Used Prinzing Kse 31-12 for sale (28,502)

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Prsdpfoxyvx Tjx Ai Tec Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ Prodpfx Asu Nu Nkei Tec -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: good (used), Year of construction: 2019, The Durst Rho 312R is an industrial-grade, 3.2-meter roll-to-roll UV inkjet printer optimized for high-volume production of backlits, fine art prints, POP displays, and outdoor advertising. Manufacturing Year: 2019 Double side print option Colour configuration: 4 colors Mileage: 220.000m² only! In production Printhead status: some slots must be replaced Demo possible Location: Western Europe For further technical information please refer to attached brochure. Productivity & Speed • Maximum Output: Up to 240 m²/h to 274 m²/h in standard high-speed modes. • Boost Mode (Plus Variant): Up to 305 m²/h. • Production Mode: Roughly 128 m²/h to 130 m²/h. • Multi-Roll Printing: Supports simultaneous printing on two 1.6-meter rolls with independent queues Pjdpfxoz Hw Iao Ai Torc

Condition: used, machine/vehicle number: 1329046006, Part suitable for: DAF trucks Damage: none VAT/Taxation: VAT deductible Psdpfx Ajur S Hdji Tsrc Type number: 1329046006

Condition: used, mileage: 47,830 km, power: 206 kW (280.08 HP), first registration: 08/2003, fuel type: diesel, overall weight: 14,500 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total length: 10,000 mm, total width: 2,350 mm, total height: 3,300 mm, Year of construction: 2003, Equipment: ABS, air conditioning, compressor, MAN LE 14.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ---- First registration: 05.08.2003 Mileage: 47,826 km Operating hours of the ladder superstructure: 1,608 hours Operating hours of the vehicle: 2,150 hours Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4500 mm * Permissible gross vehicle weight: 14.5 t * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 l, right side * Adjustable steering wheel * Axle ratio i = 5.86 * Differential lock in rear axle * Medium-length cab * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat bench - manufacturer: GRAMMER * Air conditioning R134A * Exhaust pipe with tailpipe on the left * Auxiliary starter system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control * Stabilizers for front and rear axles * Headrests for driver and passenger * Cab rear wall with 3 windows * Heated and electrically adjustable exterior mirrors * Wide-angle mirror on the right, heated * Curb mirror on the right, heated and electrically adjustable * Electric windows on the left and right * 4-wheel parking brake (also on the front axle) * Tire chains on the rear axle * Winter tires 10R22.5 Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 PLCIII with rescue platform (rescue height approx. 30.75m). Max. outreach angle: 75 degrees, max. platform load capacity: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, outriggers: horizontal-vertical, variable outrigger width between 2,400 mm and 4,500 mm * Rotating beacon lights at the front and rear * Front and rear flashing lights * Air horn * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue basket stretcher, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with shut-off valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the crew * Load eye on the lower ladder, loadable up to 4,000 kg * Load eye on the basket segment (between ladder tip and rescue platform) for attaching a lowering device, 270 kg/400 kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel * 2 spotlights on the basket * Permanently installed battery charger Waeco PerfectCharge IU154A * Complete service booklet available, all maintenance performed annually Upon request and for an additional charge, a new 20-year inspection can be carried out, including hose replacement and inspection! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Prsdpfxjzw R Sio Ai Tec Subject to changes, prior sale and errors!

