Used Omc En 105 Logic Control 30/13 for sale (72,340)

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available- Itsdpedx R Tfsfx Anwoh

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Iodpfxju Icnfs Anwsth Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Iedpot D R R Sjfx Anwjth For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate Itedov Nhx Uopfx Anwjh

Condition: like new (used), functionality: fully functional, Nordson Spectra 30 four-channel pattern control: Advanced pattern control technology ensures straightforward, precise, and reliable pattern programming and management. Spectra pattern controllers from Nordson reduce complexity while simultaneously improving product quality and production efficiency. Please refer to the video and PDF attachment for additional information. Itodpfx Anoxqqrijwsh If you are also looking for a glue unit with accessories compatible with this controller, we are happy to assist you with the required components.

Condition: as good as new (ex-display), Industrial Heat Exchanger, Gas Cooler, Air Conditioning Cooler, Güntner, Used Machine Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 035.1/13-30-0007072P Overall dimensions: Width: 2450 mm Depth: 600 mm Height: 760 mm Year of manufacture: 2016 Isdpoy Uda Dofx Anwjth Fan data: Fan type: VT03149U Speed: 2344 / 910 min⁻¹ Current consumption: - / 0.35 A Technical specifications: Volume: 8.9 liters Maximum permissible pressure: 32 bar / 0 bar 0 / -1 bar Permissible temperature range: -50 °C / +100 °C -5 °C / +40 °C Test pressure: 35.2 bar Fluid group: 2 / gaseous state

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. Itedpsfh Tmmefx Anwjh WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm Itsdpfjyv I Smex Anwsh upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Itodpfx Aeidmkrenwjh Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: used, CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg Itodpepz Sf Eofx Anwsh

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm Isdpfsn R Dihox Anweth - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Year of construction: 2008, condition: excellent (used), Technical data Manufacturer: METRIS/Coord3 Type: KRONOS 30-50-13 Year of manufacture: 2008 Itsdpsiy Rz Ssfx Anwoh Measuring plate width: 2225 mm Holes: 65mm Height- upper edge plate: 75cm Height plate: 50cm Height bottom - plate: 25cm The machine can be modernized with new accessories according to customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop Ijdpfx Anjux Si Hjwsth - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: Orma Macchine (OleoSystem), Italy Model: LS-ECO 30/13 Year of manufacturer: 2002 Type: Panel press Working dimensions: 3000x1300 mm Thickness of the panels: min. 12 mm/ max. 50-60 mm Electric: 308 V, 50 Hz, 3 kW, 7A Machine dimensions: L 4000 x W 2100 x H 1900 Isdpjxwwggsfx Anweth Weight 3900 kg

Condition: new, bending length: 3100sheet thickness: 13upper roll diameter: 300 Technical specifications: Iodpfed Ab S Tsx Anwsth - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.400.00 We have many references!

Condition: new, sheet thickness: 13bending length: 3100upper roll diameter: 300 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Ijdpfx Ansd Ab R Howsth Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Type: 5130 Capacity: 3100 x 130 tons Year of manufacture: 2011 Itjdszd S Apepfx Anweh Wila hydraulic upper and lower clamping system Bending aid X, R, Z1 and Z2 CNC-controlled back gauge

Condition: ready for operation (used), Siemens 1HU3078-0AC01-Z permanent magnet motor, serial number: ED087590701005, with 1HU1053 20mVmin tachometer and EBD 2M 24V-23W holding brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpfx Anjzd I Emowsth

Condition: used, functionality: fully functional, Year of construction: 2003, Fully functional Itjdpfxjzd Tmie Anwsh

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force: 130 t Bending length: 3100 mm Itedozd Snxepfx Anwsh Frame width: mm Control system: DELEM DA-69TW Stroke: 365 mm Machine weight (approx.): 12,950 kg Accessories: - 2 support arms in front of the machine - CNC control system Delem - Crowning - Die shifting - Wila tool holder - Side protective doors - Light curtain - Controlled axes: y1, y2, x, r - 2 adjustable support fingers

