Used Mori Seiki Mt 2000 Sz for sale (10,321)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Lhjdswvrfkopfx Ammoh Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Lsdpfx Amjzcuyiemshh Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Lhsdozf H Ezspfx Ammjh Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: excellent (used), Year of construction: 2015, DMG MORI NLX 2500 MC/700 lathe, year 2015. Control system: M730M with CELOS-ERGOline. Part ejector system. Chip conveyor. Ledpfszgkdksx Ammohh 2 axial tool holders ER32. 2 radial tool holders ER32. 1 front milling tool holder. Very good condition, low operating hours.

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe 2 axes (X, Z) Model: SL-300B Year: 1998 CNC: Fanuc MSC-501 Lhsdpfx Aozd R Ikjmmeh 3-phase power Chip conveyor Documentation

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Lsdozgghfopfx Ammohh Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm Lodpfezggg Uex Ammohh X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis model 5, Z-axis model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Ljdpst Rg E Ssfx Ammshh Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability accuracy: + / - 1 sec. Pallet clamping force: 3,400 kg Workpiece weight max.: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Tool diameter max.: 110 mm Tool length max.: 250 mm Tool weight max.: 8 kg Special accessories: End-of-work indicator with alarm light Magazine for 30 tools Operating hour display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm 23626

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. Ljdpezd Nv Hsfx Ammohh * 1.5-meter Lns Quick Load bar feeder. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. Iasdbq Hnuozcdf Uepeu * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * 2 C-axes. * Bar capacity: 65 mm. Lhsdpfx Amjzd H I Temeh * Y-axis on upper turret. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight: 6.5 metric tons. * Machine available for inspection while in operation. * Immediate delivery, unless sold prior to listing.

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm Lodpfx Amjxr Rbysmshh bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 901, type of input current: three-phase, bar diameter (max.): 40 mm, collet bore: 42 mm, We are offering this used Mori Seiki SL-150S/500 CNC lathe with sub-spindle, manufactured in 1998. Manufacturer: Mori Seiki Model: SL-150S/500 Serial number: 901 Phases: 3 Rated power: 32 kVA Date of manufacture: 9/1998 Includes LNS Quick Load Servo 65 bar feeder (manufactured in 2007). Includes reducing sleeves. Includes Hainbuch collet chuck system (main and sub spindles have the same collet size for Hainbuch BZI 42). Lhodozdd Dyepfx Ammoh Includes 120x collet. Includes clamping blocks for the turret. Excludes tooling. The machine is currently still in production and needs to be replaced with a new one. The machine has been well maintained. Please note that this is a machine without powered tools! If you have any questions or would like more information, please feel free to send us a message.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Lhodpfx Amjwhkcxjmjh

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm Lhedpfozd S S Rjx Ammjh X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW Lsdpozfauijfx Ammjhh weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: like new (used), Year of construction: 2017, operating hours: 1,075 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: Fanuc, table width: 500 mm, table height: 500 mm, table load: 500 kg, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, Horizontal Machining Center DMG MORI NHX 5000, 2nd Generation Control: M730UM Celos X: 730mm Y: 730mm Z: 880mm Milling Spindle Interface: HSK63-A Lodpfxszdllwe Ammshh Speed: 20-15,000/min Power: 37 kW Torque: 250 Nm Pallets Number: 2 Size: 500x500 Load capacity: max. 500 kg Type: Grid pattern Tool magazine Positions: 60 Type: Rotary Coolant system: Knoll system, 70 bar Mist extractor The machine comes from a research institute and has only run for approximately 1075 spindle hours to date. Condition: as new Availability: short notice

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: 840 D solutionline, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Manufacturer: DMG MORI Pfronten Model: DMC 85 monoBLOCK RS3 Year of manufacture: 2014 Control system: Siemens 840D solutionline Shopmill Approx. 22,500 program hours Main spindle Interface: SK40 DIN 69871 Speed: 20-14,000 /min Spindle replaced by DMG MORI approximately one year ago Tool changer Type: Double gripper with three-phase motor Magazine: 60 positions X: 935 mm Y: 850 mm Z: 650 mm A: +/- 120° C: 360,000 * 0.001, continuous 5-axis simultaneous machining: YES Automation: DMG MORI RS3 Number of pallets in the system: 3 Additional pallets: 2 Equipment 3D measuring probe Operating mode 4 Extraction system IKZ 40 bar with belt filter system Chip conveyor Coolant gun Hydraulic clamping system Media feedthrough through the pallet Lhedpfx Amezamn Temjh WITHOUT the clamping devices and tool holders shown in the images!