Condition: excellent (used), Laserdrucker Podpfx Aijz Np Urs Tjrc

Condition: new, functionality: fully functional, Year of construction: 2025, BODOR Laser Cutting Machine Model: P3015-12000W with 12 kW BODOR Laser Source Equipped with a shuttle table, programmable via CNC control system Configuration: - 12 kW BODOR Laser Source - Bodor Genius Laser Cutting Head - Bodor Thinker Control System - 21.5-inch monitor with touch function - Insert and dovetail plate welded segment bed - Bodor servo motor and driver - SMC oxygen regulating valve from Japan - Parker nitrogen regulating valve from America - Automatic nozzle changer (8 stations), nozzle cleaning, and calibration automatic - One-click processing - Bodor Lightning Perforation Technology - Automatic adjustment of cutting gas pressure (O2) - Protection when the door is open - Alarm function for cutting errors - Autofocus of the laser head - Expert database for laser cutting technology - Ergonomic remote control (Bodor Mango®) - Active anti-collision function - Intelligent maintenance reminder - WIFI internet connection - Bodor Cloud service - Water chiller - Stabilizing transformer - CE conformity Technical Data: Length with panel: 9,950 mm Width: 3,050 mm Height: 2,300 mm Weight: 8,300 kg Working area: 3,048 x 1,524 mm Max. workpiece weight: 1,450 kg Shortest pallet change time: 10 sec. Max. simultaneous speed: 200 m/min. Pjdpfxezd Eqgo Ai Tjrc Positioning accuracy: 0.03 mm Repositioning accuracy: 0.02 mm Screen size: 21.5 inches Number of shuttle tables: 2 Max. sheet thickness carbon steel: 35 mm Max. sheet thickness stainless steel: 30 mm Max. sheet thickness aluminum: 25 mm Max. sheet thickness brass: 16 mm Max. laser power: 12 kW Laser source type: Bodor Laser head: Bodor Genius Software: Bodor Thinker Including the following special accessories: - Extraction system (The connection/piping of the extraction system to the machine must be carried out by the customer) - Wear part set - Installation package - Including fully automatic loading and unloading module, Model: iTrans 3 Technical Data: Max. material size: 3,000 x 1,500 mm Min. material size: 1,000 x 1,000 mm Max. material thickness: 25 mm Min. material thickness: 1 mm Max. loading weight: 900 kg Max. loading weight for finished products in the trolley: 3,000 kg Dimensions loading module (L x W x H): 10,000 x 8,500 x 2,600 mm Weight loading module: 4,800 kg Errors and prior sale are reserved!

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Prjdpfs Afhr Tex Ai Toc Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: used, Year of construction: 2019, operating hours: 15,000 h, functionality: fully functional, overall weight: 10,000 kg, coolant supply: 60 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used SW BA312 horizontal machining center, year of construction 2019. Machine number: 2320012 Year of construction: 2019 Prodpfx Aez Ezk Nji Tec Weight: 100 kN Pneumatic pressure: 6.0 bar Air consumption: 0.5 Nm3/min Circuit diagram number: 233-000-10181-97 Nominal operating voltage: 3/PE /400V /50Hz Nominal working current: 123 A Fuse rating: 125 A If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2018, operating hours: 2,154 h, condition: ready for operation (used), overall weight: 11,000 kg, total width: 1,850 mm, total height: 2,890 mm, pressing force: 204 t, product length (max.): 3,580 mm, stroke length: 260 mm, Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details. • Hydraulic pressure: approx. 276 bar • Nominal power: approx. 15.3 kW • Power supply: 400 V / 50 Hz / 3 Ph • Production hours: 2,154 h Additional equipment • Included tooling: • V16 H80 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×2 mm • V50 H60 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • V12 H80 mm: 10 ×2 / 15 / 20 / 195 / 285 / 295 / 835 ×3 mm Prsdpfjz Hl Iuox Ai Tec • V80 H80 mm: 835 ×3 mm • V16 / V22 / V32 / V50: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • Additional tooling information: • ID 1177 – Standard – 85° – Height 65.50 mm – Radius 3.00 mm • ID 1271 – Standard – 60° – Height 115.00 mm – Radius 0.80 mm • ID 1284 – Standard – 60° – Height 135.00 mm – Radius 0.80 mm • TS-10.516 – Standard – 60° – Height 85.00 mm – Radius 0.80 mm Technical Specification Bending Length 3100 mm

Condition: used, mileage: 1,001 km, first registration: 01/1987, empty load weight: 280 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 1987, Equipment: crane, Vehicle location: Bovenden. Pjdpfx Asz H Tv Toi Torc Includes Kinshofer rotating head! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2020, Kuhn GMD 3125F MAS173660 Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale reserved. All information without guarantee. Predpfo Afmikex Ai Tjc

Condition: used, Year of construction: 2013, KUHN GMD 3120 F-FF, front-mounted disc mower, year of manufacture 2013, working width: 3.14 m, 7 mowing discs, three-point linkage, PROTECTADRIVE overload protection, spring suspension, 4-link mower suspension, FAST-FIT quick blade change system, PTO shaft. Offered price includes 19% VAT. The location may change; please inquire about the current location before visiting. Subject to changes, errors and prior sale. Podpfx Aio Ad D Izj Terc

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ----Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4575 mm * Permissible gross weight: 15 tons * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 liters, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Cab: medium length * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat - manufacturer: GRAMMER * Exhaust pipe for fire department * Quick start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers for front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Wide-angle mirrors, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake Psdpfxsxa Sbqo Ai Tjrc * Snow chains on the rear axle * Winter tires Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. outrigger angle: 75 degrees, max. platform load capacity: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontal-vertical, variable outrigger width between 2,400mm and 4,500mm * Special signal system * Front flashing light * Siren * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue sled, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with slide valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the platform crew * Load eye on the lower ladder, loadable with up to 4,000 kg * Load eye on the boom segment (between ladder tip and rescue platform) for attaching a lowering device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel * Complete service history available, all maintenance performed annually. Upon request and for an additional charge, a new 20-year service including hose replacement and inspection is possible! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: Prsdpewlxbdofx Ai Toc * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale, and errors!

