Used Pocket-Strobe Stroboscope, Range 30 for sale (36,906)

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. Knodpfx Anezvm Uksdja EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: limited functionality, machine/vehicle number: 11862780, Paolo Orizio S.p.A. single-sided circular knitting machine, model FI-HN, machine number 11862780. Made in Italy. Knedpfxszvm Nbe Andea NAMEPLATE DATA · Diameter: 30 inches · Gauge: 20 · Number of needles: 1860 · Number of feeders: 96 · Cylinder number: 1860253 · Needles: VO 15752 T02 / T03 / T04 · Sinkers: 209225000 · No CE marking 96 FEEDERS With 96 feeders in 30 inches, this machine has the highest feeder density in the lot. For the same diameter and gauge, a higher number of feeders translates into more production per revolution. APPLICATION Single-sided knitted fabric: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT · Warning panel: network connected, warnings, lighting, Rosen units, open door warning · Two-row counter with preselection · Complete upper fillet LUBRICATION Oils indicated on the nameplate: IP Mellana 150 / Shell Full IP Gear Oil 72 for parts lubricated with oil and the variator; IP Athesia Grease EP2 / Shell Alvania EP2 for greased parts; IP Feltria 46 / Shell Vexilla 6 for needles and sinkers. CONDITION Machine partially disassembled: the cam plate and sinker ring are accessible without covers. Sold as is. An on-site inspection visit can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: good (used), machine/vehicle number: 2301, Year of construction: 2000, load capacity: 12,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,660 mm, total width: 2,600 mm, operation weight: 15,300 kg, additional equipment features: Manual sliding cabin, Dual tread, Front mud guards, Rear mud guards, Warning triangle, Equipment: lighting, SveTruck 1260-30 from Uniktruck Knodpfx Aneyuhmmsdsa Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 11.00x20 Wheel size – Steering wheel: 11.00x20

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Knjdpfxjzutixo Andea Machine in good working condition. Capacity: 30 mm steel x 2500 mm.

Condition: good (used), functionality: fully functional, machine/vehicle number: 351H1015830, Year of construction: 2000, operating hours: 9,606 h, load capacity: 3,000 kg, load center: 500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Perkins, gearing type: hydrostat, tire condition: 55 %, front tire type: pneumatic tires (air-filled), front tire size: 7.00-12, rear tire type: pneumatic tires (air-filled), rear tire size: 23x9-10, overall weight: 5,260 kg, color: red, Equipment: CE marking, lighting, == KEY SPECIFICATIONS == Year: 2000 Hours: 9,606.7 h Kodpszuwtzjfx Andona Lifting capacity: 3,000 kg Mast type: Duplex Drive: Diesel Engine: Perkins Operating weight: 5,260 kg Serial number: 351H1015830 CE certification: Yes == EQUIPMENT & FEATURES == Duplex mast Closed cabin Long forks Front work lights Rear work lights Flashing beacon Exterior mirrors Front windscreen wiper Load capacity diagram == CONDITION == Used condition with visible signs of commercial use. The machine shows dirt, scratches, paint wear and surface corrosion, particularly on the mast, fork carriage and forks, as shown in the photographs. Inspection and operational testing are possible by appointment. == DESCRIPTION == Used Linde H30D-03 diesel forklift from 2000 with 9,606.7 operating hours. The machine has a rated lifting capacity of 3,000 kg, a duplex mast, a Perkins diesel engine and an operating weight of 5,260 kg. Equipped with a closed cabin, long forks, work lighting, exterior mirrors, a windscreen wiper and a flashing beacon. Suitable for industrial material handling, warehouse operations and general loading work. == PRICE, LOCATION & DELIVERY == Price: €7,950 excluding VAT Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: used, functionality: fully functional, machine/vehicle number: 108813364, Single-sided circular knitting machine by Paolo Orizio S.p.A., model JO/5, machine number 108813364. Made in Italy. PLATE DATA · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1860 · Number of feeders: 72 · Cylinder number: 04871290 · Needles: VO 15752 T02SA / T03SA / T04SA · Sinkers: L7 22601 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION Single-sided knitted fabric with 72 feeders: plain jersey, pique, fleece and derivatives for outerwear, sportswear and underwear. INSTALLED EQUIPMENT · Orizio MPF positive feeding system · Hole detector · Needle detector · Revolution counter and pre-selection · Open door warning · UNIWAVE mist lubricator · Complete upper butt · Fabric take-up with upper fan INCLUDED OPTIONS The machine panel indicates MPF-UNITS included and ROSEN-UNITS / HOLE-DETECTOR included. Knsdpfx Anjzvh Swedea LUBRICATION Oil recommended on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 186, Single jersey circular knitting machine, Jumberca model SLM 3. Made in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking Knjdpfozvh R Hsx Andsa APPLICATION: Single jersey knitting: plain jersey, piqué, and fabrics for outerwear, sportswear, and underwear. FOUR-TRACK CYLINDER: Groz-Beckert Vo-Ls 136.52 cylinder needles in all four positions G001, G002, G003, and G004. Internal set reference SK 20 5727 001/00. A four-track cylinder expands the range of structures the machine can produce compared to a two- or three-track cylinder. EQUIPMENT FITTED · Control cabinet with indicator panel · Kübler counter · Separate main motor · Complete top creel · Gear-driven fabric take-down IDENTIFICATION · Stamped frame number: 209622001 · Dealer: SECONTEX / TEX-ROY S.L., Sta. Agnès de Malanyanes (Barcelona) CONDITION: Machine complete and assembled. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No dismantling required · Location: Albacete, Spain

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 988, Jumberca SYX2 single-jersey circular knitting machine, machine number 988, year 1990. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Plate date: 04/25/1990 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single-jersey knitted fabric: plain jersey, pique, and fabrics for outerwear, sportswear, and underwear. INSTALLED EQUIPMENT: · Memminger-IRO LMW 3 yarn control unit · Electrical panel with LOYJE 13.220 transformers and ABB / BBC thermal-magnetic circuit breakers · Transformer with 200, 220, 380, 415, and 440 V taps · Stepped pulley drive · Complete top sinker plate · Emergency stop button NEEDLES: Groz-Beckert Vota 76.48 G09 cylinder needles and SNK 42.37-24 G2 sinkers. Internal set reference: SK 20 5719 001/00. POWER SUPPLY VOLTAGE: The transformer has taps for 200, 220, 380, 415, and 440 V, allowing the machine to be adapted to different power supply networks. Knodjzvh Eqepfx Andja CONDITION: Complete and assembled machine. Electrical panel accessible and photographed. A visit can be arranged for on-site inspection and operational testing. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: ready for operation (used), Trumpf 12-12-30-A32/09 disc laser S/N 1804667-00097 + power cable, used, minor signs of use, 100% functional, scope of delivery as per photos Kedpfx Aozu Hk Aendena

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Ksdpfjzu Hlyox Andjna

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain Knodpfx Aozvh D Hondea APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,620 mm, · Hersteller Manitou · Modellname MC 30-4 ST5 · Antriebsart Diesel Kedpfx Anezvztzjdona · Bedienertyp Sitzen · Max. Tragkraft 3000 kg · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 626 mm · Standard mast reference of the machine FVD 33 · Vorderachslast (beladen) / Hinterachslast (beladen) 6650 kg / 790 kg · Bereifung Pneumatisch · Reifengröße, vorn 12,5/80-18/12 SL R4 · Reifengröße, hinten 27x10-12 SKS · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Gabelträger DIN 15173 A/B 3A · Gang· breite für Palette 1000 x 1200 quer 5461 mm · Wenderadius 3435 mm · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit – beladen 46 % · Festellbremse Hydraulik bremst durch Druckverlust · Nennleistung Verbrennungsmotor 37 kW · Hersteller / Motor Modell / Motornorm Kubota / D1803 CRT E5B / Stage V · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Ölmenge für Anbaugerät 42 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 79 dB

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. Kjdpezvhx Rsfx Andsna RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: used, Year of construction: 1997, turning diameter / mm turning length / mm control / Technical Data – MAZAK QTN-30 Manufacturer: MAZAK / Yamazaki Mazak Ksdpszu Dazofx Andjna Type: QTN-30 Year of manufacture: 1997 Machine type: Horizontal CNC turning center Control system: MAZATROL T PLUS Number of axes: 2 Max. swing diameter: approx. 510 mm Max. machining diameter: approx. 310–320 mm Max. machining length: approx. 1,000 mm X-axis travel: approx. 200–201 mm Z-axis travel: approx. 1,010 mm Spindle speed: approx. 33–3,300 rpm Spindle bore: approx. 80 mm Spindle nose: A2-8 Spindle motor: approx. 22 kW Chuck: Hydraulic, approx. 250–300 mm Turret: 8-station / 16 tool positions, depending on configuration Tool holder: approx. 25 × 25 mm Tailstock: Fully automatic, MT 5 Automatic tailstock: Included Chip conveyor: Included Coolant system: Included (depending on equipment) Machine weight: approx. 4,300–5,300 kg (depending on configuration) Dimensions: approx. 2,800 × 1,950 × 1,950 mm (depending on configuration) The specifications regarding the 1997 model year and the QTN-30—featuring MAZATROL T PLUS, Ø510 × 1,000 mm capacity, Ø80 mm spindle bore, 33–3,300 rpm speed range, and a 22 kW spindle motor—are confirmed by a specific QTN-30 offer from 1997. Subject to change and without guarantee – Technical data

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: - Pressing force: 320 t Kedpfxozvmqfj Andona - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-part universal die, split - V-dies - Split upper tool set, various other tools

