Used Renner Rsf-Pro 2-30 for sale (91,417)

Condition: refurbished (used), Year of construction: 2017, Vutek H2000 UV Hybrid Printer Lsdpfxeyzg Tys Ammshh fully refurbished with 3-month warranty Colors: 6C CMYL LCLM, 2 White Resolution: 1000 dpi with 7pl Ultradrop Print width: 205 cm, print height: 5 cm Speed up to 90 m²/h

Condition: new, functionality: fully functional, machine/vehicle number: 15162333, empty load weight: 620 kg, maximum load weight: 2,380 kg, overall weight: 3,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,500 kg, loading space length: 4,150 mm, loading space width: 2,050 mm, loading space height: 350 mm, total length: 5,565 mm, total width: 2,100 mm, tire size: 13 Zoll, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 2050 mm x 4150 mm External dimensions approx. 2100 mm x 5565 mm Permissible total weight: 3000 kg Payload: approx. 2380 kg (payload may vary depending on additional equipment) Manufacturer: Variant Special features - Variant High-loader Pro Line 3021 P4 - 350 mm aluminium drop sides (foldable/removable) - 10 lashing eyes in the floor frame profile, rubber-coated, 500 daN (kg) - Toolbox mounted (front right side under the loading area) - Ramp compartment (ramps not included, available as accessory) - Removable steel corner posts - Removable H-frame - Vehicle registration documents included Additional equipment - Flooring: phenolic resin-coated non-slip and waterproof plywood - Welded steel frame - Reinforced cable (spiral cable) - Internal long lever fasteners Chassis - Knott rubber torsion axle | V-drawbar with ball coupling | heavy-duty automatic jockey wheel | automatic reverse system Electrics Lsdpfxjy I Tnqs Ammehh - 12 Volt | 13-pin plug | side marker lights | position lights

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 198 kg, total length: 740 mm, total width: 554 mm, space requirement height: 1,014 mm, power: 7.5 kW (10.20 HP), volume flow: 1.09 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Stock machine, immediately available in 10 bar version incl. the options: - Direction of rotation control No.10867 (€230,-) - Sound insulation box (noise reduction by approx. 4 dB, +14 kg, length +200 mm) No.20902 (€439,-) 7.5 - 10 - 13 - 15bar possible at very short notice 2-year full functional guarantee Easy to maintain thanks to easily removable doors The right solution for every requirement: as a free-standing system, with attached refrigeration dryer and as a complete unit on pressure vessels in various sizes Intensive cooling in conjunction with an effective aftercooler guarantees operational safety and good air quality Developed for industrial use - even in continuous operation Standard components from German brand manufacturers offer a high quality standard and flexibility in the event of faults Powerful compact compressor stages with integrated oil control valve Effective sound insulation box and multiple bearings on vibration metals enable low-noise and low-vibration operation Controlled via the RENNERlogic Optionally available: RENNERtronic / RENNERtronic Plus control system Options: Direction of rotation monitoring via phase sequence relay RENNERtronic electronic control unit RENNERtronic Plus electronic control unit Lhodsvb Agwepfx Ammjh Sound insulation box (noise reduction by approx. 4 dB, +14 kg, length +200 mm) Super sound insulation box (sound reduction by approx. 6 dB, +23 kg, length +280 mm) Exhaust air box Filter grille for sound insulation box (2x required)

Condition: excellent (used), Year of construction: 2009, RENNER 18,5Kw VALVE COMPRESSOR! Screw compressor RENNER RSF 18.5 machine with inverter and heat exchanger after service Technical data: Ljdstqc D Ejpfx Ammohh capacity: 2.62 m3/min (2620/min); motor power; 18.5 KW; pressure: 10 bar; mileage;1972h Year 2009 net price 12200 gross price 15006 Compressor fully operational, we provide service.