Condition: used, mileage: 37,100 km, power: 130 kW (176.75 HP), first registration: 10/2024, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, fuel: diesel, gearing type: mechanical, suspension: steel, number of seats: 2, total width: 2,040 mm, total height: 2,590 mm, Equipment: air conditioning, airbag, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, UG1 Driver Assistance System: Hill Start Assist, 7L6 Start/Stop System for Engine, FA01 Driver Assistance System: Brake Assist (HBA), 6I1 Driver Assistance System: Lane Assist, GPS Navigation System, 6XN Exterior Mirrors, Electrically Adjustable and Heated, KH6 Air Conditioning System Climatic (Cab), 9NF Preparation for Tachograph and Accident Data Recorder, 1LA Disc Brakes Front 16" (Diameter 303 mm), 1T9 First Aid Kit, Warning Triangle and Warning Vest, 3W6 Premium Interior Noise Reduction Measures, 6DA Sun Visors, Two Folding and Pivoting Sideways, 6X3 Grab Handle on the Partition in the Cargo/Passenger Compartment, 7Y0 Without "Side Assist (Lane Change Assistant)", 8FA Without 2nd Battery, 9Z0 Operating Voltage 12 V, AS Titan Black/Titan Black-Palladium/Pearl Grey, DJ8 Diesel Engine 2.0 L/130 kW (4V) TDI, Bi-Turbo Common Rail, EL5 Prepared for Online Services, IM2 Front Axle Load Version 2, IP4 Electrical Connection Block and Preparation for Functional Control Unit, QY0 Fuel Consumption Optimization Package without Stone Chip Protection, Equivalent to 2D0, R27 Prepared for VW Connect and VW Connect Plus, UH2 Electronic Parking Brake, V0A Tires without Specification of Tire Brand, VG1 All-Season Tires, VI4 Service Indicator 50,000 km or 2 Years (Variable), 5EV Approved as a Truck with an N1 Approval (up to and including 3.5 t permissible gross weight), K4A Panel Van, B4B4 Candy White, 9I5 Daytime Running Lights with Assist Lights and Automatic Coming Home and Leaving Home Function, U9E 2 USB-C Data/Charging Ports (Center Console) with Increased Charging Power and 2 USB-C Charging Ports (Center, Windshield), 1S1 On-Board Tools and Jack, Q68 Tires 205/75 R 16 C 113/111, Low Rolling Resistance, We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Isdszd A Ezepfx Anwsth Further information:!! Leasing/Financing and Trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our website.

Condition: ready for operation (used), Siemens 1FT6105-8AC71-3AL9-Z motor, serial number YFN315124101001 - Z = N05 (alternative shaft geometry) with optical encoder B01 2048 S/R and EBD 4B 24V - 31.0W brake. Professionally and completely overhauled and tested, 100% functional. Scope of delivery as shown in the photos. Iedpszc Twtefx Anwsth

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm Itodpfxexacfme Anwjh table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: excellent (used), mileage: 108,698 km, power: 90 kW (122.37 HP), first registration: 02/2021, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 5,310 mm, total width: 1,920 mm, total height: 1,940 mm, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,800 kg, loading space length: 2,470 mm, loading space width: 1,340 mm, loading space height: 1,180 mm, Year of construction: 2021, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, sliding door, soot filter, traction control, Technical information Number of cylinders: 4 Engine capacity: 1.997 cc Iedpewl E Hyefx Anwoth Axle configuration Tyre size: 215/65R16 Brakes: disc brakes Front axle: Max. axle load: 1500 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Max. axle load: 1800 kg; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 1.950 kg Carrying capacity: 1.150 kg GVW: 3.100 kg Functional Cooling: 0 °C to -5 °C Make of bodywork: B100MAX STAND-BY 230V Cooling engine: diesel and electric Wall thickness: 8 mm Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: 052639 Other information Cool unit make: Thermo King Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Heated door mirrors - Leather interior - Parkingsensors back - Particulate filter - Radio/Cd/Audio system - Side Door Right - Stability control - Standby 230V = Remarks = VIDEO: Very nice and neat Citroen Jumpy 2.0 Bluehdi 130PK Euro 6 Maxi L3 (Longest version) Refrigerated vehicle Thermo-King B100max 0 ' Celsius / -5 ' Celsius (Cools and freezes to -5 ' Celsius) Standby 230 V (Day and night cooling) 108000 KM Dealer maintained Vin no.: VF7VFAHKKL7052639 Internal dimensions: L. 247 cm / W. 134 cm / H. 118 cm Technically and optically in very good condition Cool unit brand: Thermo King

Condition: used, empty load weight: 8,800 kg, maximum load weight: 23,200 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2014, next inspection (TÜV): 06/2026, loading space length: 13,490 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, total length: 26,000 mm, total width: 38,000 mm, total height: 140,000 mm, suspension: other, tire size: 425 / 65 R 22,5, color: white, Year of construction: 2014, front tire size: 425 / 65 R 22,5, emission class: none, Equipment: tail-lift, Axle manufacturer SAF, disc brake ET0, fresh service specification, operating hours 3,504 diesel / 3,721 electric, electrical connection, raise and lower, Bär tail lift 2,000 kg with 2,300 mm aluminium platform, locking and roll-off protection, DataCold T 500 temperature recorder, Carrier Maxima 1300 d/e refrigeration unit, toolbox, antispray, ABS / EBS, hat profiles, aluminium floor, load securing rail, 3 x locking bars, 1 x locking bar for LDS, TÜV until 06/2026, SP until 12/2026, 3-piece cold curtain, 2nd axle forced steering, hydraulic cylinder at tail lift oil-moist, refrigeration unit service due. Ijdpfx Anoytydzeweth