Used Position Controller for sale (47,905)

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Nledsk Abwlopfx Adrod Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: Nodoyalulepfx Adreld - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Condition: good (used), Limit switch, push button, safety switch, position switch, safety switch, safety limit switch, limit switch, limit switch -Manufacturer: Fanal, position switch limit switch with roller lever Nljdpfxjzmthxe Adrsd -Type: EWR 42/2 -Number: 1x switch available -Dimensions: 175/100/H100 mm -Weight: 0.7 kg

Condition: ready for operation (used), Siemens 1FT6105-8AC71-4EB1 synchronous servo motor, serial number SN.EL391811701003, used, with minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfxsx Duvrs Adrsld

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes Nodpfxov R E Rde Adrjld - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Nlodpfehik Ezsx Adred Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Nedpfx Aot Ac Efedrsld Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Nedpfx Adodzqm Rereld Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 Njdpfx Adozd Sg Iorold diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: Nodjznl Dujpfx Adrsld - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Year of construction: 2017, condition: used, Manufacturer: REGLOPLAS, Type: P161XL/40/SM85/S K/RT 100, Year of manufacture: 2017, Serial No. 113201170002, 113201170003, 44 kW, MC control system RT 200 +++ Attention: These units are part of an online auction! +++ Njdpfxszn An Ro Adrold

Condition: used, Year of construction: 2018, Manufacturer: ONI, Model: TCW90 Plus, Year of manufacture: 2018, Serial No. 18026, Heating capacity: 18 kW, Cooling capacity: 164 kW, MC control system Nlodpfjzn Anqjx Adred +++ Attention: This unit is part of an online auction! +++

Condition: good (used), Crane remote control, control head, crane control, crane control system, pendant control, control switch, control cylinder, command switch for manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grab, column jib crane -Manufacturer: Demag, Demag Manulift control switch with crane hook -Control switch: Type DSM4 -Crane hook: Load capacity 250 kg -Transport dimensions: 360/170/H200 mm Nledpfx Aszmf Abedrjd -Weight: 3.3 kg

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Nodon Nv Ugspfx Adreld Anodised aluminium profile 105x 90 mm Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, USB port for importing cutting lists

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. Nodpfx Ajriuutjdrold With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Elprom-Iskra, control switch for crane remote control Nlsdpfszmfdlsx Adrjd -Type: AKPT-64 -Dimensions: 245/65/55 mm -Weight: 0.4 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Faell, control switch for crane remote control -Type: KS-24a -Dimensions: 475/90/85 mm Nljdpfxezmfdfe Adrod -Weight: 0.8 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control Nlsdezmdvmepfx Adred -Manufacturer: Steel, control switch crane remote control -Type: SWH3 -Dimensions: 360/65/65 mm -Weight: 0.8 kg

Condition: ready for operation (used), Siemens 1FK7060-2AF71-1CH1 servo motor, serial number: YFJ0640129801006, without encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nedpfx Adezmlx Njrjld

Condition: ready for operation (used), Siemens SIMOTICS 1FT7084-5AC74-1NH0 synchronous motor SN: YFN1629189601004 - Encoder IC2048S/R I24 / Brake 24 VDC 24W 48Nm, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as shown in the photos Nodpfxezmlyas Adrold

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Model: Liquid Mate Sense Premium Year of manufacture: 2024 Condition: good Category ID: 661 Nodpfx Adozm Hahjrold Type: Monitoring and control of cutting fluids The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: new, MF-Inverter 1000Hz for resistance weldingmachines Nlodpfx Asyrx Nyjdred HWI 2806-2816 IQ Profil + HWS 2102 IQ Profil available from stock

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. Nlsdpfx Aezmyviodrjd 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Date of manufacture - 2024. Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Control unit: 1 x ROKK Processing Ltd Control Unit. Manufacturer: ROKK Processing Ltd Model: SP40BC Nlodsydlg Aspfx Adrod Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: 1 pump type ATH-1300M Nlodozmwmropfx Adred Maxi pump rotation: 34 000 RPM Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M (see technical details on photos) + 1 cable Used, functional, untested equipment