Used Novenco Cna-400 Rex Azg-S for sale (78,419)

Condition: good (used), Metal band saw, band saw machine, vertical band saw Dkjdpfofiqrcjx Akhor -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Dksdpfoi Ri Daox Akhjr 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: used, mileage: 228,400 km, power: 130 kW (176.75 HP), first registration: 11/2006, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, emission class: euro4, Equipment: air conditioning, all wheel drive, * Mercedes Unimog U400 4x4 * 3-way tipper * All-wheel drive * Dual-range gearbox * Dual PTO (high and low) * Rear hydraulic system Dsdpfx Ajqcriujkhekr * Snow plow preparation * Front PTO * Semi-automatic transmission * VIN: WDB4051031V211726 * Engine type: 900916 * kW: 130 * Euro 4 * Displacement: 4249 cc * Unladen weight: 6540 kg * Gross weight: 12500 kg * Fifth wheel load: 1000 kg * Towing capacity: 18700 kg * Wheelbase: 3080 mm * Tipper length: 2.40 m * Tipper width: 2.15 m * Vehicle length: 5150 mm * Vehicle width: 2330 mm * Vehicle height: 3070 mm * Tires: 385 / 65 R 22.5 * Net price * All information without guarantee Tel./WhatsApp:

Condition: good (used), Year of construction: 2017, CALIBRATION – PLANER MACHINE, MANUFACTURER – LEDINEK COMPANY, Model ROTOLES 400 D – S, Dsdezd E R Hspfx Akhjkr Year of Manufacture – 2017. Condition of the machine – good.

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Dkjdpfx Aod Rlk Hjkhjr Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) Dedpfx Akjy Nkwlohokr • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Dedpfxswirp As Akhjkr photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm Dksdpewirp Nefx Akher 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Dkodpfxev Hzq Ss Akher Technical data: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Condition: new, incl. ramp recess with ramps / closed loading platform with numerous lashing points / manual cable winch Technical Data: • Brand: Martz • Model: GT PLATEAU 400 Dkjdpfex S Rm Eex Akhor • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Unregistered • TÜV/HU (inspection): 2 years from first registration • Interior dimensions (LxWxH): 405 x 199 x 0 cm • Exterior dimensions (LxWxH): 555 x 203 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 565 kg • Payload: 2,135 kg • Chassis: Flatbed trailer (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber suspension axles • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Anti-slip, waterproof phenolic plywood floor • incl. manual cable winch with brake • Ramp storage compartment under the loading platform • 2x steel loading ramps • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • 8x lashing rings recessed in the side frame (600daN/kg) • Side panels can be retrofitted at any time • Automatic reverse mechanism • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin connector • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Tail lights recessed in the rear frame • Automatic jockey wheel mounted Retrofittable accessories – feel free to enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Toolbox • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance, or export license plates (Germany) can be provided - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available on site! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: new, incl. tiltable – perforated tracks + phenolic plywood & checker plate in the centre / hand winch Technical Specifications: • Brand: Martz • Model: GT KIPPBAR 400 • Vehicle type: Car transporter • Vehicle condition: New • First registration: Unregistered • MOT/General inspection: 2 years from first registration • Internal dimensions (LxWxH): 405 x 210 x 0 cm • External dimensions (LxWxH): 556 x 215 x 77 cm • Perm. gross weight: 2,700 kg • Unladen weight: 667 kg • Payload: 2,033 kg • Chassis: Platform trailer (wheels underneath) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Perforated steel tracks, ideal for secure lashing • Between tracks: phenolic plywood deck with central aluminium checker plate, anti-slip and water-resistant • incl. steel loading ramps • tiltable loading platform • very low chassis for minimal loading angle • tiltable loading platform (8° approach angle) • very lightweight trailer with robust construction • additional 8 lashing rings in the side floor • braked KNOTT rubber torsion axles • automatic reverse feature • KNOTT overrun device and parking brake • very robust, bolted and reinforced V-drawbar • 13-pin plug • reversing light • high-quality safety lighting • integrated rear fog light • recessed lighting in rear frame • rear positioning lights mounted • jockey wheel mounted Optional accessories – feel free to inquire: • 100 km/h approval with shock absorbers • anti-theft device • spare wheel • storage box • reversing light • lashing straps • and more. New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration papers can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialised dealers & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years Djdpfx Akox Tbi Tshekr - Subject to errors, omissions, and prior sale -

