Used Montiantonio Calender for sale (58)

Condition: ready for operation (used), Year of construction: 2022, Features: • Lamination with BOPP, PET films, etc. • Electronic control of temperature and speed • Anti-curl system for material • Automatic sheet separation • High stability in continuous production • Hot Knife Bsdpjy I A Dhjfx Ad Ajwl Technical data: Model: TLMG 50 REB 100 / 1400 Year of manufacture: 2022 Maximum sheet size: approx. 1000 × 1400 mm Minimum sheet size: approx. 300 × 300 mm Maximum speed: up to 7,500 sheets/h Heating system: Thermal oil calender Lamination type: WET / DRY Feeding: Automatic Tension system: Automatic

Condition: used, Year of construction: 1995, The VITS QRV Variocut, manufactured in 1995, is a machine with a format of 1020 mm, currently in stock and located in Germany. It features a calendar width of 1020 mm and is of the Micromatic type, capable of handling paper weights between 65 and 120 grams. The PC and cutting edge control were replaced in 2012. The machine operates at a maximum speed of 220 meters per minute with register control and includes an embossing unit from 2005. It offers a cutting accuracy of ??plusminus0.3 mm and is equipped with PC control Unico. The delivery terms are FCA. Format: 1020 mm Equipment: used shee cutter with PC control Unico Type: Micromatic PC and cutting edge control were replace in 2012 Embossing unit year 2005 Calender width 1020 mm Machine speed max 220m / min with register control Bwedpsvfx Dysfx Ad Asl cutting accuracy: +/- 0,3 mm paper weight : max. 65-120 gram

Condition: used, Year of construction: 2008, GENERAL TECHNICAL DATA: Performance Mechanical speed: up to 450 m/min Production speed: depending on substrates and adhesive system Web & Dimensions Maximum web width: 1330 mm Maximum laminating width: 1315 mm Minimum web width: 600 mm Roll Specifications Maximum roll diameter: • Unwinder: 1000 mm • Rewinder: 1000 mm Core diameters: • Unwinder: 3” / 6” (76 / 152 mm) • Rewinder: 6” (152 mm) Web Tension Unwinding: 500 N Rewinding (with taper tension): 550 N Electrical Data Voltage: 3 × 400 V ±10%, 50 Hz (without neutral) Total installed power: 85 kW Maximum input current: 120 A Main switch: 150 A Pneumatic Requirements Pressure: 6 – 9 bar Consumption: 70 l/min Feed connection: 1/2” Hydraulic System Pressure: 3 bar Cooling consumption: up to 2700 l/h Feed connection: 1/2” Cooling System Water pressure: max. 5 bar Water temperature: 15–20°C Temperature difference: 4°C Pressure difference: 2.5 bar Flow rate: 2000 l/h Machine Configuration • Shaftless unwinder (primary & secondary) • Shaftless rewinder • Automatic web guiding system • Adhesive metering system (5-roll application unit) • Laminating unit with pressure rollers • Cooling calender • PLC-controlled drive system • Touch screen control interface Materials (Supported) • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA Bodpfxjy Er A Ue Ad Aewl • PET / PETP • PP (Cast) • Paper Material Thickness Range Films: approx. 7 – 200 µm (depending on material) Paper: 40 – 200 gsm Working Conditions Temperature: 10 – 40°C Humidity: 30 – 90% (non-condensing) Additional Equipment • Optional water chiller: approx. 21 kW cooling capacity • Closed-loop cooling system possible Control & Automation • PLC control system • Inverter-driven motors • Recipe storage (up to 500 jobs) • Production monitoring (speed, meters, tension) • Emergency stop system

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Bwsdpfx Adew Tbr Hj Aol Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: ready for operation (used), Year of construction: 2019, Used coating line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift Bwsdpfx Ajy Dr Hqsd Aol - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units - Column-mounted swivel crane for loading paper rolls - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Used coating line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. Bsdpfx Adohd N Dao Ajwl The machine can be inspected on site. Condition as new. The machine has never been in serial production. Sale from place.

