Used Mpe Tt600 for sale (1,425)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug Iodpfsy Hkd Hsx Adkjtg - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! Itedpfx Adewbknbokeg ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 700 kg, input frequency: 50 Hz, electrical fuse: 16 A, Lifting Kneader Kemper F 125 A Lifting kneader with removable bowl Dough mixer with flour dust cover Itedpfey H Utfsx Adkeg With safety circuit DGUV V3 tested Connection: 400V, 16A CEE plug Used machine We have many more lifting kneaders in stock!

Condition: excellent (used), For sale: Professional TEMPEST DD21 positive pressure blower, commonly used by fire departments, industrial facilities, paint shops, warehouses, for emergency ventilation, and anywhere extremely high air flow capacity and reliability are required. The unit is fully operational, powerful, and ready for work. The motor and control panel are EX (explosion-proof / ATEX) rated—this is a premium device rarely available on the secondary market. Iodpfxoxyugps Adketg ————— Technical data: • Brand / Model: TEMPEST Power Blower – DD21 • Manufactured in: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW  – EX class: EEx e II T3  – Speed: 2850 rpm • Certification:  – AMCA CERTIFIED (certified air performance)  – ATEX / EX (explosion-proof) • Robust steel frame with transport rollers • Large metal impeller with very high efficiency ————— General condition: The unit is well-maintained, fully functional, and from a professional facility. Typical signs of use, but technically and structurally in very good condition. ————— Applications: • Fire departments – positive pressure ventilation • Warehouses, industrial halls, paint shops • Extraction of smoke, dust, fumes • Machine and process cooling • Air purging during service work

Condition: good (used), Pumpex water pump 300m3/h, 7.5kw Iedpovgnvbjfx Adkjtg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: L23001388, overall weight: 208 kg, tank capacity: 14 l, type of cooling: water, input voltage: 380 V, Semi-industrial machine designed for mixing dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to producing short pasta, long pasta, and dough strips. Suitable for medium-scale pasta production as well as feeding dough strips to cutters or nest-shaping machines. All parts in contact with dough, as well as the entire structure, are made of stainless steel. The mixers and screw are easily removable for cleaning. Equipped with an automatic cutter with a full set of knives. Additionally, I am offering a new set for penne pasta production for sale (2200 euro). Itjdpfx Adew Av Snekog

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, total length: 640 mm, total width: 735 mm, total height: 1,110 mm, tank capacity: 60 l, input frequency: 50 Hz, empty load weight: 130 kg, overall weight: 130 kg, type of input current: three-phase, power: 6.5 kW (8.84 HP), Universal Kemper Mixer Model: Orion 60 Mixer with stainless steel bowl Bowl capacity approx. 60 liters Itjdpfxet Em Ays Adksg With 180° tilting function Performance approx. 10 to 180 liters/hour DGUV V3 tested – only available with us Connection: 400V, 16A CEE plug Used machine Many more mixers in stock!

Condition: used, input voltage: 400 V, input frequency: 50 Hz, cooling capacity: 5.5 kW (7.48 HP), immersion depth: 460 mm, Spandau Pump SKF Lubrication Systems Germany GmbH Itedpfx Adjw Rvhdskjg Submersible centrifugal pump, submersible pump, coolant submersible pump, centrifugal pump unit, immersion pump TYPE PSL0303GBS460N05BA Immersion depth: 460 mm, 400 V, 50 Hz Delta connection 5.5 kW IE2 The coolant pump is used. Price / details on request All technical data subject to errors/typing mistakes. We sell exclusively to countries of the European Union.

Condition: excellent (used), Year of construction: 2021, volume capacity 3000 m3/h feed volume 99.9 % length 3.000 Absaugschlauch mm compressed air 5.0 - 6.0 bar motor 230 Volt motor 1.5 KW weight 135 kg range L-W-H 655 x 655 x 1460 mm very rarely used according to the previous owner current new price approx. 4.500 euros Itedpfxsy Erxco Adkog special price on request Description : - KEMPER Filter-Master XL with 1x suction arm - IFA-tested - W3 approval = suitable for use with . welding of high-alloy metals - Cleaning takes place via compressed air - easy to move Technical data - Fan capacity: 3,000 m³/h - Extraction capacity (max.): 1,000 m³/h - Motor power: 1.5 kW - Supply voltage: 3 x 400 V / 50 Hz - Separation efficiency: > 99.9 % - Number of filter cartridges: 1 - Compressed air supply: 5 - 6 bar - Noise level: 69 dB (A) - Weight (without extraction arm): 135 kg - Dimensions (W x D x H): 655 x 655 x 1,460 mm Note : - Device is only used for extracting dry dust / smoke - Read the operating instructions before using the appliance for the first time. Read instructions

Condition: reconditioned (used), warranty duration: 6 months, Kemper SP100L Mixer - used - 160 kg dough capacity - stainless steel bowl and mixer - 2 gears - bowl guard - 2 working time clocks - after renovation - 6-month warranty Itodpfxewcdi Io Adkjg - collection from the warehouse / shipping option - price on request

Condition: good (used), Kemper SPA 150 Spiral Mixer - used - 240 kg dough capacity - 3 stainless steel bowls - collection from warehouse Iodpjyucdaefx Adkjtg - price on request

Condition: excellent (used), Kemper SPK 75 Spiral Mixer Itjdpfx Aeymdbdsdkog - used - capacity: 120 kg dough (approx. 180 liters) - 2 speeds - 2 timers - bowl guard - left and right bowl rotation - refurbished - warranty - collection from warehouse/shipping option - price on request

