Used Parker Hannifin Gmbh Vertical Light Stack Module for sale (81,608)

Condition: used, Year of construction: 2016, Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement. Credpfxsz Irl Nj Adrsh

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Crjdpfx Aexzuiasdrsh

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Stehendbogenauslage / Vertical Press-Stacker Delivery MBO SBAP 46-ME Baujahr / Year 1994 - Serial-No. 940114747 Arbeitsbreite mit ME max. 430mm / Working width with ME max. 430mm Bogenlänge / Sheet length min. 80mm Bogenlänge / Sheet length max. 300mm Stapellänge / Pile length max. 730mm Einlaufhöhe / Infeed height min. 380mm Einlaufhöhe / Infeed height max. 950mm Pressdruck / Pressure 20.000 N Mechanische Geschwindigkeit / Mechanical Speed max: 30 – 160 m/min Eigensteuerung // SelfControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Csdpfx Ajik Snwedrjrh On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 980117384, Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video Cjdpfx Adeh Axqferjrh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - also 90 KN or 120 KN possible! BROACHING MACHINES MADE IN GERMANY. Promotion: Currently comes with a free tool set (broaching pins and corresponding holders). Note: The machine can also be offered and manufactured in a version with a pulling force of 90 KN (9 tons) or 120 KN (12 tons). ==> Information for manufacturing companies or dealers with their own manufacturing: If desired, the drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a version with 9 tons of pulling force) for the broaching machine can be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us according to customer specifications after ordering. Short-term manufacturing & delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for short-term delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special pins for internal gearings, etc.) and accessories available. Please request separately. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly at our factory in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical parts). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: The range of applications mainly includes the production of keyway grooves from 3-28 mm (but also larger) and profiles of similar dimensions. The compact and space-saving machine can therefore be used successfully in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a pole-reversible geared brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pull point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be firmly clamped. The stroke adjustment is carried out by adjustable limit switches with stroke limitation. With short hubs/workpieces, several workpieces can be placed on top of each other. Broaching pins, mandrels and spare parts on request. Technical data: Pulling force: 60 KN at 3m/min, 40 KN at 6m/min. Broaching speed: 3m/min + 6m/min. (Optional: stepless speed adjustment (from 0 m/min to 6m/min possible with extended electronics) Return speed: 6m/min. Stroke: 1050 mm Crsdpjuqbnhjfx Adroh Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350mm Table hole: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Overall height of the machine: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Cedozw T Duspfx Adrjrh Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. The conveyor belt and feed chute are adjustable. Codpfsz Ihbgox Adrerh The machine is mobile on rollers, available immediately, and the price may be negotiable.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 052, turning length: 140 mm, turning diameter: 30 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 9,000 W, rotational speed (min.): 200 rpm, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 1,200 mm, type of input current: AC, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, Transco Drehautomaten GmbH Type (Typ): tc10 Serial Number (Nr.): 052 Year of Manufacture (Baujahr): 2023 Crjdpfsz Ih Hcox Adreh Machine Category: CNC Automatic Lathe (Second Operation / Audrema® series) Maximum Part Length: 140 mm (120 mm shank + 20 mm head) Maximum Workpiece Diameter: 30 mm Production Rate: Up to 35 parts per minute Control System: Siemens CNC ControlMain Drive Power: Up to 9 kW Part Changing / Loading Times: Collet chucking (free drop): 1 s. Collet chucking (guided drop): 1.5 s. Three-jaw chucking: 2 s. Located in Israel l.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. Csdjzqucfjpfx Adrorh With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Cjdpfx Asz Irfvedrsrh Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Credsziaqfjpfx Adroh

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Crodpszl Uzwefx Adroh Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 9,500 mm, total width: 1,000 mm, overall weight: 3,000 kg, Silo discharge screw conveyor for dried or wet sawdust. The system is in new condition and comes in its original packaging. The photo is a sample image – the system has never been installed. Discharge screw conveyor for silo internal diameter of 8.9 m. Discharge rate: 40 m³ per hour. Drive power: 15 kW. Lower section: for accommodating the screw conveyor drive, feed drive, main shaft with metering device, and bearings, discharge chute, and blockage sensor. Crsdpfxez Ix Iqe Adroh Upper section: with screw shaft, cross-roller swivel joint, and cover hood. Electrical control system is not included!