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V Bwsdpfxjyyw T Ue Ad Aol • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests

Condition: refurbished (used), functionality: fully functional, Used HEIDELBERG TD 78/642 folding machine, complete with VFZ knife, pallet feeder, and COMBI pockets. Various deliveries with calender (SBP-SA) available. Bedpfx Ajyzxfzsd Aswl

Condition: used, Year of construction: 2008, functionality: fully functional, Heidelberg TD112/442 folding machine, year 2008/2001, consisting of: pallet feeder with double-sheet separation head Tremat, 1st and 2nd folding units 112 with four pockets each, 3rd folding unit 78 with two pockets, stacker with calender Heidelberg SBP 86 year 2008. Bjdpfxjyzpn He Ad Aswl

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 6878, working width: 1,020 mm, total width: 2,000 mm, total length: 12,000 mm, total height: 3,000 mm, stack height: 840 mm, Laminating machine FK 102 S in very good used condition Sheet size min 30 x 45 cm Bsdpfxjxb Dq Te Ad Aswl Sheet size max 102 x 124 cm Feeder: Billhöfer A-20-P Smoothing calender: GK-4-1080 Sheet separator: Achilles BT 4.1 Stacker: Bremser S102A1 Additional equipment: pneumatic side lay by TPM electronic overlap control by PME automatic film brake by Achilles film cutting device by TPM spare roller (lamination counterpressure) new, included The machine can laminate using both water-based and thermal films (heating units required) Dismantling/transport/possible customs duties etc. must be organized by the buyer.

Year of construction: 1981, condition: excellent (used), machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill / Mischwalzwerk • Manufacturer (Components): Frank'sche Eisenwerke / Hofmann & Schwabe • Year of Construction: 1981 • Origin: Made in Germany (West Germany) • Main Motor: Emod Motoren (Herbert Odenwald KG) • Power: 45 kW • Speed: 1465 U/min • Voltage: 380V / 50Hz • Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) • Model: 10.450 SO • Ratio (Ratio): 16.4 : 1 • Output Speed (n2): approx. 89.3 U/min Bedpeyx Etgsfx Ad Aswl

Year of construction: 2007, condition: ready for operation (used), Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC. Bwjdpfsym U Dijx Ad Aol

Condition: new, Hazar Makina HM625 Transfer Printer Bwsdjq Rd Rcepfx Ad Ael Year of manufacture: 2021 Model: 600 Print width: 2000 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW Electrical consumption per hour: 18 kW Heating system: Thermal oil (even surface heat distribution) Machine control panel: 7-inch LCD PLC system Cooling system: Automatic Resistance power: 30 kW Motor power: 2.2 kW Heating time: 70 minutes Tensioning and guiding system: Automatic (pneumatically controlled linear carriage) Cylinder temperature control: Both outer and inner surfaces automatically controlled Print speed: 3-7 meters per minute Felt: Nomex Item condition: Exhibition piece Financing through our partner bank is available. komplett-konzept.leasingo.de Further printers in other sizes—new and used—can be found in our shop! International shipping available on request!

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Bodpovptbuofx Ad Aswl Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Year of construction: 1974, condition: ready for operation (used), A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible. Bwsdpfx Aewmqw Tjd Ael

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Bwsdewzx Tfspfx Ad Asl

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Bwedpewk Nldefx Ad Ael

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Bwjdpfx Adjq Ixglo Ael

Condition: like new (used), machine/vehicle number: FDL-150-100E/NC, functionality: fully functional, pressing force: 150 t, table width: 800 mm, clearance between the columns: 1,250 mm, total length: 1,200 mm, working height: 600 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. Bodpfxswpg Awe Ad Aewl • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: ready for operation (used), Loop stitching heads for calender hooks Bjdeir A Hpepfx Ad Aewl

Condition: new, Laminator 380 Plus - Automatic feeder with suction head - Infeed stacker - Automatic sheet separator - Film rewinding device (including cutting and rewinding knife) - Chrome-plated laminating roller - Touch screen - Anti curling system Bedpsr Axv Hofx Ad Aswl - Cooling fans for cooling after calendering - Stamping system including rewinder for waste foil - Hydraulic pressure of laminating roller Technical features: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 - 42 μm Film spindle axis: Ø75 mm Maximum film roll diameter: Ø340 mm Material weight: Digital printing paper: 135 - 350 g/m² (135 - 350 g/m²) Other paper: 157 - 350 g/m² (157 - 350 g/m²) Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Upper lamination roll diameter: Ø120 mm (chrome-plated and polished) Lower lamination roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC - 50 Hz Weight: 305 kg Dimensions (length x width x height): 1730 x 800 x 1480 mm

