Used Mb Conveyors Srl Manure Separator, Separator for sale (20,333)

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch Itjdjxabl Sepfx Anweh - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt Itodpfxsxaatns Anwoh - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg Itodpfxsxaafqj Anwjh dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. Itedpfx Anjxrb Rfjwsh - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Isdpfxsyln D To Anweth

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V -Dimensions: 95/70/H35 mm Itedoyhnc Ijpfx Anweh -Weight: 0.4 kg

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  Brewhouse capacity: 500 L Configuration: 3 kettles + hot water tank + cold water tank + boiler Steam heated Cooling capacity: 35.8 kW Scope of Delivery  Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Air drying unit Itodpfxsyg R Dle Anwoh

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer you, without obligation, a used, self-propelled stretch/wrapping robot (pallet wrapper), manufacturer PKG, model Motion. Manufacturer: PKG SRL Model: Motion Year of manufacture: 2018 Maximum rotation speed: 93 m/min. Battery specification: Standard AGM/gel batteries 12V – 110Ah; both batteries were replaced at the end of last year. Charging cycle: 8-10 hours Pallet dimensions: minimum 500 x 500 mm, maximum unlimited Maximum wrapping height: 2,200 mm Minimum wrapping height: 500 mm Turning circle radius: 1,100 mm Electrical connection for battery charger: 230V, 50Hz Charger: High-frequency charger integrated in the machine Machine weight: approx. 400 kg Film: Type: Machine stretch film Roll diameter: max. 250 mm Isdpfx Aeyg Nyxjnwoth Roll height: 500 mm Roll weight: approx. 20 kg Note: The above technical data were taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 used stretch/wrapping robot (pallet wrapper), type Motion by PKG SRL, without film rolls. Application area and condition: The machine was used in a picking and shipping department for stretch-wrapping palletized goods. The unit is fully operational, in good condition, and can be inspected and tested under power. Both batteries were replaced at the end of last year. Remark: The machine will be available for collection from March 2026. Until then, the robot will remain in use. We would be delighted if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2021, Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible. Isdpfxewz N T Ae Anwjth

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Itedpfx Ajxcx Amonweh

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 2879, We offer this used Colussi Ermes SRL L001-027 steam-powered trolley cleaning machine (smoking/cooking) made of stainless steel, year of manufacture 2016. If you have any questions or need more information, please do not hesitate to send us a message or call us. Itsdpfxjydn Shj Anwsh

Condition: good (used), Filling quantity: 35 kg Itjdpogl Auxsfx Anwjh

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Iodpox R Arksfx Anwoth Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: used, Year of construction: 1995, Manufacturer: Ozaf srl Model: E 10 Year : 1995 Type : Elevating belt with cleats / Giraffe conveyor.   Power : 1,5 Kw Itsdox R Ap Aepfx Anwsh Equipment: vibration system Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Condition: repair required (used), Folding machine for sale. Brand: MB, type 35. Maximum paper size: 35 x 45 cm. 220 volts, 20,000 sheets per hour. The rubber rollers aren't optimal, but they still fold well. The counter isn't working. The machine also needs to be cleaned. Of course, you are welcome to test the machine with us. Isdpfx Asw N Rhvjnwsth We can arrange transport/packaging for you and load it onto a truck or into a container. Please ask for a price including transport (location: the Netherlands). Kind regards, Henk Hoos.

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Itedpfjv Hp Tnox Anweh

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Ijdpfeiidr Rjx Anwjth -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Itsdpfeiidrxox Anwoh -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm -Weight: 0.9 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Isdpfx Aneiidr Howjth -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Year of construction: 1994, condition: good (used), Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi LEA SRL. Control module from Bierrebi TA 103 automatic cutting machine. -Board: LEA SRL. Type LEA 1032 2.028.01.065.01 -Dimensions: 370/90/H28 mm Ijdoiidrbepfx Anwsth -Weight: 0.4 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02 -Dimensions: 400/100/H50 mm -Weight: 0.4 kg Itjdpjiidrqsfx Anwjh

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 Ijdpfeiidrujx Anweth -Dimensions: 360/130/H60 mm -Weight: 1,3 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Itedeiidr Aspfx Anweh -Circuit board: LEA SRL. Type LEA 1016 2.028.01.061.02 -Dimensions: 360/130/H60 mm -Weight: 0.4 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Itsdpfxsiidrmj Anwjh -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 Iedpfxeiidr Uj Anwoth -Dimensions: 265/125/H100 mm -Weight: 2.0 kg