Condition: good (used), Year of construction: 2007, table length: 800 mm, table width: 800 mm, Equipment: CE marking, documentation/manual, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control system: Fanuc 18 imb + Mapps 2 Year of manufacture: 2007 TECHNICAL DATA: Travel ranges: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse rate (X/Y/Z): 50 m/min. Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Number of tool positions: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Lodpfxsv Nhylo Ammjhh Machine weight: 32,000 kg Space requirement (L x W x H): 9,200 x 4,900 x 3,920 m Equipment features: Internal coolant system (ICS): bar Chip conveyor High-pressure pumps

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system 2 tables, 1100 x 600 mm Lodpfjy Ndlpex Ammjhh 40-tool changer BT40 spindle Maximum spindle speed: 20,000 rpm 2 chip conveyors

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec Lsdozczc Rspfx Ammjhh number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Lodpezcla Hefx Ammjhh Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,674 mm, table width: 600 mm, table length: 1,350 mm, table load: 1,000 kg, overall weight: 6,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,740 mm, number of axes: 3, This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details. • CNC control: MSC-504 Ledpfszc Nfasx Ammshh • Distance spindle nose to table: 150–660 mm • Tool magazine: 30 tools, side-mount ATC Technical Specification Taper Size BT 40

Condition: ready for operation (used), Mori Seiki turret head with 10 positions for Mori Seiki CL-150.200. Shank height for square tools: 20 mm, maximum drill shank diameter: 32 mm, turret indexing time: 0.7 sec, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Ljdpfx Amsx Dw Rfjmehh

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 6,000 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 310 mm, spindle motor power: 7,500 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 2,500 kg, bar diameter (max.): 32 mm, controller manufacturer: MITSUBISHI, controller model: MSC-803, product length (max.): 2,500 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This MORI SEIKI CL 150 features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm. It includes a spindle speed range of 60 - 6000 rpm and a turret with 12 stations for efficient tool management. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 150 machine we have for sale. Contact us for further details. Control Unit Defective: At least data loss or damaged circuit board (unverified diagnosis) • Swing Over Bed: 515 mm • Maximum Turning Diameter: 400 mm • Standard Turning Diameter: 176 mm • Standard Turning Length: 150 mm • Maximum Turning Length: 303 mm • Spindle Centre Height: 950 mm • Spindle Nose: A2-5 • Spindle Bore: 43 mm • Spindle Bearing Inner Diameter: 80 mm • Standard Chuck Diameter: 169 mm • Tool Size for External and Facing Tools: 20 x 20 mm • Number of Turrets: 1 • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Tool Selection Logic: Yes • X-Axis Motor Power: 1.5 kW • Z-Axis Motor Power: 2.0 kW • Manual Feed Rate: 0 - 1260 mm/min • Programmable Feed Rate: mm/rev • Rapid Traverse X-Axis: 30 m/min • Rapid Traverse Z-Axis: 30 m/min • Positioning Resolution: mm • Coolant Tank Capacity: 123 l • Coolant Pump Capacity: 13 l/min Lhsdpfszcwy Sjx Ammeh • Lubrication: Automatic Central Lubrication • Power Supply: 380 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC • Connected Load: 20 kVA • Rated Power: 23 kVA • Full Load Current: 67 A • Spindle Motor Current Rating: 74 A • Interrupting Capacity: 5 kA • Frequency: 50 Hz • Voltage: AC 200 V • Phase: 3 Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NL251GL3750, CNC turning and milling center DMG MORI NL2500SY/700 Ljdpozcn Hvjfx Ammshh Serial number: NL251GL3750 Available from location: Machine type: CNC turning and milling center Manufacturer: MORI SEIKI Type: NL 2500 Y / 1250 Year of manufacture: 2006 Control system: MSX 850 III MAPPS Country of origin: Japan Delivery time: upon agreement Incoterm: EXW (Ex Works) Additional information: CNC turning and milling center MORI SEIKI - NL 2500 Y / 1250 Technical details Turning diameter: 275 mm Turning length: 1,298 mm Control system: MSX 850 III MAPPS Swinging diameter over bed: 923.8 mm Swinging diameter over cross slide: 755 mm Max. turning diameter: 356 mm Max. bar diameter: 80 mm Main spindle: Speed range - main spindle: 4,000 rpm Drive power - main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm C-axis: Travel: X-axis: 260 mm Z-axis: 1,345 mm Y-axis: Turret: Tool positions: 12 Height for square tools: 25 mm Shank diameter for drill rods: max. 50 mm Turret indexing time: 0.25 sec. Speed range of driven tools: 6,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Feed rate: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse Y-axis: 10 m/min Tailstock: Tailstock travel: 1,284 mm Tailstock spindle diameter: 110 mm Taper: MT 5 Rapid traverse: 7 m/min Total power requirement: 38 kVA Machine weight approx.: 7.5 t Space requirement approx.: 5.5 x 3.4 x 2.3 m Accessories: Documentation: Chip conveyor: Hydraulic unit: Coolant system: High-pressure coolant: 3-jaw chuck: Errors and omissions in technical data are reserved. The scope of the accessories is exclusive and limited to the description of the items in the text. No claim is made for any further accessories depicted in the images, for example for illustrative purposes.