Used Pilorama Taiga Os-1 for sale (79,856)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Lodpsi Ri Eqsfx Ammohh with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: used, mileage: 70,000 km, power: 85 kW (115.57 HP), first registration: 12/2011, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro4, loading space length: 4,350 mm, loading space width: 2,050 mm, loading space height: 2,070 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35S12 / Size: 2 – Maxi / VAT deductible. Net price: €7,300 First registration: 12/2011 Mileage: 70,000 km 85 kW / 116 hp Please do not send emails – due to time constraints, emails can only be answered sporadically! Thank you for your understanding. Lhedpevh Szwofx Ammeh Opening hours and further information: Viewings & purchase without appointment: MO - THU: 9:00 - 16:00 FRI: 9:00 - 13:00 SAT: 9:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen Germany Contact: Christian Hirsch Please try calling multiple times, as we are often with customers. TÜV + general inspection: NEW Full service history: Yes Emission standard: EURO 4 Environmental badge: Green Previous owners: 1 Emission class: Euro 4 = Green environmental sticker - Reversing camera - LED interior lights with motion sensor - Cargo area length: 4.35 m - Cargo area width: 2.05 m - Cargo area height: 2.07 m Interior features: Cup holders Power steering Exterior features: Sliding side door Electrically adjustable and heated side mirrors Central locking with remote control Front electric windows Technology: Outside temperature display On-board computer Safety & Environment: Driver airbag Electronic immobiliser ABS ESP Traction control Particulate filter Other: Non-smoker vehicle Contact: Christian Hirsch Please try calling multiple times, as we are often in customer consultations. More offers at / Equipment data was determined via VIN check; technical errors may occur. Please note: The information provided online is a non-binding description and does not constitute a guaranteed feature. The seller is not liable for typographical or data transmission errors, changes, or mistakes. Subject to prior sale or error.

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: Ljdpfx Aen Hqmmemmohh - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: used, mileage: 116,000 km, power: 78 kW (106.05 HP), first registration: 12/2012, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro5, loading space length: 4,350 mm, loading space width: 2,050 mm, loading space height: 2,070 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35S11 / Size: 2 - Maxi / VAT can be shown separately. Net price: €4,990 Registration: 11/2012 Mileage: 116,000 km MOT/Inspection: 03/2027 ----Further equipment/optional extras see below: ---- Please no emails / no e-mails Due to time constraints, we cannot respond to them. Thank you for your understanding! ---- Opening hours and further information: Viewing and purchase possible without prior registration: MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. - 1:00 p.m. SAT: 9:00 a.m. - 12:00 p.m. Address: Tabakried 11 Lhsdpfx Amozbgg Semoh 84076 Pfeffenhausen If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in a customer meeting. Further offers at: Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. ---- Service booklet available: yes Emission class: EURO 5 Environmental badge: green Previous owners: 1 Emission class: Euro 5 = Green badge -Rear view camera -LED interior lighting with motion sensor -Load compartment length 4.35 m -Load compartment width 2.05 m -Load compartment height 2.07 m Interior features: Cup holder, Power steering Exterior features: Sliding door, Electrically adjustable & heated side mirrors, Central locking incl. remote control, Electric windows - front Technology: Outside temperature, On-board computer Safety & Environment: Driver's airbag, Electronic immobilizer, ABS, ESP, Traction control, Particulate filter Other: Non-smoking vehicle If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in a customer meeting. Further offers at: Further offers at: Equipment was determined using a VIN query. Technical errors may occur. Opening hours and further information: Viewing & purchase possible without prior registration: MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. - 1:00 p.m. SAT: 9:00 a.m. - 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen D- Germany ----Information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale excepted. If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Further offers at: Further offers at: Equipment was determined using a VIN query. Technical errors may occur. ----Further offers at: Further offers at: Equipment was determined using a VIN query. Technical errors may occur. Information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale excepted. Sale only to commercial businesses or for export.