Condition: reconditioned (used), Kemper paddle mixer - model F 125 ASL - used - capacity: 200 kg dough - 1 removable bowl - refurbished Itodpfx Adoyux Smekog - good technical condition - collection from warehouse / shipping option available - price on request

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, power: 11 kW (14.96 HP), electrical fuse: 32 A, Spiral Mixer Kemper Model: SP 75 Proven technology ... time-tested and reliable! Dough mixer with manual control 2 speeds, 2 timers Robust engineering Stainless steel bowl and spiral Dimensions: 800 x 1150 x 1280/1700 mm (W x D x H) Connection: 400V, 32A CEE plug Used machine, cleaned With warranty + spare parts service Options: Delivery service Maintenance contract Itjdpfsv D Tkfsx Adkeg Service package Spare parts box Instruction & commissioning Leasing & rental service Visit our large spiral mixer exhibition!

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction Itsdpfjx Hvqfsx Adkog -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: refurbished (used), Used SPA 125 WP Kemper spiral mixer with 3 bowls Purpose: kneading dough for baking. The mixer body, bowls and protective cover are made of stainless steel. The control panel has two clocks. TECHNICAL DATA: • Bowl capacity: 300 l, • Maximum dough volume: 200 kg, Itodjvuah Espfx Adkeg • Number of speeds: 2, • Number of motors: 2 (bowl/spiral), • Number of timers: 2 pcs, • Power supply: 380V/50Hz, • Power: 9.6 – 15.1 kW, • Dimensions: 850x1400x1480mm (L x W x H), • Weight: 680 kg.

Condition: excellent (used), warranty duration: 6 months, Used WP Kemper SBR 2500 belt rounding machine For doughs with high rye content and high stickiness. Technical data: Itjdpfx Adeuwqufekjg Capacity up to 2000 pcs/hour. Weight range: 500-2000g. Electrical connection: 400V; 1.3 kW. Dimensions: 2700 x 660 x 1500 mm.

Condition: excellent (used), KEMPER SP 150 A bowl for 150 kg flour with gear drive Iodpfoghwiysx Adketg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2022, total length: 1,150 mm, total width: 800 mm, total height: 1,370 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Kemper SPL 75 Spiral Mixer Proven kneading machine for your doughs! 2 timers Spiral mixer with 2 speeds Stainless steel bowl and spiral Connection: 400 V Robust mechanics! Used machine Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Maintenance contract Spare parts box for increased safety! Delivery service Training & commissioning Iedpsyhzmwsfx Adkjtg Visit our large showroom!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 540 kg, total width: 1,000 mm, total length: 1,195 mm, input frequency: 50 Hz, electrical fuse: 16 A, Spiral Kneader Kemper F 100 S Dough machine Kemper Model: F 100 S 2 speeds Simple, robust engineering Only from us: DGUV V3 safety inspection Connection: 400V, 16A-CEE plug Used machine, cleaned Options: Maintenance contract Spare parts kit Service package Delivery service Isdpfxsyhznbo Adkjtg Training & commissioning Visit our large exhibition!

Condition: excellent (used), Weiss Umwelttechnik WT-600/70/5 Isdjy At Sxjpfx Adketg Temperature Test Chamber -70°C to +180°C Water-cooled Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This is a temperature-only test chamber without humidity control. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is widely used in industry, development, and quality assurance processes. The temperature range spans from -70°C to +180°C. The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber. Cable ports of 125 mm and 50 mm are included. Technical data: Model: WT-600/70/5 Cooling / heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Electrical connection: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16 kW Nominal current: 19 A Main fuse required: 29 A slow-blow Permissible test load: Total rack capacity: 80 kg Chamber floor: 80 kg, Shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg For your safety as a buyer, please note the following: The following procedures are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), strip width: max. 1.560 strip thickness: 1 - 7 mm blade shaft Ø: 280 mm speed: max. 120 m/min Iedpeu H U Eyjfx Adkstg Overhauling: 2017

Condition: excellent (used), strip width: max. 1.560 strip thickness: 1 - 7 mm blade shaft Ø: 280 mm Itsdpfx Aeu H U Hdjdkog speed: max. 120 m/min Overhauling: 2017

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SR1477, overall weight: 385 kg, volume flow: 650 m³/h, operating pressure: 40 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 42 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,750 rpm, warranty duration: 3 months, protection type (IP code): IP54, The TRHC 80-600 has a capacity of 650 m3/h. The 180L-4 electric motor is a suitable drive for the pump. The pump was overhauled in 2025. Free shaft end, without motor and coupling. Parts replaced during refurbishment: new shaft seal, new bearings. Wear plates and impeller re-machined. Pump housing and machine components fully surface-treated and coated. Itedpfx Adey Hf Imjkeg

Condition: used, CATALOG NUMBER 7650 Technical data: - max working length: 1500 mm Isdpfx Adoyyyt Rjkotg - max working diameter: 250 mm - milling (disc cutter): 7.5 kW - spindle – 2800 rpm 3 kW - spindle speeds: 700/1200/1500/2000 rpm - grinding unit: 0.75 kW - hydraulic motor: 3 kW - total power: 17.75 kW - air supply requirement: 6-8 bar - feeder for beams up to 150x150 mm - extraction port diameter: 100 mm, 160 mm - transport dimensions (L/W/H): 4350x2300x1980 mm - weight: approx. 3000 kg ADVANTAGES – German-made – automatic hydraulic duplicator – original DTR documentation – not repainted – used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)