Condition: good (used), machine/vehicle number: 2674, Year of construction: 1999, load capacity: 12,000 kg, lifting height: 6,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,300 mm, total length: 4,820 mm, total width: 2,500 mm, operation weight: 17,500 kg, additional equipment features: Warning triangle, Centralized greasing system, Fire extinguisher , Dual tread, Equipment: lighting, SveTruck 1260-30 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 11.00-20 Knedpfx Ansyuhqxsdoa Wheel size – Steering wheel: 11.00-20

Condition: like new (used), Year of construction: 2015, operating hours: 832 h, load capacity: 3,000 kg, fuel type: electric, Manufacturer + model: LINDE P 30 ID: 21070.6069 Knodpfx Anozut Smedja Category: Demo Capacity: 3000 kg Year: 2015 Hours: 832 hours Battery: 24 V / 420 Ah

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 only robot,20% discount at order more then 1 robot. DEVELOPMENT OF GSG ROBOTICS Kodpfx Asxq Tvqjndsna GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Year of construction: 1988, condition: good (used), Second-hand stainless steel pressure STAWAG container 30 L (brewing keg) Year of manufacture: 1988 Producer: STAWAG Useful volume: 30 L Total Ø: 400 x 370 mm Knjdpfsb Tt I Ajx Andoa Test pressure: 4,5 bar Operating pressure: 3 bar Operating temperature: 130 °C

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Kodpfxszulx Eo Andjna Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, Year of construction: 2022, Extraction system Kodpfx Anjzu Ah Rodsna Manufacturer: Schuko Type: Solo-160-2323/30/182/BD Year of manufacture: 2022 Technical data - Length x Width x Height: 2400x2400x10000 mm - Airflow: approx. 15,500 m³/h - Type of dust: Plastic, chips (dry) - Filter hose diameter: 160 mm - Filter hose length: 3000 mm - Total filter area: 182 m² - Rotary valve: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, controller manufacturer: SIEMENS, controller model: SIMATIC HMI, overall weight: 670 kg, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FLATCOM M 30 was manufactured in 2015. It features a PC control unit with a touchscreen operator panel and an emergency stop button, ensuring user-friendly operation. The machine includes a Ruwac industrial suction system for efficient extraction and a coolant supply specified for ethanol. If you are looking to get high-quality machining capabilities, consider the ISEL FLATCOM M 30 vertical machining centre we have for sale. Contact us for further details. Knedezu Sa Aepfx Andoa • Control System: PC Control Unit with touchscreen operator panel & Emergency Stop button; secondary SIEMENS SIMATIC HMI Touch panel housed in a Rittal enclosure • Auxiliary / Extraction Equipment: Ruwac industrial suction/vacuum system with flexible hoses attached • Cooling/Lubrication Unit: Coolant/Lubricant supply specified for Ethanol ("Zu verwendender Kühl- + Schmierstoff: Ethanol") • Pneumatics: Integrated Festo pneumatic air preparation assembly with pressure regulator, pressure gauge, and filter units; KITA pressure sensor unit • Internal Enclosure Cooling: Cabinet air conditioning/cooling unit mounted on lower enclosure door • Enclosure Type: Fully enclosed aluminum profile frame with transparent safety glass/polycarbonate sliding doors and warning hazard signage

Condition: used, Year of construction: 1994, - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW Knodpfxezuy D Ao Andea Panel dividing saw Manufacturer: Panhans Type: 693 / EURO 30 Year of manufacture: 1994 Technical data: - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW - Rear support table (divided): 1 piece, 370 x 4910 - Rear support beams (with rollers): 9 pieces, 40 x 4910 mm - Front sliding support table (with 3 infeed rollers on the end): 3 pieces, 600 x 1800 - Miter table: adjustable - Air cushion miter table: adjustable - Angle table: left - Air cushion table left: up to 2020 mm - Clamping jaws: 7 pieces, floating Scoring jaws: 4 pieces Special accessories: Color screen, graphics, online I Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Knedpfszuy A Ssx Andsa Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2017, CARRIER AQUAFORCE 30XW 0852 INDUSTRIAL WATER CHILLER – 839 kW Industrial water chiller from the Carrier AquaForce range, equipped with a semi-hermetic screw compressor and Carrier Touch Pilot control system with touchscreen display. TECHNICAL DATA Manufacturer: Carrier Range: AquaForce Model: 30XW-0852 0050 Equipment type: Industrial water chiller Nominal cooling capacity: Approx. 839 kW Cooling capacity: Approx. 721,000 kcal/h Compressor type: Semi-hermetic screw compressor Compressor model: Carrier 067 Refrigerant: R-134a Refrigerant charge: 158 kg Maximum power input: 351 kW Control system: Carrier Touch Pilot Knodpfozvlniex Andoa Operator interface: Touchscreen display Approximate dimensions (L × W × H): 2,780 × 1,042 × 1,898 mm Weight: 3,274 kg