Condition: excellent (used), Hilge MAXA 125-315-CN Centrifugal pump Single stage end suction centrifugal pump, mounted on skid with Siemens 15Kw motor, flow rate 250M3/h Predps Ad Ri Ejfx Ai Tjc

Condition: new, Holzprofi panel saw KS315 incl. scoring unit, smooth running format sliding table with large outrigger table, saw blade tiltable, fine adjustable parallel rip fence incl. mitre fence and eccentric clamps. Very stable guidance of the format table for precise working even with heavy work pieces. With own motor for the scoring unit for an easy deactivation. Technical data: Main motor outputS1 4 kW Scoring motor output S1 0,75 kW Voltage 400 V Saw blade tilting 0-45° Prjdpfsvru T Dox Ai Tec Format table size 3200 x 375 mm Blade dimensions 315 mm Cutting depth 100 mm Scoring saw blade 120/20 mm Speed saw blade 4500 RPM Speed scoring saw blade 8000 RPM Cutting width 1250 mm Weight 700 kg

Condition: used, Year of construction: 1993, Front loader, year of manufacture 2012 ENGINE PTO 540/750/1000 RPM POWER LIFT TURBO CLUTCH TRANSMISSION 40 KM/H GEARBOX 21/21 40 KM/H HEATING WITH THREE-SPEED FAN ADJUSTABLE FRONT FENDERS / ALL-WHEEL DRIVE ALTERNATOR HYDRAULIC RETURN FLOW COMFORT AND REVERSING GEAR Predpfxs Agbaxs Ai Tjc HEADLIGHTS H4 (DRIVING LIGHTS) ROOF – HIGH WITH WINDOW, TINTED AUXILIARY VALVE DW CENTER 1C REAR 1D 1/1 AUXILIARY VALVE EW CENTER 2A REAR 2B 1/2 AUXILIARY VALVE DW CENTER 3C REAR 3D 1/3 3-POINT HITCH CAT. 2-3, LONG DRAWBAR FRONT POWER LIFT WITH PTO 1000 RPM

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,400 mm, total height: 3,170 mm, Year of construction: 1998, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC II aerial ladder – Registered: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 hours Base vehicle equipment: * Suspension type: leaf spring rear axle * Wheelbase: 4250 mm * Permissible gross vehicle weight: 15 t * 7-speed manual transmission * Fuel tank: 127 l, located under the platform at the rear * Differential lock in rear axle * Stiffer rear springs and shock absorbers * Front spring: torsion bar, reinforced stabilizer and shock absorbers * Co-driver's double bench seat * Exhaust pipe for fire department, positioned in front of the front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for co-driver * Cab rear wall with 2 windows * Electric window lifter on the right * Heated and electrically adjustable rear-view mirror with wide-angle mirror * Ramp mirror on the right * Rotating beacon, blue light, and siren * Front flashing blue light Aerial ladder equipment: * Metz aerial ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75m) Max. outreach angle: 75 degrees, Max. basket load capacity: 270 kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger system: horizontal-vertical, Variable outrigger width between 2,400mm and 4,500mm * Folding rescue basket for 3 people * 2 LED spotlights 24V at the front of the rescue basket * Load eye at the top of the lower ladder, on the reinforced ladder support, for lifting, lowering and pivoting loads * Mounting bracket for portable generator 5kVA on the turntable * 2 halogen spotlights 24V / 70W at the head of the lower ladder with Teleflex control from the main control station * 400V power supply, protected in the ladder support, to the top of the upper ladder including socket and power supply with plug from the generator on the turntable * Bridge cable from the head of the upper ladder to the rescue basket with 1 socket 400V and 2 sockets 230V in the rescue basket * Fixed water line in the lower ladder * Adjustable spray nozzle, mountable in the rescue basket * Storage for adjustable spray nozzle * METZ stretcher holder SLK 111 including storage on the platform * Box for storing the stretcher in the platform * Siren with 4 sound cups instead of BOSCH high-tone horn * Fixed charger 230V / 24V * Service booklet available, all maintenance performed annually ----Ready-to-drive vehicle from first owner, ladder system only works sporadically - defects present! Non-smoking vehicle! Your contact person for this vehicle: ---- Prsdpfx Ajxa Sbwji Tjc Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor Pedpszvd U Iefx Ai Tsrc - Feeder for cases - Case bending station: DBA - Foil transporting device - Case set up outside machine - Matrix plate 2 - Counter stacker

