Used Rego Sm 2000 for sale (11,802)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Lasdpfszizkyox Ahajh Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Laodpfxozlb D Se Ahaeh Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: good (used), 732 USED Confectionery beater, model SM 4, Rego. EXTERNAL DIMENSIONS (in cm): - W: 70, Ljdpfx Aort Uv Tehaoah - L: 65, - H: 150. EQUIPMENT: - 2 cauldrons (capacity: 40 l) - 4 rods The device ready to be viewed is in our warehouse (36-068 Bachórz, Poland) The price is a net price Our languages: ENGLISH, GERMAN, FRENCH, UKRAINIAN, RUSSIAN.

Condition: good (used), 731 USED Confectionery beater, model SM 3, Rego. Capacity range: 20-30l. EXTERNAL DIMENSIONS (in cm): Ljdpsrt Tgxjfx Ahasah - W: 65, - L: 70, - H: 165. EQUIPMENT: - cauldron (capacity: 30 l). The device ready to be viewed is in our warehouse (36-068 Bachórz, Poland) The price is a net price Our languages: ENGLISH, GERMAN, FRENCH, UKRAINIAN, RUSSIAN.

Condition: good (used), 419 USED Pastry beater, confectionery mixer. EXTERNAL DIMENSIONS (in cm): - length: 70, Laodpfx Ajzd Dk Sohash - height: 171, - width: 70. - kettle: 39/34. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), 145 USED Pastry beater, confectionery mixer. EXTERNAL DIMENSIONS (in cm): - L: 55, - H: 140, - W: 60. EQUIPMENT: - 1 kettle: depth 25, diameter 30, - 1 kettle: depth 30, diameter 30, - 1 whisk. - 1 hook. Laodpfoxdkhdsx Ahash The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Laedpfjzi Sfzsx Ahash Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical specifications: - Mobile version with motorized forward/reverse movement + steering - Motorized oscillating stroke, forward/reverse, with speed control - Oscillating stroke, longitudinal, forward and backward - Motorized contact pressure - oscillating pressure adjustment - Grinding belt dimensions approx. 2000 x 50 mm Laedpfxsi Apb Ne Ahaoh - Contact disc B 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Year of construction: 2020, condition: ready for operation (used), A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible. Lajdpfx Ajzh Niujhaeh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Rego Mixing Machine SM32 Laedpfxsz N Hmle Ahajh Stainless steel version Detailed specifications can be found on the nameplate. Accessories: One kettle and two mixing paddles Telephone number: Export price: €6,800

Condition: excellent (used), Year of construction: 2004, Description to follow! Lsdpfxexy S D So Ahasah

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning Lodpfx Ahez N Ixcoajah 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Lasdpfxox Sauls Ahajh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total length: 640 mm, total width: 470 mm, total height: 150 mm, Stainless steel base with hole Lajdpfxjd Dzr Ho Ahajh suitable for Rego SM 2 Dimensions: 470 x 640 x 150 mm, WxDxH

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS Lasdpexv D Hqsfx Ahaeh The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps Lasdpfxexaaahj Ahaoh * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: good (used), Year of construction: 2006, functionality: fully functional, QUICK SALE / FAST PURCHASE Daewoo Puma 2000SY lathe + LNS 1.5 m bar feeder. Year of manufacture: 2006 Numerical control: FANUC 18i-TB Maximum diameter over the bed: 600 mm Maximum turning diameter: 330 mm Maximum turning length: approx. 510 mm Laedpfxo Ad Ic Ao Ahajh X-axis travel: 250 mm Z-axis travel: 580 mm Y-axis travel: ±50 mm Sub-spindle travel: approx. 580 mm Bar capacity: 65 mm Main spindle speed: up to 4,500 rpm Main spindle power: approx. 15–18.5 kW Sub-spindle speed: up to 6,000 rpm Sub-spindle power: approx. 7.5 kW Tool positions in turret: 12 Motorized tool speed: up to 5,000–6,000 rpm Motorized tool power: approx. 3.7–5.5 kW Approximate weight: 4,850 kg

Year of construction: 2019, condition: excellent (used), 417 USED Confectionery whisk, model SM 2 by Rego. EQUIPMENT: Lasdpfx Ahshr Rxtoajh - 2x pot (capacity: 20 l) -1 whisk The device ready to be viewed is in our warehouse (36-068 Bachórz, Poland) The price is a net price WE SPEAK IN ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Year of construction: 2016, operating hours: 4,614 h, condition: used, functionality: fully functional, machine/vehicle number: Optimel OM2000, We are offering two used Optimel OM2000 potting machines, including Nordson MX4003 melting units, for sale. These machines are suitable for industrial applications in the field of hot melt potting / low-pressure molding, for example, for the protection and encapsulation of electronic components, connectors, and assemblies. The Optimel OM2000 is a proven machine series for medium to large-scale production and offers flexible application possibilities in industrial manufacturing processes. Available machines: Lajdpfs Adqzhex Ahajh System 1 Potting machine: Optimel OM2000 Year of manufacture: 2016 Melting unit: Nordson MX4003 Year of manufacture (melting unit): 2016 Operating hours: 4,614 h Price: €24,900 (negotiable) System 2 Potting machine: Optimel OM2000 Year of manufacture: 2016 Melting unit: Nordson MX4003 Year of manufacture (melting unit): 2017 Operating hours: 2,551 h Price: €24,900 (negotiable) Technical features of the Optimel OM2000 series: Siemens S7-1200 control system with touch panel Max. operating temperature: 250 °C Adjustable melting pressure: 5–40 bar Melting capacity: 2–15 kg/h (depending on the melting system) Electrical connection: 400 V / 50 Hz Power consumption according to data sheet: 4.5 kW Suitable for industrial series production Flexible integration into existing manufacturing processes The technical specifications refer to the OM2000 series according to the manufacturer's data sheet. The specific equipment of the machines offered may vary depending on the configuration. Prices and sale: Individual price: €24,900 (negotiable) per system Package price for both systems: €45,900 (negotiable) Both systems are preferably sold together. An individual sale is also possible. The machines can be inspected by appointment. If you are seriously interested or have questions about the equipment, condition, and availability, we look forward to hearing from you. Further information and technical documents can be provided upon request. Note: Sale of used industrial machines. The exact terms of sale will be agreed upon individually.

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 Lodpoxv Dywofx Ahasah The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Year of construction: 2021, condition: new, for grinding belts max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel max. diameter 80 mm x 80 mm Laodegxuhmjpfx Ahajh

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Lajdpfx Ajvanrcohajh Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, distance between stands: 1,250 mm, type of input current: three-phase, position of the milling head: Vertical, overall weight: 14,000 kg, spindle motor power: 25,000 W, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS General Information Machine type: Portal milling machine Manufacturer: Nicolás Correa Model: EURO 2000 Year of manufacture: 2002 Retrofit: 2024 Machine weight: 14,000 kg CE marking: present Control System Control system: Heidenhain TNC 530 Handwheel: Heidenhain HR-410 Work Table and Working Area Ledps Aaytfsfx Ahaoah Work table: 2,000 × 1,000 mm Travel in X-axis: 2,000 mm Travel in Y-axis: 1,250 mm Travel in Z-axis: 650 mm Column spacing: 1,250 mm Spindle Spindle design: direct-drive motor spindle head Spindle power: 25 kW Spindle speed: max. 12,000 min⁻¹ Tool interface: HSK 63 Tool Changer Tool changer: 24 positions Coolant System and Chip Disposal Coolant system: external Internal cooling: through the spindle head Chip conveyor: present Axes and Rotary Table Rotary table/indexing table: stepless Additional axes: 4th and 5th axis Machine Dimensions Length: 6,500 mm Width: 3,600 mm Height: 4,000 mm EQUIPMENT Heidenhain TNC 530 control system Portable handwheel Heidenhain HR-410 Automatic tool changer with 24 positions External coolant system Internal coolant supply through the spindle head Chip conveyor Stepless rotary table or indexing table for the 4th and 5th axis Fully enclosed working area enclosure

Condition: used, functionality: fully functional, input voltage: 400 V, total width: 850 mm, total length: 1,980 mm, total height: 1,325 mm, - Standard internal memory with 37 programs, each with a maximum of 20 stages - Mechanical height adjustment of the bowl - Wide range of bowl height adjustment, allowing the bowl to be removed without removing the tool - Precise recipe preparation thanks to digital time and speed indicators and automatic electronic shut-off - Automatic, computer-controlled start-up program protects the tool and machine - Automatic, slow lowering of the tool while the bowl rises - Excellent safety with two-hand operation - Protective cover made of impact-resistant plexiglass; optionally available in stainless steel or as a safety guard - With protective housing - Easy to move thanks to its low weight and compact dimensions - LED for bowl illumination - Quick-change system for tools Lasdpfsz Inntex Ahajh - Easy to clean, particularly quiet - GS safety mark for reliable safety

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency Lasdpfx Ahjzul Dbjajh • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.