Condition: used, Used, electrically heated stainless steel tank / transport container Last application: Chemicals Article number: 10908 Volume: 1000 L Type: Standing, in a stainless steel frame Material (in contact with media): 1.4301 / AISI304 Design: With electric heating Bottom: Arched Top: Arched Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 200 mm Manhole: 400 mm Materials: Cjdpfez Ixg Hjx Adrsrh Inside: 1.4301 / AISI 304 Frame: Stainless steel Equipment: Nameplate: Yes Outlet type: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 325 kg

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. Crsdpfx Adefhbuysreh - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Cedpfxszzw Ule Adrjrh Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12674082, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Sartorius belt module/conveyor component, type BMK (16) 200x45.6 - manufactured in 2006. For sale is a used but almost new machine from the manufacturer Sartorius Aachen. The device filters out metal objects. The device is in very good condition. The machine was hardly used (estimated usage period: 3 to 6 months) because it was no longer needed in our company. Csdpez Iq Naofx Adrerh The device must be picked up on site. If required, it can be tested again on site.

Condition: excellent (used), Used, electrically heated stainless steel tank / transport container Last use: Chemicals Item number: 10907 Volume: 1000 L Type: Upright, mounted on a stainless steel frame Material (in contact with medium): 1.4301 / AISI304 Design: With electric heating Bottom: Curved Top: Curved Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 240 mm Materials: Credpfx Aoz Ixgyjdrsh Inside: 1.4301 / AISI 304 Frame: Stainless steel Features: Nameplate: Yes Outlet valve: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 433 kg

Condition: good (used), Lightbus combination input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, input-output module -Type: M-1400 -Input voltage: 24V DC Cjdpfx Aedngwhsdrjrh -Price per piece -Number: 9x available -Dimensions: 270/75/H70 mm -Weight: 1kg/pc.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 0963, Oven used for sinter paste drying and subsequent cooling of printed half-bridges Cedpfx Aexm Ri Hodrerh

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm Crsdpfjznz Ezox Adrjh • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Lightbus combination input/output module, input/output module, parallel input/output, analog output -Manufacturer: Beckhoff, analog output -Type: M-2400 Cedpfoh H Em Ssx Adrorh -Input voltage: 24V DC -Price per piece -Number: 2x available -Dimensions: 270/70/H75 mm -Weight: 1 kg/pc.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: Crjdpfx Adsz E Ddfsrjh - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Crsdpfx Adjzizkyjrjh Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, The used Coperion K-Tron K-ML-FB-130QC gravimetric dry solids feeder is a high-precision dosing system with a differential belt scale, manufactured in stainless steel. The unit combines continuous and particularly gentle product conveying via a dosing belt with precise gravimetric control, enabling uniform and controlled dosing of bulk materials Crsdpfx Aeiv Ic Eedrjh Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Condition: Used Price: On demand -Hopper capacity: Storage hopper with an approximate capacity of 75 liters -Drive power: Main drive for the dosing belt and material feed powered by a 0.25 kW electric motor. Vertical agitator with an independent 0.25 kW drive -Agitator speed: Low operating speed of 5.6 rpm for particularly gentle product handling -Weighing technology: High-precision SFT (smart force transducer) load cell technology for accurate gravimetric control and precise dosing. -Material: Hopper and product-contact components manufactured from robust stainless steel -Dosing belt: Polyester fabric belt with a polyurethane coating, designed for easy cleaning. The support structure can be completely removed for cleaning and maintenance purposes -Dimensions: Length: 800 mm x Width: 700 mm x Height: 1.200 mm -Empty weight: Approx. 100 kg