Used Rapid 3028 Kb for sale (4,176)

Year of construction: 1996, condition: good (used), functionality: fully functional, Manufacturer: Rapid Model: 1521-L Year of manufacture: 1996 PRICE REDUCED FROM 1100 TO 950 EUR!!! Ijdpfx Asvndpajcpebc

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Iedpfoz Eh Nrjx Acpjbc Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: ready for operation (used), 1 used bed type milling machine Manufacturer: Knuth Model: KB 1400 Year: 2006 Technical Specifications: Working Area Distance spindle axis to table surface: 150 mm – 650 mm Isdpfx Acsxnp Epjpjbc Number of T-slots: 3 Table clamping surface: 1400 mm x 400 mm T-slot width: 18 mm T-slot spacing: 100 mm Height adjustment speed (max.): 1670 mm/min Travel X-axis travel: 950 mm Y-axis travel: 400 mm Z-axis travel: 500 mm Vertical Milling Head Spindle taper: SK 50 DIN 2080 Overhang: 510 mm Spindle speed (vertical): 30 rpm – 1800 rpm Quill stroke: 105 mm Head swivel range: ±30° Rapid Traverse Rapid traverse X-axis: 1670 mm/min Rapid traverse Y-axis: 1670 mm/min Rapid traverse Z-axis: 1670 mm/min Feed Feed speed X-axis: 18 mm/min – 627 mm/min Feed speed Y-axis: 18 mm/min – 627 mm/min Feed speed Z-axis: 18 mm/min – 627 mm/min Drive Capacity Main drive motor power: 7.5 kW Feed motor power: 0.75 kW Z-axis motor power: 0.75 kW Coolant pump motor power: 0.04 kW Dimensions and Weight Coolant pump flow rate: 12 l/min Dimensions (L x W x H): 2.29 m x 1.77 m x 2.12 m Weight: 3660 kg

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 Iedpfx Acei I Hc Aepsbc -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm - Blade speed 2800 rpm Iodex N R H Tepfx Acpebc - Weight approx. 1500 kg

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 950 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,120 mm, total width: 1,770 mm, overall weight: 3,660 kg, spindle speed (max.): 1,800 rpm, product length (max.): 2,290 mm, number of axes: 3, This 3-axis KNUTH KB 1400 was manufactured in 2018. It features a travel of 950 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed range of 30 to 1800 rpm and a table setup area of 1400 mm x 400 mm. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1400 vertical machining centre we have for sale. Contact us for further details. • Feed • Feed speed X-axis: 18–627 mm/min Ibedpfjzgfiusx Acpjc • Feed speed Y-axis: 18–627 mm/min • Feed speed Z-axis: 18–627 mm/min • Rapid feed • Rapid feed X-axis: 1670 mm/min • Rapid feed Y-axis: 1670 mm/min • Rapid feed Z-axis: 1670 mm/min • Vertical milling head • Throat: 510 mm • Spindle speed (vertical): 30–1800 1/min (rpm) • Quill stroke: 105 mm • Head swivel range: ±30° • Working area • Spindle axis-to-table surface distance: 150–650 mm • Table set-up area: 1400 × 400 mm • Number of T-slots: 3 • T-slot width: 18 mm • T-slot spacing: 100 mm • Speed height-adjustment (max.): 1670 mm/min • Coolant pump flow rate: 12 l/min Technical Specification Taper Size SK 50

Year of construction: 2016, condition: as good as new (ex-display), 3x piece docking mills Rapid Type: G15042 Docking Ibedpjlwqtbjfx Acpjc G15035 Docking Year 2016 ,2010, 2009

Condition: used, Year of construction: 2007, machine/vehicle number: 1624, Description Type: Glazing bead saw for PVC window profiles Year of manufacture: 2007 Motor power: 2 × 0.45 kW Saw blades: 2 × 200 mm diameter Iodpoxxz A Ujfx Acpobc Feed: Pneumatic Profile clamping: Pneumatic Application area: Precise cutting of glazing beads for window frames

Year of construction: 2004, condition: excellent (used), Mill Rapid 1528, 2.2 kW, inlet 38 x 42 cm, height 173 cm, 12 knives, 2 pastry boards, 2002, 2004. Isdpfx Acjyzmw Eepjbc

Condition: used, Year of construction: 2003, used, good condition Machine cleaned, lubricated, partially overhauled. Various wear parts replaced. Test run with settings. Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Cutting height max.: 280 x 50 mm Max. blade diameter: 420 mm Manual tilt: 45° Linear feed: pneumatic Digital displays for cutting length 4x pneumatic workpiece clamping - 2x horizontal, 2x vertical Cylinders: 2 horizontal, 2 vertical Space requirement approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Ibsdpfxoyclxpe Acpjc Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! Iodpfx Aszln D Eocpobc TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Ibjdpfezp Slzex Acpoc Drive motor: 22 kW

Condition: used, Year of construction: 2017, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, power: 26.7 kW (36.30 HP), We are offering this used Hobart 305GH dry steam convection oven / rapid steam oven, manufactured in 2017. Model: 305GH Serial number: 970221933 Rated voltage: 400 V Iedsz Riwcopfx Acpjbc Frequency: 50/60 Hz Phases: 3+N Connection power: 26.7 kW Current: 38.7 A Water inlet pressure: 1.7 - 10.0 bar Operating pressure: 1.0 bar Protection class: IP33 ML number: 305GH-31 Year of manufacture: 2017 If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Funnel opening: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm Ibodpszn Iqksfx Acpsc -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Year of construction: 2017, condition: used, Pneumatic material feed Travel length: 800 mm (multi-stroke possible, max. 2,400 mm) Max. saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade RPM: 2850 revolutions per minute. Iodpfxskrgiuo Acpobc Continuously adjustable saw feed Minimum quantity spray device Piece counter with shut-off automatic Weight: 600 kg

Year of construction: 1992, condition: good (used), functionality: fully functional, Manufacturer: Rapid Type: 1415 Ibodeyyp Uqopfx Acpsc Grinding chamber dimensions: 150 x 140 mm Power: 1.5 kW New knives

Condition: used, Year of construction: 1988, Panel saw Manufacturer: Rapid Model: PK 100 Year of manufacture: 1988 Iodpozuynbsfx Acpebc Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Iedpfx Acozlnxijpobc Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Ibjdpfsy D Rk Iox Acpsc Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: ready for operation (used), functionality: fully functional, RAPID Machinery Generation III automatic hot foil stamping machine, designed for industrial printing and packaging applications. The machine features two heated stamping heads, digital temperature control and continuously adjustable speed. Heavy-duty construction ensures stable and reliable production. Technical Specifications: • Manufacturer: RAPID Machinery Co. (Sydney, Australia) • Machine type: Automatic hot foil stamping machine • Series: Generation III • Number of stamping heads: 2 heads Iedpfx Asyghr Hjcpsbc • Head positioning: adjustable left / right • Maximum stamping width: approx. 300–350 mm • Maximum material thickness: approx. 0.1 – 1.5 mm • Processable materials: paper, cardboard, plastic substrates • Temperature range: approx. 80 – 200 °C • Temperature control: independent digital control per head • Operating speed: continuously adjustable • Operating modes: automatic / single pull • Counter system: digital batch counter • Drive system: electric • Power supply: 3-phase, 400 V, 50 Hz (typ.) • Safety equipment: emergency stop, CE-compliant safety system • Frame construction: heavy-duty industrial steel frame • Country of manufacture: Australia

Condition: good (used), Rapid DGS Double Mitre Saw – used, fully operational, ready for demonstration For sale is a Rapid DGS double mitre saw in good, well-maintained used condition. The machine is immediately ready for use and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS High-precision double mitre saw for aluminium, plastic, and, where applicable, light metal profiles Sturdy, robust construction Mitre cuts possible (both saw heads adjustable) Clean, technically sound used condition Cutting length: 4 m Saw blade: 3700x3.6/3.0x30 Z=108TF negative Machine dimensions (LxWxH): 5 m x 1.20 m x 1.50 m Cutting angles: 45-90° Condition: The machine is in fully functional condition. All functions can be tested live during inspection. Ibsdpfjxzdviox Acpec Inspection & Collection: Inspection by appointment is possible. Collection by the buyer – loading assistance available if required (crane and forklift on site). Price: Negotiable If interested or if you have further questions, please feel free to contact us!

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Iodpsz D Hzqofx Acpebc

Condition: used, Year of construction: 2019, machine/vehicle number: 1799-260029, KNUTH KB 1400 Bed-Type Milling Machine The KNUTH KB 1400 is a robust and heavy-duty bed-type milling machine designed for machining large workpieces and demanding cutting tasks. The vertical milling head can be swiveled by ± 45°, allowing for milling operations at various angles. Technical Specifications: Ibodpozyy Rtsfx Acpec Table clamping area: 1,400 × 400 mm Table travel X / Y: 800 / 400 mm X-axis travel (special version): 1,000 mm Spindle mount: ISO 50 Distance between spindle axis and table: 650 mm Overhang: 520 mm Spindle speed: 18 – 1,800 rpm Max. swivel angle of milling head: ± 45° Quill travel: 105 mm Feed rate: 18 – 627 mm/min, 9 steps Max. height adjustment speed: 1.67 m/min Main drive motor power: 7.5 kW Max. drilling capacity: 40 mm

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Requires repair – control system is not functioning Year of manufacture: 1993 Cutting length: 5000 mm Shortest section length: 350 mm Ibjdoyxy S Dspfx Acpec Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are clearing space Affordable machine – ideal for export

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION Ibjdpfsxn T Smjx Acpsc The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).