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V Dodpfx Ajxak H Sskhjkr total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 Dkodpfx Akexaa Aijhjr engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Condition: used, Year of construction: 1984, ja positioning automatic ja documentation ja Dkodjx U A Sfepfx Akhjr ja

Condition: good (used), Year of construction: 2013, mast type: telescopic, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.200 kg Functional Lifting capacity: 230 kg Working height: 1.420 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1220 m Transport dimensions (LxWxH): 7,85x2,32x2,38 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 400S Year of build: 2013 Condition: Used Data: Max. working height: 14,20 m Platform height: 12,20 m Max. reach: 11,00 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,83 x 0,91 m Dkjdpfx Ajwc Sp Ajkhjr Swivel range: endless Max. climbing capacity: 45% Total dimensions LxWxH: 7,85x 2,32 x 2,38 m Movable up to working height: 14,20 m Wheel pressure max.: 33kN Ground clearance: 0,25 m Drive type: Diesel Own weight: 6.200 kg Special features: Rotating work basket, four-wheel pendulum axle

Condition: used, Year of construction: 2006, mast type: telescopic, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.083 kg Functional Lifting capacity: 230 kg Working height: 1.420 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Dkodpfxowc Sppj Akhsr Delivery terms: EXW Max. horizontal reach: 1220 m Transport dimensions (LxWxH): 7,85x2,32x2,38 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 400S Year of build: 2006 Condition: Used Data: Max. working height: 14,20 m Platform height: 12,20 m Max. reach: 11,00 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,91 m Swivel range: endless Max. climbing capacity: 45 % Total dimensions LxWxH: 7,85 x 2,32 x 2,38 m Movable up to working height: 14,20 m Wheel pressure max.: 33 kN Ground clearance: 0,25 m Drive type: Diesel Own weight: 6.083 kg Special features: Rotating work basket, all-wheel drive, pendulum axle, permanently installed generator with 230 V socket in the basket.

Condition: like new (used), Pump name: KRTK 100-400/654UG1-S Year: 2016 Q (capacity): 76.39 m³/h Dkjdpfsu Up Rwox Akhjr H (head): 51 m Motor power: 62 kW Speed: 1475 rpm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Min. mold height: 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h Dkedpfxjw Suy Io Akhjr EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Conveyor belt "16"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Dkjdpjw Su A Nefx Akhor Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Dsdpjyab I Uofx Akhokr

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Dedpfx Akjyab Nfshokr

Condition: ready for operation (used), HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment. Dsdpfext Rk Rjx Akhskr

Condition: new, functionality: fully functional, grinding wheel diameter: 400 mm, Equipment: documentation/manual, Impeller mounted on ball bearings ensures quiet, smooth operation and long service life. Powerful drive motor with high torque. Adjustable guards made of durable plastic provide effective spark protection. Standard equipment includes 35 mm suction nozzles, with provision for dust extraction connection. Robust, modern design and a very wide range of additional accessories. Adjustable workpiece support rests. Modern LED lighting. Large spark protection covers. Bases shown in the photos are optional equipment available at extra cost. Technical Specifications Disc/wheel diameter: 400 mm Disc/wheel thickness: 50 mm Dkjdpjyt Hvwjfx Akhjr Disc/wheel bore: 127 mm Disc/wheel grit: G 36 / G 80 Maximum rotational speed: 1450 rpm Motor power: 7.5 kW Motor power S1 100%: 5.5 kW Voltage: 400 V Dimensions - width: 745 mm Dimensions - depth: 540 mm Dimensions - height: 510 mm Weight approx.: 114 kg

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, Dkjdpfx Aksgynw Dehsr 2; 2S; 3; 3S; 6 and UC200/400

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps Dksdpferamvasx Akhor • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement