Used Pocket-Strobe Stroboscope, Range 30 for sale (36,594)

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, type of input current: three-phase, type of cooling: air, Reliable conveyor dryer built for curing plastisol and water-based inks on screen-printed garments and textiles. The Econored III 30 combines infrared heating elements with a 30-inch belt width, offering efficient, even heat distribution for consistent, professional-quality curing results. Key Features: 30" (76 cm) belt width, suitable for small to mid-volume production runs Infrared heating technology for fast, energy-efficient curing Adjustable belt speed and temperature controls for precise curing across different ink types and fabrics Digital temperature control panel for accurate, repeatable settings Sturdy frame construction for stable, long-term operation Compact footprint, well suited for shops with limited floor space Reduced energy consumption compared to older conventional dryer models Ideal for: Screen printing shops, apparel decorators, and textile businesses looking for a dependable mid-size tunnel dryer to boost throughput and ensure consistent ink curing. Rcedsztx T Hopfx Ab Tsf Well-maintained unit, ready for immediate use in production.

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Rcedpfx Abertrzaj Tof Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis Rcodpfsznr Sxex Ab Tjf - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Machine in good working condition. Rodpfx Abjzutixo Tjcf Capacity: 30 mm steel x 2500 mm.

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is a robust and reliable Holzkraft / SCM Minimax FS 30 Genius jointer and thicknesser. This machine is ideally suited for carpentry shops, joineries, training workshops, and ambitious woodworking enthusiasts. Thanks to its solid cast iron tables and proven SCM technology, the machine operates precisely and reliably. The machine is in good used condition and can be inspected and tested by appointment. Technical data: Redjzlqh Hopfx Ab Tscf Manufacturer: Holzkraft / SCM minimax Type: FS 30 Genius Year of manufacture: 2009 Voltage: 400 V / 3 phases Motor power: approx. 3.0 kW Jointer width: 300 mm Thicknesser width: 300 mm Combined jointer and thicknesser Cast iron tables Aluminum fence Dust extraction port available Without trailer Weight: approx. 150 kg Equipment: Jointer Thicknesser Aluminum fence Folding jointer tables Dust hood Operation via main switch with emergency stop Scope of delivery: Holzkraft / SCM Minimax FS 30 Genius Accessories as shown in the photos The machine is subject to differential tax according to § 25a UStG. Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Redpfx Abjtp I S Ao Tecf

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Rodezl Ap Nspfx Ab Tecf

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-sided planer with additional horizontal work spindle unit and outfeed unit 4-sided universal planer KUPFERMÜHLE Rcsdpfsx Ehfcsx Ab Tof Electrical system 400 Volt / 50 Hz ...../58.5 kW Paint finish still original Reseda green RAL 6011 Motor power + arrangement kW bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle bottom 11.0 / feed 7.5 / power 3.0 Feed speed min/max. 5 – 30 m/min Working spindles 5 pieces Dust extraction / suction nozzles bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min / max 30 mm / 310 mm Working height min / max 2-sided 15 mm / 300 mm Working height min / max 4-sided 15 mm / 180 mm (OPTION 250 or 300 mm) Key features Constant table height Guide rail RIGHT Planer heads for changing Jointing device at the bottom and top Table tops with slits for sound insulation and are interchangeable Outfeed unit with 2 driven rollers at the top and double-sided guided upper part Height adjustment synchronized with the base machine Machine in repaired and inspected condition with functional guarantee Further options New paint finish Repainting Complete overhaul etc. etc.

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Redpfx Aeunh Hrsb Tjcf The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 14151, overall weight: 3,485 kg, working width: 3,100 mm, sheet thickness (max.): 2 mm, We are offering this used Göteneds K25-30 A 1200 bending machine, manufactured in 1996. Model: K25-30 A 1200 Working area: 3100mm x 2.0 mm Manufacturing number: 14151 Year of manufacture: 12/96 Weight: 3485 kg The machine received a new gearbox and a new display some time ago. Rcedpfx Aezdzxgjb Tof The machine is in good used condition and has some minor inaccuracies due to its age. However, it is perfectly adequate for many applications. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2013, screw diameter: 38 mm, Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Year of manufacture: 2013 Screw diameter: 38 mm L/D ratio: 30 Rsdszuk Irspfx Ab Tscf It is supplied without a screw and is in very good condition; the machine was never used in production.

Condition: ready for operation (used), Gero F 100-200/12SO high-temperature furnace, 201101895 - operating range: 30 - 1200°C / cable length (green): 3.9m, connection cable: 3.00m, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rjdsx Erpnepfx Ab Tjcf

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: - Pressing force: 320 t - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW Rcsdpfx Abszvmqfe Tef - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-part universal die, split - V-dies - Split upper tool set, various other tools

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Redpfxszux Tps Ab Tecf Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: reconditioned (used), Year of construction: 2008, Horizon HT-30 Used trimmer for cutting three sides in a single pass Year 2008 Counter: approximately 1.7 million cuts Rsdpfozxdhyjx Ab Tscf Standard equipment Inspected, cleaned, and refurbished Option to add A6-size trimming capability – please let us know! Excellent condition Available in stock

Condition: excellent (used), Turbo Pulper / Industrial Refiner MANZINI TE30 – Stainless Steel MANZINI TE30 single-stage turbo pulper, designed for the continuous refining, screening, and separation of pulps, purees, and processed food products, separating the usable fraction from skins, seeds, fibers, and other solid residues. Manufactured by MANZINI, the TE30 uses a high-speed rotary system that drives the product against a perforated sieve or screen, allowing for the production of a refined and homogeneous fraction for subsequent processing stages. Its industrial construction in stainless steel, drive by a large electric motor, and continuous operation make it especially suitable for tomato, fruit, and vegetable processing lines. MAIN FEATURES -Manufacturer: MANZINI -Model: TE30 -Type: Single-stage turbo pulper / refiner -Continuous refining and screening process -Separation of pulp and solid residues -High-speed rotary system -Separation sieve / screen -Continuous product feed -Separate discharge of refined product and residues -Construction mainly in stainless steel -Drive by electric motor -Closed processing chamber -Robust construction for intensive industrial use -Accessibility for cleaning and maintenance -Integrable into continuous processing lines PROCESS The previously crushed or prepared product is continuously fed into the MANZINI TE30. Inside, the rotary system drives the product against the screen. The pulp, puree, or refined fraction passes through the perforations, while skins, seeds, fibers, and other larger particles are retained and conveyed to a separate discharge. The equipment can be used for the following operations: Pulping and refining Obtaining pulp or puree Separation of skins and seeds Removal of coarse fibers Screening of product Pre-concentration preparation Refining prior to heat treatment APPLICATIONS Especially suitable for tomato processing industries, fruit and vegetable processors, and manufacturers of purees, pulps, concentrates, sauces, and other food products. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of complete extraction and refining lines. The MANZINI TE30 can be integrated with crushers, mills, preheaters, pumps, evaporators, aseptic sterilizers, and other process equipment. Rcedjzxcz Espfx Ab Tjf Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 36 h, On behalf of a customer: City Ranger 3070, like new, only 36 operating hours, cab, air conditioning, Isri luxury seat with seat heating, front sweeper reduced to 122 cm, spreader, cruise control, etc. Has not been used for winter service yet. Only €82,000.00 plus VAT. Available immediately. Redsx N Ayfjpfx Ab Tscf

Condition: like new (used), Year of construction: 2023, RHTC hydraulic workshop press HF-2 in good condition. Specifications: Pressing force: 30 tons Maximum pressure: 374.6 bar Cylinder stroke: 160 mm System capacity: 1.65 liters Fixed cylinder Rcedpfx Abozivkzj Tof Working width: 565 mm Weight: 165 kg Professional quality, suitable for pressing bearings, bushings, axles, and other workshop tasks. Laser roller stand also for sale. Price: €1,250 excluding VAT.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 558.123E / 1113. 2459 E, type of input current: three-phase, total length: 4,500 mm, total height: 960 mm, total width: 2,010 mm, overall weight: 3,300 kg, warranty duration: 6 months, input current: 400 A, year of last overhaul: 2026, product height (max.): 170 mm, product height (min.): 30 mm, product length (max.): 400 mm, product length (min.): 100 mm, S30 GBK 220 Packaging Machine + Selectra SL 30 Hartmann Slicer By combining the functionality of the S30 GBK 220 packaging machine with the efficiency of the Selectra SL 30 slicer, we obtain an extremely efficient process line that enables the automation of production processes. Innovative mechanical systems supplied by GHD HARTMANN ensure smooth, continuous, and efficient operation, making them suitable even for factories producing bakery products on a large scale. S30 GBK 220 GHD Hartmann Packaging Machine Device performance: 30-45 cycles/min, with stepless adjustment (performance depends on the specific product). Technical data: dimensions: length: approx. 4500 mm, width: approx. 2010 mm, table height: min. 960 mm, height: min. 2080 mm, weight: 1700 kg, product dimensions: length: 100 - 400 mm, width: up to 260 mm, height: 30 - 170 mm (other dimensions upon request), capacity: 1800 - 2700 packages/hour. GHD Hartmann Selectra SL 30 Band Slicer A fully automatic slicer equipped with durable band knives with a length of 176 inches, stretched between two chrome-plated drums. Technical data: performance: up to 3800 loaves/hour (depending on the type of bread), admissible product dimensions: length: 160 – 400 mm, height: 50 – 180 mm, Rcedpfjzwup Ssx Ab Tof overall machine dimensions: 3145 x 1150 x 2600 mm, weight: approx. 1600 kg.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Redpfx Ajxpfuieb Tjcf Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Rcjdpfx Aezwhk Nob Tjf

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Redpfx Aey Sazfsb Tjcf Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Rsdjyxccrepfx Ab Tecf - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, mileage: 254,602 km, power: 306 kW (416.04 HP), first registration: 08/1987, fuel type: diesel, empty load weight: 12,560 kg, maximum load weight: 15,440 kg, tire size: 315/80 R 22.5/12mm, axle configuration: 8x4, wheelbase: 4,200 mm, next inspection (TÜV): 09/2022, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, total length: 8,700 mm, total width: 25,500 mm, total height: 30,000 mm, front tire size: 315/80 R 22.5/12mm, operation weight: 28,000 kg, Equipment: air conditioning,

Condition: good (used), Year of construction: 2006, functionality: fully functional, Max. machining diameter: 2,800 mm Rcedpfx Ajzu Itrsb Tof Min. machining diameter: 1,400 mm Max. machining height: 600 mm Max. workpiece weight: 5,000 kg Rotational speed of the chuck: 21–68 /min.