Condition: used, mileage: 552,433 km, power: 330 kW (448.67 HP), first registration: 06/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * 1st owner Ledey Ucrlspfx Ammehh * New TÜV (German vehicle inspection) Special equipment: Emission standard EURO 5 EEV, Airbag driver side, Work light on the rear wall of the cab above, Audio system: CD radio (Bluetooth), Exterior mirror on the right with reversing position, Compressed air connection in the cab, Air horn, Driving assistance system: Attention Assist (fatigue detection sensor), Driving assistance system: Brake Assist (Active Brake Assist 2), Driving assistance system: Lane keeping assist, Windshield tinted, Info display 12.7 cm with additional display, Automatic climate control, Fuel tank: 390 L aluminum, Light and rain sensor, Air intake behind the cab, Mounting plate / saddle plate 12 mm for saddle coupling, On-board unit for toll collection, Retarder, Rotating beacon left/right, Reversing warning audible (warning signal outside), Saddle coupling, low maintenance, Seats in the cab: Armrest co-driver seat, Seats in the cab: Driver's seat suspension seat comfort, Sun visor outside, Sun protection roller side window, driver's door, 12V socket in the co-driver footwell, 24V socket in the co-driver footwell additionally, Fleetboard preparation, Oil cooler transmission Additional equipment: Emission standard EURO 5, Axle configuration: 4x2, Axle load front axle 7.5 t, Actros 4, Trailer socket 24V / 15-pole, Work lights, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: L StreamSpace, Cab: steel-sprung, Comfort, Cab floor with engine tunnel 170 mm, Suspension: leaf spring / air, Suspension: front spring bracket aluminum, Suspension: front springs 7.5 t, 1 leaf, Window lifter electric, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle bevel gear 440, Body / structure: semi-trailer tractor, Comfort bunk lower, Comfort locking system, Communication interface, Fender 3-part, Radiator grille, Steering assistance pump regulated, Air compressor 2-stage, Engine 12.8 L - 330 kW R6 Diesel (OM 471), Engine brake, Engine compartment encapsulation, Wheelbase 3700 mm, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: fabric, Seats in the cab: Co-driver function seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Storage flap outside left, Socket cab 24V, Tachograph / EC control unit, Door extension for cab, Underbody cladding aerodynamically shaped, Underrun protection front, Preparation CB radio, Preparation toll collection, Front axle cambered, Water pump regulated, Permissible total weight 18.00 t, Auxiliary heater (water)

Condition: excellent (used), Year of construction: 2007, Window fitting press Lodpet T Srpefx Ammjhh

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 70 kg, Wilo Stratos circulation pump, double pump, D80/1-12, article no.: 2150586, BL 360mm We offer the circulation pump for sale. Art. no.: 2150586 / 15w16 Voltage: 230V 50/60 Hz PN 6/10 P1: 40-1550 W Installation length: 360mm ︎ The heating pump, which we recently disassembled and was functioning perfectly until removal, is ready for use and in the condition shown in the pictures. ︎ Runs extremely quietly and smoothly. ︎ Further technical data: See photos. ︎ Scope of delivery as shown in the pictures. Description: The item offered here is in good condition. Inspection before purchase is possible and is highly recommended. All our items are disassembled, cleaned, and visually inspected for damage by qualified personnel from our company before sale. Please refer to the description and the pictures for all relevant data/information about the item. All information is provided to the best of our knowledge and belief; the offered goods are sold as described and after inspection. Shipping is possible, but the buyer pays the shipping costs. Shipping and packaging: €70 #Shelf 23-7-1 International buyers welcome Lhedpfsy Szfxsx Ammsh Please ask for shipping costs to Europe and overseas.

Condition: used, 1 Posten Wesswerkzeug siehe Bilder The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase; our terms and conditions of sale apply exclusively. Lhsdpfsyycyasx Ammsh About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.

Year of construction: 1986, condition: good (used), Rotary filler with 1 head. Cup size round: 85 mm. Stations: cup destacking, main doser (150 - 250 ml) for viscose liquid products, with hopper lid dispensing by vacuum, heat sealing, snap-on lid capper. With outfeed conveyor. Machine has plexiglas safety guards. Controls: Siemens, model: S5 . Total dimensions: 160 x 170 x 300 cm. 3Kw/230/380V 2700/hr Lhodpfelyqu Rjx Ammoh machine can be sold as-is or adjusted to customer needs. more pictures on request

Condition: refurbished (used), Year of construction: 1978, Universal milling machine Manufacturer: DECKEL Model: FP 1 with stepless feed Year of manufacture: approx. 1975 - partially overhauled, newly painted, RAL 7035 light grey / RAL 7012 basalt grey / RAL 5012 light blue with warranty geometric inspection with test report Accessories: Ljdpfx Aodf E H Aommohh - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual - used, as is -

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Ledpfxsyb Nc Ne Ammshh Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: used, mileage: 618,325 km, power: 375 kW (509.86 HP), first registration: 11/2015, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2015, Unladen weight: 11,800 kg Lhodpey H Uwkjfx Ammjh

Condition: used, This offer includes 3 cutlery and tray trolleys from the manufacturer Rieber, model PO-SV1/1. !!! We need space!!! Our special price: €995 gross The plastic cutlery containers show minor damage. Each trolley comes equipped with 37 trays (Total: 111 trays). Cutlery is also included (see photos). You will receive an invoice with VAT stated separately. Our used equipment service for you: - 6-month warranty on all electrical components, limited to replacement of defective parts (excl. labor for installation/removal) - High-quality branded equipment at fair prices - Professional refurbishment/inspection and expert cleaning - Tested and fully operational – or your money back - Flexible options for shipping or self-collection - Competent advice before and after purchase - Provision of operating manuals, wiring diagrams, and spare parts - Inspection according to DGUV V3 Technical data: Dimensions (W x D x H): 730 x 690 x 911 mm Platform dimensions (W x D): 412 x 555 mm Basket/tray dimensions (W x D): max. 530 x 400 mm Weight: 43 kg Maximum load: 200 kg Constructed from stainless steel With one platform Anti-tilt and anti-jamming guide system Spring tension adjustable depending on dish/tray weight Safety push handle 4 bumper corners Rust-free casters in accordance with DIN 18867 Part 8 2 swivel casters and 2 locking swivel casters (Ø 125 mm) Stacking height: approx. 575 mm Lhsdpfx Amsy Hh R Dsmeh Condition: used, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, need advice, or want to view the item on-site? Contact us by phone during our business hours: Monday–Friday: 09:00 – 13:00 and 14:00 – 17:00 Sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, Year of construction: 2014, Used equipment. Please ask for additional details. Lhedpfx Ajyzgpzjmmeh

Condition: used, tool adaptor . weight ca. 500 kg Spindle headsDrill rod extensionsMounts with drills Trolley 830 high x 750 wide x 600 deep Ljdpfxsyyczqj Ammehh technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team

Condition: good (used), Bramidan B 20 Baler Bale dimensions - WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of ties: 4 Year of manufacture: 2012 - 2017 Price: 4,500 EUR Bramidan X25 – Efficient Baler for Waste Compaction Ljdpfx Amev Aku Semohh Suitable for various materials, including stretchable ones Large, wide chamber Locking mechanisms prevent expansion of compacted material inside the chamber Short cycle time allows for quick waste processing TYPICAL MATERIALS: - Cardboard - Plastic film - Paper - PET bottles - Aluminum cans - Rigid plastics - Textiles - EPS Styrofoam - Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm PRESS FORCE 25 tons BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year of manufacture: 2012-2018 Price: 5,500 EUR ORWAK 3410 For paper, film, cans, PET bottles. Pressing force: 24 tons. 3-phase power 400 V, 50 Hz Bale dimensions: Width: 1200 mm Depth: 800 mm Height: 1000 mm Bale weight: up to 400 kg Year of manufacture: 2010-2013 Price: 4,000 EUR Orwak 3420 Year of manufacture: 2014 Price: 5,000 EUR Bramidan 4-OS baler: 5,200 EUR Pressing force: 50 tons Baler 4-X25: 4,500 EUR

Condition: used, mileage: 63,353 km, power: 265 kW (360.30 HP), first registration: 04/2024, fuel type: diesel, number of seats: 44, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,050 mm, total height: 3,210 mm, Year of construction: 2024, Equipment: ABS, air conditioning, disability-friendly, = Additional Options and Accessories = - Retarder - Wheelchair lift - USB connections Lhodpfxjwx N Afo Ammoh - USB connections - Webasto = Further Information = Damages: none = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking lot that serves as an exhibition area. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typing mistakes. Viewing of used buses is possible during our opening hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: MA-VIB, fan blower radial fan type OS.120.201.4 -Engine power: kW -Speed: 2950 rpm Lodpjuqf Ulefx Ammshh -Volume output: /min -Fan wheel: Ø 120 x 30 mm -Connection input: Ø 135 mm -Connection output: 80 x 55 mm -Dimensions: 210/190/H200 mm -Weight: 3.1 kg

Condition: good (used), Signal towers, signal lights, signal lamp, indicator light -Manufacturer: Patlite Lhsdpfx Amob Rnm Iemeh -Type: LU7-02 08X27P -Dimensions: 70 x 650 mm -Weight: 1.2 kg

Condition: good (used), Ball turning device, ball turning device, universal ball turning device -Manufacturer: Bilz, Universal ball turning device size 1 -Turning Ø: 0-80 mm Lhodev Sqttopfx Ammsh -Dimensions: 440/260/H230 mm -Weight: 19.7 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: B&R, ACOPOS P3 servo drive -Type: 8E14X5HWT10Dimensions: 375/70/H265 mm -Weight: 3.9 kg. Lodexn N Anspfx Ammshh

Condition: good (used), Plastic panels, plastic laminate, veneer panels, decorative panels, laminated panels -Manufacturer: Resopal, HPL plastic panels 37 pallets 6710 kg -different sizes: see photo parts list -Thickness: 1 mm / 1.4 mm -Sale: only complete -Dimensions: 3200/1330/H1800 mm / 3100/1330/H1850 mm / 2190/1330/H1600 mm -Weight: 3150 kg / 1640 kg / 1920 kg Ledpfx Aowwh H Tommehh

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry Ledpfx Aexaac Aommehh When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: good (used), Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive: 2.9 kW -Shaft: Ø 32 mm Ledpob A Ixpjfx Ammjhh -Speedometer -External cooling -Number: 2x motors available -Price: per piece -Weight: 70 kg/piece

Condition: good (used), KEN 311-OS Laboratory Dishwasher Laboratory dishwashing machine with high capacity The flexible machine for laboratories with high washing needs The KEN 311-OS covers the quality washing needs of laboratories Advantages Washing of instruments in up to 2 levels at once High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of environment and economy Minimal maintenance and service Specifications: Height 140 cm. Width 60 cm. Depth 64 cm. Electrical connection 400 Volt 3N 50 Hz Power 10,1 kW Lhodpfx Aeiuz Dbommoh Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. More items - new and used - can be found in our store! International shipping costs on request!