Condition: used, Year of construction: 2017, KUHN GMD 3125F-FF, front-mounted disc mower, year of manufacture 2017, working width: 3.10 m, 7 mowing discs, OPTIDISC ELITE cutter bar, FAST-FIT quick-release knife system, PROTECTADRIVE disc drive overload protection, hydraulic cutter bar lift system (LIFT-CONTROL), hydraulic lift, PTO shaft, lighting. Offered price includes 19% VAT. The location may change; please inquire about the current location before visiting. Subject to changes, errors and prior sale. (internal: 0568) Psdpfx Ao Ad Duzoi Tsrc

Condition: used, Semi-automatic pallet wrapping machine, stretch wrapping machine Design with a horseshoe-shaped rotating platform for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Rotating platform: with fork recess Rotating platform diameter: 1500 mm Adjustable rotating speed of the rotating platform Motorized film pre-stretch adjustable to 100% or 200% Rotating table height: 75 mm Wrapping programs Program 1: Double wrapping with raising and lowering of the film carriage Program 2: Double wrapping with raising – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only raising of the film carriage Program 4: Simple wrapping with raising of the film carriage and pause for attaching the top cover Pedpfopygwqsx Ai Torc Intended use Wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: used, mileage: 79,875 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, empty load weight: 14,165 kg, maximum load weight: 835 kg, overall weight: 15,000 kg, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: other, emission class: euro3, suspension: other, number of seats: 3, total length: 10,000 mm, Year of construction: 2006, operating hours: 6,922 h, construction height: 3,350 mm, Completely overhauled in 2023 Last inspection: November 10, 2025 The MAN LE 14.280 as a turntable ladder truck is an exceptional special-purpose vehicle that combines robust MAN commercial vehicle technology with a demanding and versatile range of applications. Thanks to its special design, this vehicle offers interesting possibilities for fire departments, municipalities, emergency response organizations, and companies seeking a high-performance vehicle for specific tasks. With a displacement of 6,871 cm³, the MAN features a solid and performance-oriented engine designed to meet the requirements of a heavy-duty emergency vehicle. The low mileage of only 79,875 km is particularly noteworthy. For a vehicle with initial registration in December 2006, this mileage is exceptionally interesting, making the MAN LE 14.280 an attractive opportunity for buyers looking for a specialized commercial vehicle with a relatively low mileage. The design as a turntable ladder truck opens up a broad spectrum of possible applications, making this vehicle a special addition to Prsdpoy Rgn Asfx Ai Tjc corresponding vehicle fleets. At the same time, the proven MAN platform provides a solid foundation for professional use and demanding daily operations. Anyone looking for a distinctive special-purpose vehicle with low mileage and proven MAN technology should take a closer look at this MAN LE 14.280. It is an interesting opportunity for fire departments, municipalities, and specialized users who are looking for a versatile emergency vehicle with exceptional added value. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2023, 23 electric motors from various manufacturers are offered. 1) 4 × Innomotics 1AV3104A, power: 3kW, year of manufacture: 2024. 2) Hoyer HMA3-132S1-2, power: 5.5kW, year of manufacture: 2021. 3) 2 × Innomotics 1CV3073A, power: 0.55kW, year of manufacture: 2024. 4) WEG W22 02P71, power: 0.55kW, year of manufacture: 2023. 5) 4 × Siemens 1AV3205B, power: 30kW, year of manufacture: 2020. 6) WEG W22 160L-04, power: 15kW, year of manufacture: 2021. 7) FOA AC motors, power: 2.2kW. 8) 4 × WEG W22 100L-04, power: 2.2kW, year of manufacture: 2022. 9) VEM K21R 112 M 6-4 L H TPM140, power: 1/3kW, year of manufacture: 2022. 10) 2 × CEM TCE 80MCY 4 V1, power: 0.55kW. 11) WEG W22 06P90S, power: 0.75kW, year of manufacture: 2024. 12) WEG W22 160M-06, power: 7.5kW. Inspection possible by arrangement. Prjdpfozvghqjx Ai Tsc

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. Pedpfx Ajqxandji Terc In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.