-43°C, weight: 416kg, with CE marking. An inspection on site is possible. Iiedpfjzbl I Iex Anwoc

Condition: good (used), functionality: fully functional, Year of construction: 1998, Strip width: 400 - 1600 mm Ijdpozbg T Ssfx Anwoic Edge trimming width: 400 - 1580 mm Strip thickness: 0.4 - 3.00 mm Roller diameter: 220 mm Roller width: 1700 mm Manual adjustment stand Electric immersion depth adjustment Hydraulic clamping nuts with manual high-pressure pump

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Iodew Dnd Sepfx Anwjic Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 30,000 rpm, number of slots in tool magazine: 30, We are offering this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Type: basic II.S Serial number: 400-223 Year of manufacture: 2011 Includes vacuum pump and extraction system. Ijdpfey U R Syjx Anwsic If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm Iedpfx Anjdkxlkewsic - weight 325 kg - 400 volt 3 phase

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Isdswhkywopfx Anwoic

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed Ijdpfx Anou R Ulhowoic - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: OM2339002, power: 750 kW (1,019.72 HP), rotational speed (min.): 745 rpm, input voltage: 5,000 V, input frequency: 50 Hz, input current: 112 A, type of input current: three-phase, overall weight: 8,800 kg, total length: 3,200 mm, total width: 1,700 mm, torque: 9,614 Nm, type of cooling: air, protection type (IP code): IP5K5, 2 pcs. medium-voltage three-phase asynchronous motors 5000V, also available separately. Location: 44866 Bochum. Inspection and test run possible by appointment. Ijdpjy N N Szofx Anweic

Condition: good (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 8,000 mm, conveyor belt width: 800 mm, total length: 23,000 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, ID43709 MACHINE: Telescopic Boom Conveyor BRAND: FMH Conveyors Best Reach Iisdpfx Aowhdd Nonwjc TYPE: BR3150-800 YEAR: 2018 LENGTH RETRACTED: 8m LENGTH EXTENDED: 23m

Condition: good (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 800 mm, total length: 21,500 mm, input voltage: 380 V, MACHINE: Telescopic Boom Conveyor FIRE: FMH Conveyors. Best Reach TYPE: BR4140 YEAR: 2009 Iisdewhc Ugepfx Anwec LENGTH RETRACTED: 6.5m LENGTH EXTENDED: 21.5m

Condition: excellent (used), GRANULATE DEDUSTING We have 5 units available from a company liquidation. Ijdpey N R Nbjfx Anweic Granulate dedusting machines reliably minimize quality risks. The granulate deduster effectively removes fine dust, ensuring a clean and high-quality plastic granulate. This helps you reduce scrap, prevent production disruptions, and maintain consistently high product quality.