Used Newmec Srl Secur20 for sale (2,659)

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW Nwedpfx Asyg Egheg Djf L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Year of construction: 2016, condition: good (used), Coating head with unwinder. Application: coating with water-based acrylic adhesives. Nwsdpfxjyf Ebis Ag Djf

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. Nwedpsxmhflefx Ag Djf This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Model - 8-1 (8 x filling heads). Serial number - 013368. Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H. Nodpfx Ageulpu Sj Dswf

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Nsdsx R Arkspfx Ag Djwf Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: used, Year of construction: 1995, Manufacturer: Ozaf srl Model: E 10 Nodpsx R Ap Aofx Ag Dewf Year : 1995 Type : Elevating belt with cleats / Giraffe conveyor.   Power : 1,5 Kw Equipment: vibration system Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm Nodjiidr Repfx Ag Dewf -Weight: 2.0 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Nwedpfxjiidrxs Ag Dsf -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm -Weight: 0.9 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg Nwedpfx Agjiidr Hs Dsf

Year of construction: 1994, condition: good (used), Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi LEA SRL. Control module from Bierrebi TA 103 automatic cutting machine. -Board: LEA SRL. Type LEA 1032 2.028.01.065.01 -Dimensions: 370/90/H28 mm -Weight: 0.4 kg Nsdpfx Asiidrbsg Dewf

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Nwjdpfeiidrqsx Ag Djf -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02 -Dimensions: 400/100/H50 mm -Weight: 0.4 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 360/130/H60 mm -Weight: 1,3 kg Nodpfxsiidruo Ag Dswf

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Nwsdpsiidr Aefx Ag Dof -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1016 2.028.01.061.02 -Dimensions: 360/130/H60 mm -Weight: 0.4 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm Nwjdpfx Asiidrmsg Dof -Weight: 3 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 -Dimensions: 265/125/H100 mm Nedpfx Asiidr Ujg Dewf -Weight: 2.0 kg

Condition: used, Year of construction: 2005, functionality: fully functional, Available for sale fully functional machines are sold separately, ideal for bottling companies seeking high performance, reliability, and quality. Top-quality European machines from leading manufacturers. Reputable Brands – Manufactured by industry-leading companies. Well-Maintained – Regular maintenance. Njdpfxjw R Tgde Ag Dewf

Condition: used, Year of construction: 2021, YEAR OF MANUFACTURE 2021 MAIN ENGINE 60 HP (45 kW) CUTTING HEIGHT 120 mm CUTTING WIDTH 400 mm Nsdpsyaplbefx Ag Dewf

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: -digital creation kit Nodjv Rbkmopfx Ag Djwf -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit -extension feeder 100 cm

Condition: new, Year of construction: 2025, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Nedpfx Agjx Urucs Djwf Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: repair required (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 103-20 ` 104-20, total height: 1,900 mm, total width: 3,400 mm, total length: 4,100 mm, type of input current: three-phase, Equipment: documentation/manual, We are offering for sale two identical apple slicing machines with a shared feed tank and feed line. These machines are suitable for processing various types of fruit, including apples, pears, peaches, nectarines, persimmons, oranges with peel, kiwis, and pineapples. They can be used for cutting into ring slices, segments, and chunks, with or without coring, and are also suitable for producing whole cored fruits such as apples, pears, peaches, nectarines, and more. The machines are therefore perfectly suited for preparing fruit for the drying industry, confectionery and baking industry, fresh fruit salads, the snack industry, or fruit preserves. The design is simple and highly versatile, enabling rapid changeover between ring-slicing, segmenting, chunking (with or without coring, depending on the particular fruit), or coring only, according to your production requirements. The machines also allow quick adjustment of slice thickness, segment number, chunk size, and coring diameter. Constructed entirely of AISI 304 stainless steel, the machines can be integrated inline with other processing equipment. Round fruits can be automatically fed, singulated in the loading area, and transferred onto a stainless steel conveyor equipped with an automatic orienting system, which aligns each fruit inside dedicated tray recesses (the automatic orienting system is suitable for apples, peaches, nectarines, and persimmons without leaves). Other fruit types are manually placed onto the stainless steel conveyor. In the slicing section, the machinery delivers a sharp and precise cut that does not affect organoleptic qualities, ensuring maximum hygiene and product quality. Fruits are processed into rings, segments, or chunks, and/or cored, using interchangeable cutting units that allow variation in slicing dimensions and coring diameter. The sliced products are transferred onto a discharge belt conveyor. Fruit cores are separated below the working area, where a conveying belt (not included in the standard supply) can be installed to carry cores to a collection container. All safety guards feature easily removable, quick-release interlocked hinges, allowing safe, rapid maintenance and thorough cleaning. Nedjx Sx Azopfx Ag Dewf

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates Nwedpewv Eazjfx Ag Dsf • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Nwjdpfx Asr Hqgxjg Def

Condition: like new (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 100925, total width: 900 mm, total length: 1,600 mm, total height: 1,900 mm, maximum load weight: 200 kg, heating capacity: 12 kW (16.32 HP), tank capacity: 600 l, warranty duration: 12 months, type of input current: three-phase, inner dimension height: 500 mm, inner dimension length: 1,200 mm, inner dimension width: 600 mm, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, power: 12 kW (16.32 HP), operating pressure: 6 bar, Equipment: CE marking, documentation/manual, Ultrasonic cleaning machine with a pneumatic platform Pieces to be cleaned besides ultrasonic action are continuously moved up/down so that to increase the result All controls for safety working are automatized by PLC Nwodpfjxxvk Tjx Ag Djf Maximal insulation and insonorization against ultrasonic noise Usefull platform dimensions: mm. 1.200 x 600, maximal piece height: mm. 500 Full stainless steel AISI 304

Condition: new, Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 281225, total width: 900 mm, total length: 4,500 mm, total height: 2,500 mm, heating capacity: 12 kW (16.32 HP), warranty duration: 12 months, type of input current: three-phase, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, compressed air connection: 6 bar, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, Equipment: CE marking, Robotic multi-stage ultrasonic washing machine Useful internal tank dimensions: mm 600 x 500 x 350h Usable tank capacity: 100 liters Supplied baskets: mm 550x400x280h Ultrasonic power: 3000 watts Ultrasonic frequency: 33 kHz PZT elements: 32 Heating: 16 kW (4+4+4+4) Voltage: 380V, three-phase, 50 Hz Power consumption: 14A Load per basket: 8 kg PLC for detergent liquid level, temperature and ultrasonic power control Full noise insulation Insulation with volcanic rock wool Entire construction in AISI 304 stainless steel Tank sheet thickness: 2 mm (20/10) Nwodexv U Ifspfx Ag Djf WORK CYCLE - Loading of baskets onto motorized platform - Pre-wash with hot detergent - Washing with ULTRASOUND - Rinsing with hot running water - Washing with ULTRASOUND - Rinsing with hot running water - Protection in special cold or hot liquid - Drying with heated and ventilated air - Unloading of basket onto motorized platform

Year of construction: 2010, condition: used, Imperia D (85 x 105 cm), year of manufacture 2010, CE 2010 Machine reinforced at connecting rods Micrometric pressure adjustment Weight: 6,000 kg Mechanical speed: 1,200 sheets/hour Machine inspected by manufacturer, safety devices optimized With hardened cutting plate Self-centering universal frame Operator arm with control panel Nwsdpfexa Epnsx Ag Dsf Refurbished pneumatic brake-clutch system Delivery time: 60 days Price: on request Warranty: 3 months