Condition: excellent (used), Insole Production Line – Clean Equipment List 🔹 Mixing Section 1. 25L Kneader Maker: Daeryunghwahan Year: 2016 Capacity: 25L Main motor: 37 kW Power: 380V / 3Ph / 60Hz 2. 14" Open Mill Maker: Daeryunghwahan Year: 2016 Capacity: 20–25 kg Main motor: 30 kW Power: 380V / 3Ph / 60Hz 🔹 Sheet Forming 3. 4 Roll Calender Maker: Shinhwa Year: 2012 Roll size: Ø300 × 850 mm Main motor: 30 kW Power: 380V / 3Ph / 60Hz 4. Cooling Drum For sheet cooling 🔹 Press Section (핵심) 5. Foam Press Maker: Taejung Year: 2016 Heating plate: 600 × 600 mm Main hydraulic motor: 15 kW Clamping force: 200 ton 6. Sheet Press (Model: XFP150-2) Maker: Taejung Year: 2018 Heating plate: 750 × 650 mm Servo hydraulic motor: 8.8 kW 7. Cooling Press Maker: Taejung Year: 2016 Cooling plate: 600 × 650 mm Clamping force: 200 ton 8. Form Press (Model: TZX-200-1-6S) Maker: Taejung Year: 2018 Frame plate: 800 × 600 mm Heating plate: 600 × 650 mm 🔹 Extrusion & Injection 9. Ø70 Extruder (Model: TY70) Maker: Shinjin Year: 2016 Capacity: 80 kg/hr Main motor: 15 kW 10. Injection Press (Model: SCVI-3.0-500ton) Maker: Shinchang Year: 2015 Heating plate: 750 × 800 mm Hydraulic motor: 22 kW 🔹 Cutting Section 11. Swing Cutting Machine (Model: DK-P2) Maker: Kukdong Year: 2016 Hydraulic motor: 1.5 kW 12. Thomson Press #1 (Model: TK-60DSA) Maker: TK Korea Year: 2017 Working size: 800 × 700 mm Clamping force: 200 ton 13. Thomson Press #2 (Model: TK-60DSA) Maker: TK Korea Year: 2017 Working size: 800 × 700 mm 🔹 Utility 14. Electric Oil Boiler (Model: FMOT-150) Maker: Taejung Year: 2016 Heating capacity: 150 kW 🔹 Finishing 15. Skiving Machine Bedpfjyl Dhuox Ad Aewl Maker: Hongsang Year: 2016 Knife motor: 2.2 kW The whole production line is available for sale.

Condition: good (used), Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Bwodpfx Ajx Ivycod Asl Height display Variable belt speed Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h

Condition: new, OMEC 3 rollers mechanical symmetrical double invitation rolling machine New "CE Made in Italy USEFUL IN WORK mm 2050 DIAMETER OF THE UPPER ROLLER mm 150 LOWER ROLLER DIAMETER mm 150 LATERAL ROLLER DIAMETER mm 150 MAX CALENDER THICKNESS 1,5 x D mm 4 MAX CALENDER THICKNESS 3 x D mm 4,5 MAX CALENDERING THICKNESS 5 x D mm 5 Bsdpegyk S Asfx Ad Aowl MACHINE DIMENSIONS : mm 920 x 3400 x 1100 TOTAL POWER INSTALLED : Kw 6,5 WEIGHT : KG 1700 The FX3-3 series distinguishes the mechanical asymmetrical 3 ROLLERS calenders with simple FULL INVENTORY. The side roller (bending roller), is assembled as standard with steel supports and bearings and on the outside bronze pads which guarantee maximum reliability and minimum friction. ensure maximum reliability and minimum friction over time. The rotation of the rollers is applied to the UPPER and LOWER rollers by means roller by means of reducer and self-braking motor, as well as the translations and the sheet metal clamping by means of motors and reducer of the best brands. reducer of the best brands. Equipped with roll hardening, motorized translation and clamping, prearrangement for mounting curved rollers and conical device conical device positioned directly in the upper roller, they are today the best compromise of absolute quality and easy easy to use by the operator for the most varied cylindrical and conical calendering processes. As standard, the upper roll is opened from the side in order to extract the rolled plate. MACHINE CONFIGURATION: MOTORIZED UPPER AND LOWER ROLL in rotation with equal power. [...]

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Bwjdpju Ttf Nsfx Ad Aol Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears