Used Perske Vs 31.09-4 for sale (58,697)

Condition: used, Year of construction: 2023, Hydraulic DA-Automatic XMS 4x plough body STU 40, 1 pair 4x coulter 430 HD, 1 / pair plant protectors, 1 pair 4x skimmer M0 RH65-85 Disc coulter DM 500 to / hydr. stone release heavy pendulum support wheel DM680 / Hsdpstvf Rwefx Ab Nefg

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch Hfedpfoumpq Nex Ab Njg - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: new, Perske KNFS 51.14-2 High-speed machining motor SN:01157270, unused, 100% functional, scope of delivery as per photos Hfjdpfx Asi D Nawob Neg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 Hfjdeywr Tkopfx Ab Nog 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder Hfjdpfxsb A I I Ao Ab Nog -Spare part for: EHEMANN grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock -Number: several engines available -Weight: 70 kg

Condition: used, Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KN 71.14/2 with bracket -Power: 3 kW 2880 rpm -Voltage: 380V / 50Hz Hedpfxopyk Nbo Ab Nsfg -Receiving shaft: Ø 30 x 70 mm -Tool: max. Ø 440 mm -Dimensions: 700/570/H480 mm -Weight: 100 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 71.14-2 D -Power: 4.4 kW 2820 rpm -Voltage: 400 V / 50 Hz -Mounting shaft: Ø 30 x 40 mm / M30 x 3,5 Hfsdow Av Naspfx Ab Nog -Number: 2x motor available -Price: per piece -Dimensions: 515/230/H150 mm -Weight: 37 kg/piece

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 184 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm Hodpfx Aob A I Izeb Nsfg -other sizes also available in stock -Weight: 70 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz Hodpsb A Tcrofx Ab Njfg -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz Hfedpfxeckp Tae Ab Nsg -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA268, Technical Data: 1 ABUS VS column-mounted slewing jib crane, rated load 2000 kg Load capacity at full outreach: 2000 kg / 2 t Height: approx. 4.05 m Outreach: approx. 4 m Underside of jib: approx. 3.72 m Hedpfxjx U Ngve Ab Njfg Hook height: approx. 3.2 m Total weight: approx. 850 kg Includes Abus chain hoist NL 2000 kg with trolley drive Slewing range 360°, connection for 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, lifting capacity 80–5000 kg, please enquire See pictures Shipping by freight company or collection by appointment only

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Hodjb A I Htjpfx Ab Nsfg -Input: 380 V 7.5 kW -Output: 133 V 200 Hz -Power: 10 kVA -for edgebanders, edgebanding machines -Weight: 180 kg

Condition: good (used), Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Hodpfsb A Im Rex Ab Nefg Price: per piece -Weight: 60 kg/piece

Condition: used, Technical details: floor-plate length: 470 mm plate width: 340 mm Hodpfxeu N Dn Ne Ab Nsfg plate height: 120 mm weight of the machine approx.: 107 kg space requirements of the machine approx.: 470x340x120 m from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm *

Condition: ready for operation (used), perske Frc 71.12-2 Motor SN 840646 10A VDE V, used, strong signs of use, 100% functional, scope of delivery as per photos Hfsdpfx Aborraqvo Nog

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter for finger joint milling machine HK200 and HK400 50 kW Hfodpfxom Sgvzo Ab Nog

Condition: excellent (used), Year of construction: 2000, overall weight: 1,000 kg, total length: 4,250 mm, Overhead Crane ABUS - VS 1t x 4250 MACH-ID 9308 Make: ABUS Hfsdpfx Abex Dkqlo Nsg Type: VS 1t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, overall weight: 500 kg, total length: 4,250 mm, Overhead Crane Hfedpfx Ajx Di Txjb Nsg ABUS - VS 0,5t x 4250 MACH-ID 9309 Make: ABUS Type: VS 0,5t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, 0360 mm 215 mm 1000 mm 180 mm Hedpsy Ruvzefx Ab Nofg 42 mm 3,75 kW

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - Hsdpfxjwrngcj Ab Nofg with steplessly variable spindle speeds and 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: used, Year of construction: 2019, total length: 5,100 mm, total width: 2,300 mm, total height: 2,400 mm, Weight: 10.470 kg With Pneumatic sheet-support - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6922191908 - Drive system: CNC - Control system brand: Cybelec - Control system type: D-Touch-7 - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Backgauge depth [mm]: 1000 - Transport dimensions: 5100mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10470kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hjdsw E H Sqspfx Ab Nefg Lukas van Rossum

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV Permanent Magnet Motor SN:MAC093-32704 + Stegmann DG 1604 2500 PULS / REV encoder SN:330003657, used, normal signs of use, 100% functional, scope of delivery as per photos Hfodji D In Tepfx Ab Nsg

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor SN:MAC093-24699, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Hfsdpfxoi D Ipbs Ab Neg

Condition: new, Precision guidance and lathe Make: GDW Model: LZ 400 VS1 comfortline Condition: new machine with infinitely variable speed control and continuous regulation of feeding highest security standard Top width: 1000 mm centre height: 200 mm spindle bore: 62 mm Speed range: 0-4000 RPM equipped as standard with: The latest display is already in the basic price generation includes "comfortline", the many New features and Einfachheiten includes: -9 "TFT color display -Technology memory for 99 tools -oriented spindle stop via Teach-In button -Input of constant speed or constant cutting speed (V = c) -Speed limit can be selected Error - and status display in plain text -Feeding and thread pitch input using image-supported masks -With thread-cutting must not change gears thus more subject to change, or even be purchased in addition to all gänigen To be able to thread! Furthermore, it is included in the standard: LED light, integrated into machine casing -Quick-change tool holder size B with chisel holder -Lead screw shut-off with key -Brake device for main drive -Chuck guard can be moved with end switch monitoring Hededymdrspfx Ab Nofg -Chip back wall protection removable -Splashguard cover moveable -Removable chip Pan -Easy bed stop (stop longitudinal) -Central lubrication -Reducer socket for main spindle

Condition: new, Precision guidance and lathe Make: GDW Model: LZ 400 VS2 comfortline Condition: new machine with infinitely variable speed control and continuous regulation of feeding highest security standard Top width: 1000 mm centre height: 200 mm spindle bore: 62 mm equipped as standard with: The latest display is already in the basic price generation includes "comfortline", the many New features and Einfachheiten includes: -9 "TFT color display -Technology memory for 99 tools -oriented spindle stop via Teach-In button -Input of constant speed or constant cutting speed (V = c) -Speed limit can be selected Error - and status display in plain text -Feeding and thread pitch input using image-supported masks -With thread-cutting must not change gears thus more subject to change, or even be purchased in addition to all gaenigen To be able to thread! Furthermore, it is included in the standard: LED light, integrated into machine casing -Quick-change tool holder size B with chisel holder -Lead screw shut-off with key -Brake device for main drive -Chuck guard can be moved with end switch monitoring -Chip back wall protection removable -Splashguard cover moveable -Removable chip Pan -Easy bed stop (stop longitudinal) -Central lubrication -Reducer socket for main spindle inner taper ME Hfedpob Ng Nxjfx Ab Nog