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Main Features: Lhjdpfx Aouwqbxommeh Front supports: 2 pieces, ensuring stability during bending operations X-axis AUTOMATIC SERVO Axes Y1, Y2, – AUTOMATIC (optional SERVO motor) R-axis – Automatic SERVO Automatic adjustment / compensation of the deflection arrow Front support on linear guides As standard, the machine is equipped with hardened, divided punches and 4V (42CrMo) dies Machine Description Ultimate press brakes are an advanced tool used in the industry for edge processing and bending materials. It is a versatile device that allows precise and effective finishing of edges of various types of materials, such as steel, aluminum and plastics. Ultimate press brakes have been designed with efficiency and reliability in mind. It is equipped with a solid structure that ensures stability during operation. The machines also have advanced control systems that allow programming of various operating parameters, such as edge speed, bending angle and pressure force. One of the main advantages of the Ultimate press brakes is their ease of use. The intuitive user interface allows the operator to easily program and control the machining process. Additionally, the presses are equipped with advanced safety systems that ensure safe use. Thanks to their high performance, the EASY press brakes are the ideal solution for manufacturers who require fast and precise edge processing. It can be used in various industries, such as the metal industry, carpentry, furniture production and the plastics industry. Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 550 mm (option 620mm) Maximum stroke of moving beam 200 mm (option 300mm or 400mm) Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 650 mm (option 1000mm) SERVO motor power 7.5 kW Length 3870 mm Width 1600 mm Height 2600 mm Weight 7500 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 66342/1B, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, conveyor belt speed: 50 mm/s, total height: 2,100 mm, input voltage: 480 V, input frequency: 60 Hz, For sale is a high-quality Schuma incline conveyor from the professional PRO-WAA series. Thanks to its robust construction, this belt is ideal for continuous industrial operation. Technical data: Manufacturer: SCHUMA GmbH Model: PRO-WAA 800/2000/400/300/S20 Serial number: 66342/1B Year of manufacture: 2023 Voltage: 480 V Frequency: 60 Hz Power: 0.18 kW Dimensions & geometry: Overall width (belt): approx. 400 mm Horizontal length (lower): approx. 800 mm Incline section (length): approx. 2000 mm Horizontal length (upper/discharge): approx. 300 mm Lodpjy Ec Uzjfx Ammohh Cleat height: 20 mm (S20) – ideal for small parts, granulates, or plastic components.

Condition: new, Year of construction: 2026, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value Lhedpfsw H Rauex Ammsh 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Chuck key and tool post wrench Service tool kit CE-compliant safety guards

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4000x2900x2100 mm Weight 2500 kg Total power requirement 20 kw Ledpfx Amev A Hbhemohh

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l Lhodpfxex I Izrs Ammoh - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis Ledpjx D Ribefx Ammehh • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: excellent (used), Year of construction: 2009, volume flow: 1.45 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RSF 11 SCREW COMPRESSOR Variable speed (inverter) 11 kW motor Capacity 1.45 m³/min Lhedpfxsyuiqyj Ammsh Pressure 10 bar Year of manufacture 2009

Condition: used, Year of construction: 2017, operating hours: 13,305 h, functionality: fully functional, machine/vehicle number: 739011, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, Equipment: documentation/manual, type plate available, Screw compressor Renner RS-Pro 7.5 - 1090 l/min - Power: 7.5 kW - Year of manufacture: 2017 - Operating hours: 13,305 h Lhsdpfxjyn I Rre Ammeh

Condition: used, Year of construction: 2014, functionality: limited functionality, travel distance X-axis: 3,048 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 15 m/min, spindle speed (min.): 3,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, We are offering this used Buth Graviersysteme PRO 2030 ATC CNC milling machine, year of manufacture 2014. Manufacturer: Buth Graviersysteme GmbH & Co. KG Model: PRO 2030 ATC Serial number: 150622 Year of manufacture: 2014 Condition: used Electrical connection voltage: 380–400 V Electrical connection frequency: 50 Hz Lhodpjyazaqjfx Ammoh Technical specifications: - Working area: 3048 x 2032 x 300 mm (X x Y x Z) - Table: Phenolic vacuum high-pressure table - Feed rate: 35 m/min (X/Y), 15 m/min (Z) - Drives: 850W YASKAWA AC servomotors - Resolution: 0.001 mm, repeatability: 0.01 mm - Data formats: HPGL – 3D / G-code - Spindle: 12 kW HSD, 8-position carousel tool changer - Speed: 3,000 – 24,000 rpm - Tool holder: HSK63 / ER40 / 26 mm - Weight: approx. 4,500 kg - Control: Fagor 8055 plus CNC controller - Connections: 380/415 V / 50 Hz Equipment & accessories: - Robust steel base frame - Precision ball screws on all axes (X axis with dual drive) - High-precision linear guides - Protective covers for drive axes - Extraction hood for chip extraction - Automatic mist cooling (2 containers) - Material sensor - Planing head 80 mm with HSK63 holder - Becker U4.250 SA/K vacuum pump, 3 mbar final pressure - Ulmatec extraction unit IES 2-8-2 / 2.2 MD - Control software / milling software - 8x HSK63 tool holders - ER40 collet chuck set (3–26 mm diameter) Condition & maintenance: The machine is in good used condition and was in regular operation until recently. Important for the future buyer: Currently, the machine is out of service as the bearings and drive belts need to be replaced. The milling machine generally operates, but both axes no longer run precisely parallel – a normal wear issue that can occur with machines of this type after some time. These works should be carried out once the machine is located at the buyer’s site. Transport and installation can be handled by Buth Graviersysteme. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), machine/vehicle number: DCMS, Year of construction: 2007, Demag manulift chain hoist lifting capacity : 125 kg Lifting height : 2.8m reeving : 1/1 lifting speed : stepless 0.15 - 30m/min version: equipped with suspension eye used in very good condition (fully checked) (new price € 3353,-) Lodpfxog Stp Hs Ammjhh multiple DCMS hoists available

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor Ledpfjx E Tmbox Ammohh • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, Year of construction: 2024, operating hours: 317 h, machine/vehicle number: 34300446, used RENNER RS-PRO 11 (10 bar) oil-injected screw compressor including RENNERtronic Touch controller Ljdpswva Akofx Ammshh Operating hours: 317 Pressure: 10 bar Rated power: 11 kW Delivery quantity at 10 bar: 1.56 Compressed air connection: G 1/2" Sound level: 74 dB(A) Dimensions L x W x H: 540 x 553 x 1014 mm Weight: 216 kg Freight possible for an additional charge. Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2025, operating hours: 80 h, Demonstration machine prototype, available immediately: RENNER RSF REvolution 90 D - (5 to 13 bar) frequency-controlled, direct-drive screw compressor with RENNERtronic Plus Touch control with adjustable pressure range from 5 to 13 bar Operating hours: approx. 80 hours Year of manufacture: 2025 Lhsdpsxpwxyofx Ammjh Pressure: 6 to 13 bar Rated power: 250 kW Delivery volume: at 5 bar: 6.52 to 17.17 m³/min at 6 bar: 6.50 to 17.11 m³/min at 7 bar: 6.47 to 17.02 m³/min at 8 bar: 6.44 to 15.88 m³/min at 9 bar: 6.39 to 15.10 m³/min at 10 bar: 6.32 to 14.25 m³/min at 13 bar: 6.05 to 11.61 m³/min Noise level: 74 dB(A) Dimensions length x width x height: 1997 x 1493 x 1801 mm Weight: 2850 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.able.

Year of construction: 2018, operating hours: 39 h, condition: excellent (used), machine/vehicle number: MA0006_SN817026, Demonstration machine (prototype / zero series) available immediately (Plug and Play): RENNER RS-PRO18,5 - (10 bar) oil-injected screw compressor Control: -RENNERtronic Operating hours: 39 Bh Pressure: 10 bar Rated power: 18.5 kW IE 3 - engine Delivery quantity: 2.45 m³ / min Sound level: 71 dB (A) Compressed air outlet: G 1 1/4 " Lhedpfx Amjd D Tiysmsh Dimensions length x width x height: 1078 x 687 x 1131 mm Weight: 371 kg Operating hours: 39 Bh

Year of construction: 2022, condition: as good as new (ex-display), Exhibit in stock immediately available (Plug and Play): Ljdpfx Amjity Eyjmjhh RENNER RSK-PRO 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 994 x 553 x 1014 mm Weight: 251 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, machine/vehicle number: 21572418, Exhibit in stock immediately available (Plug and Play): RENNER RSK-PRO 15 - 10 bar oil-injected screw compressor with integrated refrigerant dryer Lhodpfx Amjtvgghemeh The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 15 kW Delivery quantity: 2.31 m³ / min Sound level: 72 dB (A) Compressed air outlet: 3/4 " Dimensions length x width x height: 1423 x 684 x 1131 mm Weight: 389 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,700 h, Used screwcompressor immediately available (Plug and Play): RENNER RS-PRO 4,0 (10 bar) oil-injected screw compressor Operating hours: 2700 h Pressure: 10 bar Rated power: 4,0 kW Delivery quantity: 0.55 m³ / min Sound level: 67 dB (A) Compressed air outlet: G 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 151 kg Lhjdotpxhujpfx Ammeh Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Trade fair exhibition machine available immediately (Plug and Play): Frequency-controlled RENNER RSDKF-PRO 7.5 (10 bar) oil-injected screw compressor Lhsdpfx Amsrxu Ahemeh including RENNERtronic Plus Touch control including 2 x galvanized 90 liter compressed air tanks including refrigeration dryer with level-controlled condensate drain including CEE plug Operating hours: 1 Pressure: 10 bar Rated power: 7.5 kW Quantity delivered: Delivery quantity at 10 bar: min. 0.33 m³/min max.: 1.09 m³/min Compressed air connection: G 1/2" Sound level: 62 dB(A) Volume compressed air tank: 2 x 90 liters Dimensions L x W x H: 1120 x 755 x 1550 mm Weight: 369kg Freight possible for an additional charge. Visit our store. We always have a large selection of new and used compressors in stock!

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): Lsdpjity Ecsfx Ammjhh RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: Lhjdpfx Ajrzhflemmsh * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transversal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Lhjdpfx Aeu N Slvsmmsh Max. panel length: 3200 mm