Used Ott Through-Feed Press Ott 300-K-D0 (1996) for sale (65,910)

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters Hfsdpfsy A Ewtjx Aqgon • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: used, Veneer press OTT Hfsdpfxjvdayms Aqgen Type JU 60S Pressing area max. 225x120 cm Electric

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Hodpov A Hkcefx Aqgefn Weight 6000 kg Total power requirement 10 kw

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Hfjdpfxszxrh Us Aqgen Makinesi (Wire EDM)

Condition: used, Year of construction: 1993, with prejoiningused, good conditionmake Otttype Kantomat 156- FÜyear 1993glue thickness 15 mmworkpiece height min 10 mm max 60 mmworkpiece width min 60 mmworkpiece length min 60/160 mmthick edges up to 3 mmcaps from the roll up to 3 mmprejoiningcross-cutting unit K 14 / 2 x 1,1 PSflush milling HF15.1 2 x 1,5 PSChamfer 082 2 x 0,8 PS 0-45° swivelingRadius milling 2 x 0,8 PSRadius scraper controlled pneumaticBuffing oscillating pneum. with pneum. feed 2 x 0,3 HPautom. edge magazinefeed speed steplessgranulate quick heating basinsound insulation hoodlarge roller supportsuction connection D 160 mmspace requirement approx. 7400 mm x 1000 mm x 1600 mmtotal connected load 22 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Hfedpjvwfyfefx Aqgjn

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Hfsdpfx Aefhgz Ioqgon Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Condition: used, Year of construction: 1996, total length: 3,750 mm, total width: 1,800 mm, total height: 2,350 mm, Colour: Red Weight: 7.000 kg - Year: 1996 - Serial number: 57995 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 135 - Max. working width [mm]: 3000 - Column gap [mm]: 2650 Hjdpfx Aqsz R Dgljgefn - Backgauge depth [mm]: 1000 - Crowning system: None - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3750mm x 1800mm x 2350mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2018, condition: good (used), Strainer Shaking Table Holes first sieve oval 25 mm.x 7 mm.Holes second sieve 25 mm. x 4 mm. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Hfodpfx Aqoz Rfi Isgen See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 1,300 mm, Wide belt sanding machine Manufacturer: Ott Model: RSO-1300 Hfodpfx Aqsznb Szjgsn Year of manufacture: 1992 Working width: 1300 mm With roller: 15 kW And Sanding shoe: 11 kW + Brush Feed speed: 10 m and 20 m

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Hodpey Dc R Tsfx Aqgsfn Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design! Hodov Nktbspfx Aqgsfn

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Hfodpfx Aqsy H Dblsgon Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide Hsdpjdzqltefx Aqgofn - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Hfjdpfx Aqoi El Ucegon

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Hfodpfx Ajzdgnboqgon Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hsdpfxsh Agnuj Aqgofn Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Hsdpfx Aoydpxvsqgsfn Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: new, The Press block feeder is a reliable machine suitable for unloading composite pallet blocks for the production of pallet legs. The PBF can simultaneously unload from two pallets of composite pallet blocks to one or two conveyors. Like the other gantry robots, the PBF is user-friendly and has the same type of interface as the rest of Mychrome’s equipment. The grip sheet is automatically removed and placed in a waste container. Machine specification: Standard performance Operators: 0 Length: 5 m Width: 2,5 m Height: 3 m Power: 10 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Hsdpfxjwduuwe Aqgefn Should be filled and controlled: Container for lubricating oil Machine capacity: 36 blocks per minute (one type of blocks) Standard equipment: - 1 gantry robot with operator panel - 1 vacuum gripper

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 Hedjxuhw Dspfx Aqgjfn 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), Year of construction: 2001, Boiler Vitoplex 300 130Kw Used Year: 2001 Type: TX3 Output: 130Kw Hfjdpfx Aqetu Txhegsn Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: ready for operation (used), Year of construction: 2000, Saw blade diameter: 800 mm Cutting height (max.): 300 mm Cutting width (max.): 550 mm Overall length: 2,000 mm Overall weight: 1,000 kg Hfjdpfx Aszd Ubujqgon Overall width: 2,300 mm Overall height: 2,000 mm Working height: 940 mm Input voltage: 400 V Saw drive: 11 kW Saw blade arbor: 40 mm Operating pressure: 8 bar 8 roller conveyors, each 2 m long; roller width: 500 mm

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Hsdjzuzxnopfx Aqgofn

Condition: good (used), Year of construction: 2024, Welding rotary table KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220V, 50 Hz Hfedpsbvk I Esfx Aqgsn Table diameter: 450 mm Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot-operated remote control Additional cost: Quick-release chuck Diameter: 300 mm, €450

Year of construction: 2018, condition: good (used), ASYS TDM 06 * Year of manufacture: 2018 * Dimensions (L × W × H): 1,590 × 1,000 × 950 mm * Transport height: 850 mm * Overall height including signal light: 2,050 mm * Weight: 235 kg * Passageway width: 790 mm * PCB size: 70–460 × 50–460 mm * PCB thickness: 0.8–4.5 mm * PCB weight: 0–3 kg * Maximum component height: ±40 mm * Power connection: 230 V / 50 Hz * Pneumatics: 6 bar supply pressure, 5 bar working pressure, oil-free compressed air * Sound pressure level: < 75 dB(A) * Complete documentation available Hsdjzqbkvspfx Aqgofn

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Hsdpfxozdq Tts Aqgsfn